DOI QR코드

DOI QR Code

Applications of MEMS-MOSFET Hybrid Switches to Power Management Circuits for Energy Harvesting Systems

  • Song, Sang-Hun (School of Electrical and Electronics Engineering, Chung-Ang University) ;
  • Kang, Sungmuk (School of Electrical and Electronics Engineering, Chung-Ang University) ;
  • Park, Kyungjin (School of Electrical and Electronics Engineering, Chung-Ang University) ;
  • Shin, Seunghwan (School of Electrical and Electronics Engineering, Chung-Ang University) ;
  • Kim, Hoseong (School of Electrical and Electronics Engineering, Chung-Ang University)
  • Received : 2012.06.25
  • Published : 2012.11.20

Abstract

A hybrid switch that uses a microelectromechanical system (MEMS) switch as a gate driver of a MOSFET is applied to an energy harvesting system. The power management circuit adopting the hybrid switch provides ultralow leakage, self-referencing, and high current handling capability. Measurements show that solar energy harvester circuit utilizing the MEMS-MOSFET hybrid switch accumulates energy and charges a battery or drive a resistive load without any constant power supply and reference voltage. The leakage current during energy accumulation is less than 10 pA. The power management circuit adopting the proposed hybrid switch is believed to be an ideal solution to self-powered wireless sensor nodes in smart grid systems.

Keywords

References

  1. R. Amirtharajah and A. P. Chandrakasan, "Self-powered signal processing using vibration-based power generation," IEEE J. Solid-State Circuits, Vol. 33, No. 5, pp. 687-695, May 1998. https://doi.org/10.1109/4.668982
  2. C. O. Mathuna, T. O'Donnell, R. V. Martinez-Catala, J. Rohan, and B. O'Flynn, "Energy harvesting for long-term deployable wireless sensor networks," Talanta, Vol. 75, No. 3, pp. 613-623, May 2008. https://doi.org/10.1016/j.talanta.2007.12.021
  3. N. Kong and D. Ha, "Low-power design of a self-powered piezoelectric energy harvesting system with maximum power point tracking," IEEE Trans. Power Electron., Vol.27, No. 5, pp.2298-2308, May 2012. https://doi.org/10.1109/TPEL.2011.2172960
  4. G. D. Szarka, B. H. Stark, and S. G. Burrow, "Review of power conditioning for kinetic energy harvesting system," IEEE Trans. Power Electron., Vol.27, No. 2, pp.803-815, Feb. 2012. https://doi.org/10.1109/TPEL.2011.2161675
  5. S. Cheng, R. Sathe, R. Natarajan, and D. P. Arnold, "A voltage-multiplying self-powered AC/DC converter with 0.35-V minimum input voltage for energy harvesting applications," IEEE Trans. Power Electron., Vol.26, No. 9, pp.2542-2549, Sep. 2011. https://doi.org/10.1109/TPEL.2011.2109969
  6. Y. Sun, N. H. Hieu, C-J Jeong, S-G Lee, "An Integrated High-Performance Active Rectifier for Piezoelectric Vibration Energy Harvesting System," IEEE Trans. Power Electron., Vol.27, No. 2, pp.623-627, Feb. 2012. https://doi.org/10.1109/TPEL.2011.2162078
  7. G.-B. Chung and K. D. T. Ng, "Analysis of an AC/DC Resonant Pulse Power Converter for Energy Harvesting Using a Micro Piezoelectric Device," Journal of Power Electronics, Vol. 5, No.4, pp.247-256, Oct. 2005.
  8. S. Roundy, P.K. Wright, and J. M. Rabaey, Energy Harvesting for Wireless Sensor Networks, Kluwer Academic Publishers, Chap. 1, 2003.
  9. N. S. Shenck and J. A. Paradiso, "Energy harvesting with shoe-mounted piezoelectrics," IEEE Micro, Vol. 21, No. 3, pp. 30-42, May/Jun. 2001. https://doi.org/10.1109/40.928763
  10. R. Kasim, B. Kim, and J. Drobnik, "Advanced MEMS for high power integrated distribution systems," Proc. 2005 ICMENS, p. 247, Jul. 2005.
  11. T. Shimamura, M. Ugajin, K. Kuwabara, K. Takagahara, K. Suzuki, H. Morimura, M. Harda, and S. Mutoh, "MEMS-switch-based Power Management with Zero-power Voltage Monitoring for Energy Accumulation Architecture on Dust-size Wireless Sensor Nodes," IEEE Symposium on VLSI Circuits, Digest of technical papers, pp. 276-277, Jun. 2011.
  12. H. Kim, S. M. Kang, K. J. Park, Y.-R. Kim, and C.-W. Baek, "Micro-electro-mechanical system/ field- effect- transistor hybrid switch for energy harvesting system," Jpn. J. Appl. Phys., Vol. 49, No. 6, pp. 06GN19-1-06GN19-3, Jun. 2010. https://doi.org/10.1143/JJAP.49.06GN19
  13. J.-M. Kim, J.-H. Park, C.-W. Baek, and Y.-K. Kim, "The SiOG-based Single-crystalline Silicon (SCS) RF MEMS Switch with Uniform Characteristics," J. Micro-electromech. Syst., Vol. 13, No. 6, pp. 1036-1042, Dec. 2004. https://doi.org/10.1109/JMEMS.2004.838365
  14. S.C.L. Yuen, J.M.H. Lee, W.J. Li, and P.H.W. Leong, "An AA-sized vibration-based microgenerator for wireless sensors," IEEE Pervasive Comput., Vol. 6, No. 1, pp. 64-72, Jan. 2007.
  15. S. M. Kang, K. J Park, S. H. Shin, K. S. Chang, and H. Kim, "Zero standby power remote control system using light power transmission," IEEE Trans. Consum. Electron., Vol. 57, No. 4, pp.1622-1627, Nov. 2011. https://doi.org/10.1109/TCE.2011.6131134