DOI QR코드

DOI QR Code

Analytical Study on Hybrid Precast Concrete Beam-Column Connections

하이브리드 프리캐스트 보-기둥 접합부의 해석적 연구

  • Choi, Chang-Sik (Dept. of Architectural Engineering, Hanyang University) ;
  • Kim, Seung-Hyun (Dept. of Architectural Engineering, Hanyang University) ;
  • Choi, Yun-Cheul (Dept. of Architectural Environmental Engineering and Building Service, ChungWoon Univ.) ;
  • Choi, Hyun-Ki (Dept. of Architectural Engineering, Hanyang University)
  • 최창식 (한양대학교 건축공학과) ;
  • 김승현 (한양대학교 건축공학과) ;
  • 최윤철 (청운대학교 건축설비소방학과) ;
  • 최현기 (한양대학교 건축공학과)
  • Received : 2013.06.26
  • Accepted : 2013.08.13
  • Published : 2013.12.31

Abstract

Non-linear finite element analysis for newly developed precast concrete details for beam-to-column connection which can be used in moderate seismic region was carried out in this study. Developed precast system is based on composite structure and which have steel tube in column and steel plate in beam. Improving cracking strength of joint under reversed cyclic loading, joint area was casted with ECC (Engineering Cementitious Composites). Since this newly developed precast system have complex sectional properties and newly developed material, new analysis method should be developed. Using embedded elements and models of non-linear finite element analysis program ABAQUS previously tested specimens were successfully analyzed. Analysis results show comparatively accurate and conservative prediction. Using finite element model, effect of axial load magnitude and flexural strength ratio were investigated. Developed connection have optimized performance under axial load of 10~20% of compressive strength of column. Plastic hinge was successfully developed with flexural strength ratio greater than 1.2.

이 연구에서는 기존에 수행된 시공성과 경제성이 향상되고 중진 지역에서 사용 가능한 새로운 프리캐스트 콘크리트 보-기둥 접합상세의 비선형 유한요소해석이 수행되었다. 해당 상세는 복합구조를 기반으로 함으로써 기둥 내에는 각관을 보유하고 있으며 보에는 강판이 매입되어 있는 복잡한 단면을 보유하고 있다. 또한 콘크리트와 강재뿐만 아니라 ECC라는 새로운 재료를 사용함에 따라 요소의 선택 및 재료모델의 결정에 대한 방법론을 제시하였다. 비선형 유한요소해석은 상용 유한요소해석 프로그램인 ABAQUS를 통해 수행되었으며 요소 및 재료 모델은 ABAQUS에서 제공하는 모델들을 사용하였다. 비선형 유한요소해석 결과 기 수행되었던 실험 결과에 유사하거나 보수적으로 평가함으로써 변수분석에 사용할 수 있을 것으로 판단하였다. 구축된 유한요소해석 모델을 통해 해당 상세의 성능에 대한 압축력의 영향, 휨강도비의 영향에 대해 분석하였다. 압축력의 경우 기둥 압축강도의 10~20%에서 가장 좋은 성능을 발휘할 수 있었으며, 휨강도비 1.2 이상에서 기둥의 항복 없이 보의 소성힌지를 유도할 수 있음을 확인하였다.

