DOI QR코드

DOI QR Code

Impact Test for Measurement of the Carbody Bending Modes of Railway Vehicle

철도차량 차체 굽힘모드 측정을 위한 충격시험

  • Shin, Bum-Sik (Department of Mechanical Engineering, Sungkyungkwan University) ;
  • Choi, Yeon-Sun (Department of Mechanical Engineering, Sungkyungkwan University)
  • Received : 2011.12.06
  • Accepted : 2012.09.06
  • Published : 2012.10.30

Abstract

As the speed of high speed train increases, the prediction of ride comfort becomes important. The exciting frequencies due to rail irregularity in high-speed train closes to the second and third natural frequencies of the carbody. The dynamic characteristics of railway vehicles should be checked by modal analysis numerically and experimentally. In this study the bending test for railway vehicle is reviewed and the impact test is suggested to find the natural frequencies and the mode shapes of the carbody. The validity of the impact test is checked with the test for a sample plate which reflects the aspect ratio of the original carbody. The bending test by the impact and the displacement methods of JIS E7105 for a prototype carbody were done in the field and compared. The results show that the impact test can find more accurate natural frequencies and the mode shapes of the carbody than those of the displacement method.

철도차량의 속도가 증가함에 따라 레일 불균일에 의한 가진주파수의 상승으로 인하여 철도차량의 동특성을 고려한 승차감 예측기술이 중요해지고 있다. 철도차량의 동특성은 전산 모드해석과 더불어 시험적으로 검증되어야 한다. 본 연구에서는 철도차량 차체 굽힘모드 시험을 고찰하고, 이를 대체할 수 있는 방안을 제시하였다. 이를 위해 우선 차체 크기비를 반영한 평판 시편을 제적하고, 이를 기존 시험규격인 JIS E7105방법과 충격시험을 사용한 결과를 비교하여 충격시험의 타당성을 검증하였다. 또한 전산해석을 통하여 이를 재현하였다. 타당성이 검증된 결과를 바탕으로 현장 굽힘모드 시험을 유압가진 대신 충격시험으로 대체 가능성을 검토하였다.

Keywords

References

  1. Japanese Industrial Standard (JIS) E 7105, 1994, "Test Methods for Static Load of Body Structures of Railway Rolling Stock".
  2. J.S. Kim, J.C. Jeong, S.H. Cho, S.I. Seo (2006) "Analytical and Experimental Studies on the Natural Frequency of a Composite Train Carbody," Transactions of the KSME A, 30(4), pp. 357-486. https://doi.org/10.3795/KSME-A.2006.30.4.473
  3. H.J. Jang, K.B. Shin, H.Y. Ko, T.H. Ko (2010) "A Study on the Standardized Finite Element Models for Carbody Structures of Railway Vehicle Made of Sandwich Composites," Journal of the Korean Society for Railway, 13(4), pp. 382-388.
  4. Narita M. (2008) "A Study on Improvements in Frequency Response Function Estimation for Experimental Modal Analysis," Transport Technology Research Report.
  5. B.S. Shin, Y.S. Choi, J.C. Koo, S.W. Lee, S.L. Lee (2009) "Ride comfort of high-speed train with flexible car-body," Transactions of the KSME A, 35(4), pp. 341-346. https://doi.org/10.3795/KSME-A.2011.35.4.341
  6. J.F. Murphy (1997) "Transverse Vibration of a Simply Supported Beam with Symmetric Overhang of Arbitrary Length," Journal of Testing and Evaluation, JTEVA, 25(5), pp. 522-524.
  7. Star Modal System, Ver 6.4, SEPCTRAL DYNAMICS 2010.
  8. SAMCEF field. SAMTECH. 2011.
  9. S.G. Baek, B.S. Shin, J.H. Choi, S.W. Lee, Y.S. Choi, J.C. Koo (2009) "Vibration Analysis of High-Speed EMU Car Body Using Equivalent Stiffness and Shell Element," Conference of KSR, pp. 217-222.