한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제22권6호
  • /
  • Pages.931-936
  • /
  • 2013
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

대면적 전자빔 폴리싱 공정 시 발생하는 온도 분포 유한요소해석 연구

Finite Element Analysis of Large-Electron-Beam Polishing-Induced Temperature Distribution

  • Kim, J.S. (Ulsan National Institute of Science and Technology (UNIST)) ;
  • Kim, J.S. (Korea Institute of Industrial Technology (KITECH)) ;
  • Kang, E.G. (Korea Institute of Industrial Technology (KITECH)) ;
  • Lee, S.W. (Korea Institute of Industrial Technology (KITECH)) ;
  • Park, H.W. (Ulsan National Institute of Science and Technology (UNIST))
  • 투고 : 2013.08.16
  • 심사 : 2013.12.08
  • 발행 : 2013.12.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, the use of large-electron-beam polishing for polishing complex metal surfaces has been proposed. In this study, the temperature induced by a large electron beam was predicted using the heat transfer theory. A finite element (FE) model of a continuous wave (CW) electron beam was constructed assuming Gaussian distribution. The temperature distribution and melting depth of an SUS304 sample were predicted by changing electron-beam polishing process parameters such as energy density and beam velocity. The results obtained using the developed FE model were compared with experimental results for verifying the melting depth prediction capability of the developed FE model.

키워드

참고문헌

  1. Uno, Y., Okada, A., Uemura, K., Raharjo, P., Sano, S., Yu, Z., Mishima, S., 2007, A new polishing method of metal mold with large-area electron beam irradiation, Journal of Materials processing technology, 187-189 77-80.
  2. Kim, D. M., Kim, J. S., Park, S. S., Park, H. W., Ki, H. S., 2012, Surface modification of the patterned Al6061/SUS304 metal plates using the large electron beam, Applied surface science, 261 458-463. https://doi.org/10.1016/j.apsusc.2012.08.032
  3. Okada, A., Uno, Y., MCGeough, A., Fujiwara, K., Doi, K., Uemura, K., Sano, S., 2008, Surface finishing of stainless steels for orthopedic surgical tools by large-area electron beam irradiation, CIRP Annals - Manufacturing Technology, 57 223-226. https://doi.org/10.1016/j.cirp.2008.03.062
  4. Incropera, F. P., Dewitt, D. P., Bergman, T. L., Lavine, A. S., 2007, Fundamentals of Heat and Mass Transfer, Wiley, United States.
  5. Goldak, J., Chakravarti, A., Bibby, M., 1984, A new finite element model for welding heat sources, Metallurgical transactions B, 15 134 59-69. https://doi.org/10.1007/BF02661063
  6. Nguyen, N. T., Ohta, A., Matsuoka, K., Suzuki, N., Maeda, Y., 1999, Analytical Solutions for Transient Temperature of Semi-Infinite Body Subjected to 3-D Moving Heat Sources, Welding research, 265-274.
  7. Tsirkas, S. A., Papanikos, P., Kermanidis, Th., 2003, Numerical simulation of the laser welding process in butt-joint specimens, Journal of Materials Processing Technology, 134 59-69. https://doi.org/10.1016/S0924-0136(02)00921-4
  8. Fitting, H. J., 1975, The energy loss of transmitted and backscattered electrons, Journal of applied physics, 8 1480-1486.

피인용 문헌

  1. Analysis of Temperature Variation by Structural Arrangement of Internal Heat Sources in Radar Shelters vol.36, pp.2, 2013, https://doi.org/10.7736/kspe.2019.36.2.115