Keywords

References

  1. ACI T1.1R-01, "Commentary on Acceptance Criteria for Moment Frames Based on Structural Testing," ACI Manual of Concrete Practice, ACI, 2002, pp. 1-7.
  2. Paulay, T. and Priestley, M. J. N., Seismic Design of Reinforced Concrete and Masonry Buildings, A Wiley Insterscience Publication, 1992, pp. 250-263.
  3. Ha, S. S., Kim, S. H., Moon, J. H., and Lee, L. H., "An Experimental Study on the Structural Behavior of the half PC Beam-Column Interior Joint with Strand," Journal of Architectural Institute of Korea (AIK), Vol. 23, No. 9, 2007, pp. 3-11.
  4. Restrepo, J. I., Park, R., and Buchanan, A. H., "Test on Connections of Earthquake Resisting Precast Reinforced Concrete Perimeter Frames of Buildings," PCI Journal, Vol. 40, No. 4, 1995, pp. 44-61.
  5. Abdel-Fattah, B. A. and Wight, J. K., "Study of Moving Beam Plastic Hinging Zones for Earthquake Resistiong Design of RC Buildings," ACI Structural Journal, Vol. 84, No. 1, 1987, pp. 31-39.
  6. Choi, H. K., Yoo, C, H,, Choi. Y. C., and Choi, C. S., "Structural Capacity Evaluation of Hybrid Precast Concrete Beam-Column Connections Subjected to Cyclic Loading," Journal of the Korea Concrete Institute, Vol. 22, No. 3, 2010, pp. 325-333. (doi: http://dx.doi.org/10.4334/JKCI.2010.22.3.325)
  7. Choi, H. K., Choi. Y. C., and Choi, C. S., "Hysteretic Behavior and Seismic Resistant Capacity of Precast Concrete Beam-to-Column Connections," Earthquake Engineering Society of Korea (EESK), Vol. 14, No. 4, 2010, pp. 61-71. https://doi.org/10.5000/EESK.2010.14.4.061
  8. Hawileh, R., Rahman A., and Tabatabai, H., "Nonlinear Finite Element Analysis and Modeling of a Precast Hybrid Beam-Column Connection Subjected to Cyclic Loads," Applied Mathematical Modelling, Vol. 34, No. 9, 2010, pp. 2562-2583. https://doi.org/10.1016/j.apm.2009.11.020
  9. Priestley, M. J. N., "Overview of PRESSS Research Program," PCI Journal, Vol. 36, No. 4, 1991, pp. 50-57. https://doi.org/10.15554/pcij.07011991.50.57
  10. Camarena, D., "Finite Element Analysis of Precast Prestressed Beam-Column Concrete Connection in Seismic Construction," Chalmers University of Technology, Master's Thesis, 2006.
  11. Han, T. S., Feenstra, P. H., and Illington, S. L., "Simulation of Highly Ductile Fiber-Reinforced Cement- Based Composite Components Under Cyclic Loading," ACI Structural Journal, Vol. 100, No. 6, 2003, pp. 749-757.
  12. ABAQUS Theory Manual: Karlsson & Sorensen, Inc.
  13. Lee, J. and Fenves, G. L., "Plastic-Damage Model for Cyclic Loading of Concrete Structures," Journal of Engineering Mechanics, Vol. 124, No. 8, 1998, pp. 892-900. (doi: http://dx.doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892))
  14. Mittelstadt, J., Numerical Studies on Composite Action with Concrete Filled Hollow Section Columns, Studienarbeit of TUHH Matr. Nr. 30978, 2008, pp. 7-12.
  15. NZS 3101: Part 1, Concrete Structures Standard (NZS 3101:1995), Standard Association of New Zealand, Willington, New Zealand, 1995, pp. 133-136.
  16. ACI-ASCE Committee 352, Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures (ACI 352R-02), American Concrete Institute, Farmington Hills, Mich, 2002, pp. 1-37.
  17. Lin, C. M. and Restreop, J. I., "Seismic Behaviour and Design of Reinforced Concrete Interior Beam-Column Joints," Bulletin of the New Zealand for Society Earthquake Engineering, Vol. 35, No. 2, 2002, pp. 108-128.
  18. Fu, J. P., Chen, T., Wang, Z., and Bai, S., "Effect of Axial Load Ratio on Seismic Behaviour of Interior Beam- Column Joints," 12th World Conference on Earthquake Engineering, Auckland, New Zealand (12WCEE), 2000, pp. 1-5.
  19. Park, R. and Paulay, T., Reinforced Concrete Structures, John Wiley & Sons, 1975. pp. 11-47.