DOI QR코드

DOI QR Code

Characteristics of Buckling Load and Bifurcation in Accordance with Rise-span Ratio of Space Truss Considering Initial Imperfection

초기 불완전성을 고려한 공간 트러스의 분기좌굴과 라이즈-스팬 비에 따른 임계하중 특성

  • 이승재 (한국기술교육대학교 건축공학부) ;
  • 손수덕 (한국기술교육대학교 건축공학부)
  • Received : 2011.08.25
  • Accepted : 2012.06.14
  • Published : 2012.06.27

Abstract

This study investigated the characteristics of bifurcation and the instability due to the initial imperfection of the space truss, which is sensitive to the initial conditions, and the calculated buckling load by the analysis of Eigen-values and the determinant of tangential stiffness. A two-free nodes model, a star dome, and a three-ring dome model were selected as case studies in order to examine the unstable phenomenon due to the sensitivity to Eigen mode, and the influence of the rise-span ratio and the load parameter on the buckling load were analyzed. The sensitivity to the imperfection of the two-free nodes model changed the critical path after reaching the limit point through the bifurcation mode, and the buckling load level was reduced by the increase in the amount of imperfection. The two sensitive buckling patterns for the model can be explained by investigating the displaced position of the free node, and the asymmetric Eigen mode was a major influence on the unstable behavior due to the initial imperfection. The sensitive mode was similar to the in-extensional mechanism basis of the simplified model. Since the rise-span ratio was higher, the effect of local buckling is more prominent than the global buckling in the star dome, and bifurcation on the equilibrium path occurring as the value of the load parameter was higher. Additionally, the buckling load levels of the star dome and the three-ring model were about 50-70% and 80-90% of the limit point, respectively.

본 연구는 초기조건에 민감한 공간 트러스를 대상으로 불완전성으로 인한 분기거동 및 불안정 특성에 대해서 연구하였으며, 접선강성행렬의 행렬식과 고유치해석으로 임계점과 좌굴하중을 구하였다. 고유모드의 민감성에 의한 불안정 현상을 고찰하기 위해서 2-자유절점공간 트러스와 스타 돔 및 3링 돔 모델을 예제로 채택하였으며, 라이즈-스팬 비 및 하중 파라메타에 따른 좌굴하중의 영향을 분석하였다. 2-자유절점 모델의 초기 형상불완전성에 따른 민감성은 고유모드에 따라 임계 후 평형경로가 바뀌었으며, 좌굴하중은 불완전 량의 증가에 따라 감소하는 결과를 얻었다. 예제에서 나타난 두 가지 민감한 좌굴패턴은 자유절점의 변위 위치를 살펴봄으로서 설명할 수 있었고, 형상 불완전성에 따른 거동은 비대칭 고유모드가 가장 큰 영향을 주었다. 민감한 고유모드는 단순화한 모델의 비신장 메커니즘 기저와 유사하였다. 스타 돔 모델은 라이즈-스팬 비가 높을수록 전체좌굴보다는 국부좌굴이 우세하며, 하중 파라메타 값이 클수록 평형경로 상에 분기점이 발생하였다. 또한 스타돔과 3링 모델의 좌굴하중은 각각 극한점 하중레벨의 약 50-70% 및 80-90%로 나타났다.

