DOI QR코드

DOI QR Code

Performance Simulation of a R744 Refrigeration System in a Refrigerator Truck under a Frost Condition

착상조건에서 R744 냉매 적용 탑차용 냉장시스템의 성능해석

  • Kim, Sang Hun (Graduate School of Mechanical Engineering, Chosun University) ;
  • Myoung, Chi Wook (Graduate School of Mechanical Engineering, Chosun University) ;
  • Cho, Hong Hyun (Department Mechanical Engineering, Chosun University)
  • 김상훈 (조선대학교 기계공학과 대학원) ;
  • 명치욱 (조선대학교 기계공학과 대학원) ;
  • 조홍현 (조선대학교 기계공학과)
  • Received : 2013.05.06
  • Published : 2013.09.10

Abstract

R744 has been appropriated for substitute refrigerant, because of its high stability, and environment-friendly nature as a natural refrigerant. To analyze the cooling performance of a refrigeration system in a refrigerator truck using R744 according to the blocking ratio, an analytical model of the refrigeration system was developed under frost conditions, using EES. The performance of the refrigeration system was predicted with the indoor and outdoor air temperature, outdoor air velocity, and compressor speed. As a result, the system performance decreased, with the increase of frost growth. When the blocking ratio was 40.4% in the basic condition, the refrigeration capacity was decreased by 27.1%, compared to the non-frost condition.

Keywords

References

  1. Yang, D. K., Lee, K. S., and Song, S., 2006, Modeling for predicting frosting behavior of a fin tube heat exchanger, International Journal of Heat and Mass Transfer, Vol. 49, pp. 1472-1479. https://doi.org/10.1016/j.ijheatmasstransfer.2005.09.022
  2. Getu, H. M. and Bansal, P. K., 2011, New frost property correlations for a flat finned tube heat exchanger, International Journal of Thermal Sciences, Vol. 50, pp. 544-557. https://doi.org/10.1016/j.ijthermalsci.2010.11.007
  3. Moon, J. C., 2010, Development of high efficient refrigerated vehicle using thermal storage, SAREK, Vol. 39, No. 12, pp. 36-42.
  4. ISO 15502, 2005, Household refrigerating appliances characteristics and test methods, International Organization for Standardization, Geneva, Switzerland.
  5. EES : Engineering Equation Solver, 2006, F-Chart Software Inc.
  6. Sanchez, D., Torrella, E., Cabello, R., and Liopis, R., 2010, Influence of the superheat associated to a semihermetic compressor of a transcritical $CO_{2}$ refrigeration plant, Applied Thermal Engineering, Vol. 30, pp. 302-309. https://doi.org/10.1016/j.applthermaleng.2009.09.008
  7. Yoon, S. H., Cho, E. S., Hwang, Y. W., Kim, M. S., Min, K. D., and Kim, Y. C., 2004, Characteristics of evaporative heat transfer and pressure drop of carbon dioxide and correlation development, International Journal of Refrigeration, Vol. 27, pp. 111-119. https://doi.org/10.1016/j.ijrefrig.2003.08.006
  8. Wang, C. C., Lee, W. S., and Sheu, W. J., 2001, A comparative study of compact enhanced fin and tube heat exchangers, International Journal of Heat and Mass Transfer, Vol. 44, pp. 3565-3573. https://doi.org/10.1016/S0017-9310(01)00011-4
  9. Aoki, K., Hattori, M., and Akita, K., 1990, A study of extended surface heat exchanger with frosting; 2nd Report, Heat Transfer and Pressure Drop for Each Row, JSME, Vol. 97, pp. 793-802.
  10. Sanders, C. T., 1974, The influence of frost formation and defrosting on the performance of air coolers, Ph.D. thesis, Technische Hoge-school, Delft, Netherlands.
  11. Hayashi, Y., Aoki, A., Adachi, S., and Hori, K., 1977, Study of frost properties correlating with frost formation types, ASME J. Heat Transfer, Vol. 99, pp. 239-245. https://doi.org/10.1115/1.3450675
  12. Hwang, Y. W. and Kim, O. J, 2007, Experimental study on the CO2 flow through electronic expansion valves, Proceedings of the SAREK'07 Summer Annual Conference, pp. 1237-1241.