Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Preparation of Porous SiC Ceramics Using Polycarbosilane Derivatives as Binding Agents

폴리카보실란계 바인더를 이용한 다공성 SiC 세라믹스의 제조

  • Park, Jihye (School of Biological Sciences and Chemistry, Institute of Basic Science, Sungshin Women's University,) ;
  • Kim, Younghee (Energy materials Center, Korea Institute of Ceramic Engineering and Technology) ;
  • Jung, Miewon (School of Biological Sciences and Chemistry, Institute of Basic Science, Sungshin Women's University,)
  • 박지혜 (성신여자대학교 생명과학.화학부/기초과학연구소) ;
  • 김영희 (한국세라믹기술원 에너지소재센터) ;
  • 정미원 (성신여자대학교 생명과학.화학부/기초과학연구소)
  • Received : 2012.07.30
  • Accepted : 2012.09.11
  • Published : 2012.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Porous SiC ceramics were prepared by using recycled SiC sludge, which is an industrial waste generated from solar cell industry. Polycarbosilane derivatives, such as polycarbosilane (PCS), polyphenylcarbosilane (PPCS) and hydridopolycarbosilane (HPCS) were used as binding agents for the fabrication of porous SiC ceramics at $1800^{\circ}C$ under Ar atmosphere. The effects of the various binding agents having different C/Si ratios were discussed on the sintering and porosity of the SiC ceramics. The prepared porous SiC ceramics were characterized by X-ray Diffraction (XRD) and Field-Emission Scanning Electron Microscope (FE-SEM). Thermal conductivity and porosity of SiC ceramics were measured at room temperature, and they were 56.7W/mK and 29.8%, respectively.

Keywords

References

  1. G. Amirthan, A. Udaya Kumar, and M. Balasubramanian, "Thermal Conductivity Studies on Si/SiC Ceramic Composites," Ceram. Int., 37 [1] 423-26 (2011). https://doi.org/10.1016/j.ceramint.2010.09.003
  2. S. H. Kim, Y. W. Kim, J. Y. Yun, and H. D. Kim, "Fabrication of Porous SiC Ceramics by Partial Sintering and Their Properties," J. Kor. Ceram. Soc., 41 [7] 541-47 (2004). https://doi.org/10.4191/KCERS.2004.41.7.541
  3. M. Takeda, A. Saeki, J. Sakamoto, Y. Imai, and H. Ichikawa, "Properties of Polycarbosilane-Derived Silicon Carbide Fibers with Various C/Si Compositions," Compos. Sci. Technol., 59 [6] 787-92 (1999). https://doi.org/10.1016/S0266-3538(99)00009-3
  4. J. I. Kim, W. J. Kim, and J. Y. Park, "Variation of Yield and Oxygen Content of SiC-Based Ceramics with the Conversion Processes of PCS," J. Kor. Ceram. Soc., 42 [3] 188-92 (2005). https://doi.org/10.4191/KCERS.2005.42.3.188
  5. K. Yoshida and T. Yano, "Room and High-temperature Mechanical and Thermal Properties of SiC Fiber-Reinforced SiC Composite Sintered under Pressure," J. Nucl. Mater., 283-287 [1] 560-64 (2000). https://doi.org/10.1016/S0022-3115(00)00212-9
  6. S. Zhu, S. Ding, H. Xi, and R. Wang, "Low-temperature Fabrication of Porous SiC Ceramics by Preceramic Polymer Reaction Bonding," Mater. Lett., 59 [5] 595-97 (2005). https://doi.org/10.1016/j.matlet.2004.11.003
  7. I. H. Song, M. J. Park, H. D. Kim, Y. W. Kim, and J. S. Bae, "Microstructure and Permeability Property of Si Bonded Porous SiC with Variations in the Carbon Content," J. Kor. Ceram. Soc., 47 [6] 546-52 (2010). https://doi.org/10.4191/KCERS.2010.47.6.546
  8. L. V. Interrante, K. Moraes, Q. Liu, N. Lu, A. Puerta, and L. G. Sneddon, "Silicon-based Ceramics from Polymer Precursors," Pure Appl. Chem., 74 [11] 2111-17 (2002). https://doi.org/10.1351/pac200274112111
  9. H. Li, L. Zhang, L. Cheng, Z. Yu, M. Huang, H. Tu, and H. Xia, "Effect of Curing and Pyrolysis Processing on the Ceramic Yield of a Highly Branched Polycarbosilane," J. Mater. Sci., 44 [3] 721-25 (2009). https://doi.org/10.1007/s10853-008-3176-y
  10. Y. J. Lee, J. H. Lee, S. R. Kim, W. T. Kwon, H. J. Oh, J. H. Park Klepeis, S. J. Teat, and Y. H. Kim, "Synthesis and Characterization of Novel Preceramic Polymer for SiC," J. Mater. Sci., 45 [4] 1025-31 (2010). https://doi.org/10.1007/s10853-009-4034-2

Cited by

  1. Effect of SiC Filler Content on Microstructure and Flexural Strength of Highly Porous SiC Ceramics Fabricated from Carbon-Filled Polysiloxane vol.49, pp.6, 2012, https://doi.org/10.4191/kcers.2012.49.6.625
  2. Effect of Additive Composition on Flexural Strength of Cullet-Loess Tile Bodies vol.50, pp.6, 2013, https://doi.org/10.4191/kcers.2013.50.6.416
  3. Composite Membrane by Dip-coating Process vol.50, pp.6, 2013, https://doi.org/10.4191/kcers.2013.50.6.485
  4. Effect of Clay-Mineral Composition on Flexural Strength of Clay-based Membranes vol.51, pp.5, 2014, https://doi.org/10.4191/kcers.2014.51.5.380
  5. Flexural Strength of Polysiloxane-Derived Strontium-Doped SiOC Ceramics vol.52, pp.1, 2015, https://doi.org/10.4191/kcers.2015.52.1.61
  6. Gas Permeation of Y2O3-SiC Composite Membrane vol.52, pp.4, 2015, https://doi.org/10.4191/kcers.2015.52.4.234
  7. Preparation and Permeation of La2Ce2O7 Membrane vol.52, pp.4, 2015, https://doi.org/10.4191/kcers.2015.52.4.269
  8. Fabrication and Characterization of CeO2-NiO/SiC Membranes for Hydrogen Permeation vol.353, pp.1662-9507, 2014, https://doi.org/10.4028/www.scientific.net/DDF.353.143
  9. C/Si 몰 비가 TEOS와 페놀수지를 출발원료 사용하여 합성된 β-SiC 분말의 특성에 미치는 영향 vol.50, pp.1, 2012, https://doi.org/10.4191/kcers.2013.50.1.31