Keywords

References

  1. 권택진, 김승덕, 김종민(1997) 기하학적 비선형을 고려한 핀접합 단층래티스돔의 불안정 거동에 관한연구, 한국전산구조공학회 학술발표회논문집, 한국전산구조공학회, 제10권, 1집, pp.240-247.
  2. 김승덕(2002) 반강접합 프레임형 대공간 구조물의 비선형 불안정 해석에 관한연구, 대한건축학회논문집 구조계, 대한건축학회, 제18권, 제3호, pp.55-62
  3. 김진기, 한상을(1998) 모드중첩법에 의한 단층래티스돔의 기하 학적 비선형 좌굴거동에 관한연구, 대한건축학회 논문집 구조계, 대한건축학회, 제14권, 제4호, pp.317-325
  4. 손수덕, 김승덕, 이승재, 김종식(2011) 돔형 스페이스 프레임 구조물의 하중모드에 따른 분기점 특성에 관한 연구, 한국공간구조학회 논문집, 한국공간구조학회, 제11권, 제1호, pp.121-130
  5. 손수덕, 김승덕, 황경주, 강문명(2003) 절점 강성을 고려한 공간 구조물의 비선형 불안정 거동에 관한 연구, 한국쉘공간구조학회 논문집, 한국쉘공간구조학회, 제3권, 제1호, pp.87-97.
  6. 윤한흠, 한상을(2000) 래티스돔의 다분기 해석을 위한 알고리즘에 관한연구, 대한건축학회논문집 구조계, 대한건축학회, 제16권, 제9호, pp.3-9
  7. 이경수, 한상을(2009) 공간구조물의 탄성 분기좌굴해석을 위한 수치해석 이론 개발, 한국강구조학회논문집, 한국강구조학회, 제21권, 제6호, pp.563-574
  8. 정환목(1997) 단층 래티스돔의 좌굴특성에 관한 설비하중의 영향, 한국강구조학회논문집, 한국강구조학회, 제9권, 제3호, pp.323- 332.
  9. 정환목(1998) 핀접합 단층래티스돔의 좌굴특성에 관한 형상초기부정의 영향, 한국강구조학회논문집, 한국강구조학회, 제10권, 제4호, pp.769-777.
  10. 정환목, 권영환, 최영식(1993) 삼각형 네트워크 단층 강접 래티스 돔의 좌굴특성에 관한 연구, 대한건축학회논문집, 대한건축학회, 제9권, 제12호, pp.185-194
  11. Abedi, K. and Parke, G.A.R. (1991) Progressive collapse of single-layer braced domes, International Journal of Space Structures, Vol. 11, No. 3, pp.291-306
  12. Bergan, P.G. (1980) Solution algorithms for nonlinear structural problems, Computers and Structures, Vol. 12, pp.497-509. https://doi.org/10.1016/0045-7949(80)90125-X
  13. Bulenda, Th. and Knippers, J. (2001) Stability of grid shells, Computers and Structures, Vol. 79, pp.1161-1174 https://doi.org/10.1016/S0045-7949(01)00011-6
  14. Chan, S.L. and Zhou, Z.H. (1995) Second-order elastic analysis of frames using single imperfect element per member, Journal of Structural Engineering, Vol. 121, No. 6, pp.939-945 https://doi.org/10.1061/(ASCE)0733-9445(1995)121:6(939)
  15. Choong, K.K. and Kim, J.Y. (2001) A numerical strategy for computing the stability boundaries for multi-loading systems by using generalized inverse and continuation method. Engineering structures, Vol. 23, pp.715-724. https://doi.org/10.1016/S0141-0296(00)00071-7
  16. Choong, K.K. and Hangai, Y. (1993) Review on methods of bifurcation analysis for geometrically nonlinear structures, Bulletin of the International Association for Shell and Spatial structures, Vol. 34, No. 112, pp.133-149
  17. Coan, C.H. and Plaut, R.H. (1983) Dynamic stability of a lattice dome, Earthquake Engineering and Structural Dynamics, Vol. 11, pp.269-274. https://doi.org/10.1002/eqe.4290110208
  18. Crisfield, M.A. (1981) A fast incremental/iterative solution procedure that handles "snap-through", Computer and Structures, Vol. 13, pp.55-62 https://doi.org/10.1016/0045-7949(81)90108-5
  19. Deng, H. and Kwan, A.S.K. (2005) Unified classification of stability of pin-jointed bar assemblies, International Journal of Solids and Structures, Vol. 42, pp.4393-4413 https://doi.org/10.1016/j.ijsolstr.2005.01.009
  20. El-Sheikh, A. (1998) Design of space truss structures, Structural Engineering and Mechanics, Vol. 6, No. 2, pp.185-200 https://doi.org/10.12989/sem.1998.6.2.185
  21. Hill, C.D., Blandford, G.E. and Wang, S.T. (1989) Post-bucking analysis of steel space trusses, Journal of Structural Engineering, Vol. 115, No. 4, pp.900-919 https://doi.org/10.1061/(ASCE)0733-9445(1989)115:4(900)
  22. Huseyin, K. (1973) The multi-parameter perturbation technique for the analysis of nonlinear system. International Journal of Nonlinear Mechanics, Vol. 8, No. 5, pp.431-443 https://doi.org/10.1016/0020-7462(73)90035-8
  23. Kato, S., Mutoh, I., and Shomura, M. (1994) Effect on joint rigidity on buckling strength of single layer lattice dome, Bulletin of the International Association for Shell and Spatial structures, Vol. 35, No. 115, pp.101-109
  24. Kim, S.D. (1990) Dynamic stability of shallow structures, Ph.D. dissertation, Tokyo University, Tokyo.
  25. Kim, S.D., Kang, M.M., Kwun, T.J., and Hangai, Y. (1997) Dynamic instability of shell-like shallow trusses considering damping, Computers and Structures, Vol. 64, No. 1-4, pp.481-489 https://doi.org/10.1016/S0045-7949(96)00141-1
  26. Papadrakakis, M. (1981) Post-buckling analysis of spatial structures by vector interaction methods, Computers and Structures, Vol. 14, pp.393-402 https://doi.org/10.1016/0045-7949(81)90059-6
  27. Pellegrino, S. (1993) Structural computations with the singular value decomposition of the equilibrium matrix, Journal of Solids and Structures, Vol. 30, No. 21, pp.3025-3035. https://doi.org/10.1016/0020-7683(93)90210-X

Cited by

  1. Critical Load and Effective Buckling Length Factor of Dome-typed Space Frame Accordance with Variation of Member Rigidity vol.13, pp.1, 2013, https://doi.org/10.9712/KASS.2013.13.1.087
  2. Unstable Behaviour and Critical Buckling Load of Framed Large Spatial Structures in accordance with the Variation of Joint Rigidity vol.14, pp.3, 2014, https://doi.org/10.9712/KASS.2014.14.3.047
  3. Buckling Load of Single-layered Lattice Roof Structure Considering Asymmetric Snow Load vol.15, pp.3, 2015, https://doi.org/10.9712/KASS.2015.15.3.043
  4. An Arrangement Technique for Fine Regular Triangle Grid of Network Dome by Using Harmony Search Algorithm vol.15, pp.2, 2015, https://doi.org/10.9712/KASS.2015.15.2.087