설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제25권12호
  • /
  • Pages.647-653
  • /
  • 2013
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지
DOI QR코드

DOI QR Code

PCM을 활용한 구체축열시스템의 축열 및 방열 특성 연구

Study on the Characteristics of Thermal Output and Thermal Storage in a Thermally Activated Building System with Phase Change Material

  • 이현화 (이화여자대학교 건축공학과) ;
  • 이수진 (이화여자대학교 건축공학과) ;
  • 송진희 (이화여자대학교 건축공학과) ;
  • 김수민 (숭실대학교 건축학부) ;
  • 임재한 (이화여자대학교 건축공학과) ;
  • 송승영 (이화여자대학교 건축공학과)
  • Lee, Hyunhwa (Department of Architectural Engineering, Ewha Womans University) ;
  • Lee, Soojin (Department of Architectural Engineering, Ewha Womans University) ;
  • Song, Jinhee (Department of Architectural Engineering, Ewha Womans University) ;
  • Kim, Sumin (School of Architecture, Soongsil University) ;
  • Lim, Jaehan (Department of Architectural Engineering, Ewha Womans University) ;
  • Song, Seung-Yeong (Department of Architectural Engineering, Ewha Womans University)
  • 투고 : 2013.08.05
  • 발행 : 2013.12.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

TABS (Thermally Activated Building System) has recently applied by huge commercial buildings, airports, and convention centers in Europe. TABS provides night-time thermal storage by heating or cooling. The embedded water-based heating and cooling system uses the high thermal inertia of concrete in the building construction, in which a heating or cooling pipe is embedded. The aim of this study is to analyze the thermal storage and thermal output of TABS applied with PCM (Phase Change Material). To achieve this, prototypes of TABS and the thermal properties of various PCMs were investigated. By using the simulation program Physibel Voltra 6.0 W, the thermal storage and thermal output were evaluated according to a heating and cooling operation schedule.

키워드

참고문헌

  1. Yoon, D. H., Choi, B. S., and Hong, H. K., 2006, Experiment and property study of Ondol panel based on phase change material, The Society of Air-conditioning and Refrigerating Engineers of Korea, pp. 122-125.
  2. Cho, S. and Sohn, J. Y., 1992, Indoor air temperature distribution in a floor heating space with PCM panels, Journal of the Architectural Institute of Korea, pp. 81-88.
  3. Cho, S., Yoo, J. I., and Chung, H. S., 1990, The characteristics of heat storage and emission of PCM in Ondol system, Solar Energy, Vol. 10, No. 2, pp. 38-43.
  4. Choi, J. H., Sohn, K., Park C. H., and Hong, H. K., 2000, Consideration on the measurement method of heat of fusion and specific heat of PCMs used as latent heat storage materials, Proceedings of the SAREK 2000 winter annual conference, pp. 277-281.
  5. Jeong, S. G., Jeon, J. S., Seo, J. K., and Kim, S. M., 2011, Consideration for application phase change material(PCM) for building energy saving, March of KIAEBS, Vol. 5, No. 1, pp. 7-15.
  6. Celilia, C., Marc, M., Joan, R., Luisa, F. C., Maria, E. N., Ana, I. F., Ana, L., and Belen, Z., 2010, Effect of microencapsulated phase change material in sandwich panels, Renewable Energy, Vol. 35, No. 10, pp. 2370-2374. https://doi.org/10.1016/j.renene.2010.03.030
  7. Kuznik, F. and Virgone, J., 2009, Experimental assessment of phase change material for wall building use, Applied Energy, Vol. 86, No. 10, pp. 2038-2046. https://doi.org/10.1016/j.apenergy.2009.01.004
  8. Lehmann, B., Dorer, V., and Koschenz, M., 2007, Application range of thermally activated building systems, Energy and Buildings, Vol. 39, No. 5, pp. 593-598. https://doi.org/10.1016/j.enbuild.2006.09.009
  9. Meierhans, R. and Olesen, B. W., 2002, Art museum in Bregenz-soft HVAC for strong architecture, ASHRAE Transactions 108 PART 2, pp. 708-713.
  10. Pomianowiski, M. Z., Heiselberg, P., and Jensen, R. L., 2011, Initial development of a combined PCM and TABS solutions for heat storage and cooling, Proceeding of the 9th Nordic Symposium on Building Physics Vol. 1, pp. 483-490.
  11. Schossig, P., Henning, H.-M., Gschwander, S., and Haussmann, T., 2005, Micro-encapsulated phase change materials integrated into construction materials, Solar Energy Materials and Solar Cells, Vol. 89, No. 2/3, pp. 297-306. https://doi.org/10.1016/j.solmat.2005.01.017
  12. Tyagi, V. V., Kaushik, S. C., Tyagi, S. K., and Akiyama, T., 2011, Development of phase change materials based micro-encapsulated technology for buildings：A review, Renewable and Sustainable Energy Reviews, Vol. 15, No. 2, pp. 1373-1391. https://doi.org/10.1016/j.rser.2010.10.006
  13. Zhang, Y. P., Lin, K. P., Yang, R., Di, H. F., and Jiang, Y., 2006, Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings, Energy and Buildings, Vol. 38, No. 10, pp. 1262-1269. https://doi.org/10.1016/j.enbuild.2006.02.009
  14. Mehling, H. and Cabza, L. F., 2008, Heat and cold storage with PCM, An up-to-date introduction into basics and applications.

피인용 문헌

  1. Preparation of Rayon Filament based Woven Fabric and PCM Treatment for Developing Cool Touch Summer Clothing Material vol.16, pp.2, 2014, https://doi.org/10.5805/SFTI.2014.16.2.326