Elastomers and Composites

  • 제48권4호
  • /
  • Pages.269-275
  • /
  • 2013
  • /
  • 2092-9676(pISSN)
  • /
  • 2288-7725(eISSN)
한국고무학회 (The Rubber Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

도입된 High α-olefin의 사슬길이 변화에 따른 삼원공중합체 특성 변화

Changes of Characteristic of Terpolymers according to the Chain Length of Incorporated High α-olefins

  • 투고 : 2013.09.10
  • 심사 : 2013.10.30
  • 발행 : 2013.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 여러가지 메탈로센 촉매 및 trityl tetrakis(pentafluorophenyl)borate/triisobutylaluminium 공촉매 시스템을 이용하여 에틸렌, high ${\alpha}$-olefin 및 divinylbenzene으로 구성된 삼원공중합체를 중합하였다. 우선 삼원공중합체 중합에 있어서, 최적의 촉매를 확보하기 위해 rac-$Et(Ind)_2ZrCl_2$, rac-$SiMe_2(Ind)_2ZrCl_2$, rac-$SiMe_2(2-Me-Ind)_2ZrCl_2$ 등의 메탈로센 촉매들과 trityl tetrakis(pentafluorophenyl)borate/triisobutylaluminium 공촉매 시스템을 이용하여 삼원공중합체의 촉매활성도, 분자량 및 분자량 분포도를 비교하였다. 공단량체로 투입되는 high ${\alpha}$-olefin의 사슬 길이 변화가 삼원공중합에 미치는 영향을 살펴보기 위해 여러 가지 중합 조건들은 동일하게 유지하면서 1-hexene, 1-octene, 1-decene 또는 1-dodecene을 도입한 삼원공중합체들을 각각 합성하였다. 이와 같이 준비한 삼원공중합체들의 화학 조성, 열적 특성 및 기계적 물성 등을 비교 분석하였다.

In this study, we prepared poly(ethylene-ter-1-hexene-ter-divinylbenzene) using various metallocene catalysts with trityl tetrakis(pentafluorophenyl)borate/triisobutylaluminium cocatalysts system. We tried rac-$Et(Ind)_2ZrCl_2$, rac-$SiMe_2(Ind)_2ZrCl_2$, and rac-$SiMe_2(2-Me-Ind)_2ZrCl_2$ to choose optimum metallocene catalyst, comparing with catalytic activity, molecular weight, molecular weight distribution of the terpolymers. To study the effects of chain length of high ${\alpha}$-olefins on the terpolymerization, we synthesized the terpolymers using 1-hexene, 1-octene, 1-decene or 1-dodecene. We characterized chemical composition, thermal properties, and mechanical properties of the terpolymers.

키워드

참고문헌

  1. M. A. Villar and M. L. Ferreira, "Co- and terpolymerization of ethylene, propylene, and higher alpha-olefins with high propylene contents using metallocene catalysts", J. Polym. Sci. PartA : Polym. Chem., 39, 1136 (2001). https://doi.org/10.1002/1099-0518(20010401)39:7<1136::AID-POLA1090>3.0.CO;2-5
  2. F. Fernanda, E. Nunes, and B. G. Griselda, "13Carbon Nuclear Magnetic Resonance of Ethylene-.Propylene-.1- hexene Terpolymers", J. Polym. Sci. Polym. Chem., 42, 2474 (2004). https://doi.org/10.1002/pola.20097
  3. G. B. Galland. F. F. N. Escher, L. F da Silva, M.M.D. Forte, and R. Quijada, "Ethylene-.propylene-${\alpha}$-olefin terpolymers, thermal and mechanical properties" J. Appl. Polym. Sci., 104, 3827 (2007). https://doi.org/10.1002/app.25972
  4. T. C. Chung, and H. L. Lu, "inetic and microstructure studies of poly(ethylene-co-p-methylstyrene) copolymers prepared by metallocene catalysts with constrained ligand geometry" J. Polym. Sci. Part A : Polym. Chem., 36, 1017 (1998). https://doi.org/10.1002/(SICI)1099-0518(19980430)36:6<1017::AID-POLA16>3.0.CO;2-8
  5. G. Maurizio, P. Fabrizio, F. Ofelia, C. Isabella, and D. Mara, "Ethene/Propene Copolymerization with High Product of Reactivity Ratios from a Single Center, Metallocene-Based Catalytic System", M. Ital. Macromol., 31, 3409 (1998). https://doi.org/10.1021/ma9717247
  6. K. Weiss, U. Neugebuer, S. Blau, and H. J. Lang, "Untersuchungen von Polymerisations and Metathesereaktionen, Einfach un zweifach dimethylsilylen-verbruckte Metallocendichloride des Ti, Zr und Hf in der Ethen- und Propen- Polymerisation", J. Organomet. Chem., 520, 171 (1996). https://doi.org/10.1016/S0022-328X(96)90253-3
  7. A. G. Simanke, G. B. Galland, L. Freitas, J. A. H. da Jornada, R. Quijadac, R. S. Mauler, "Influence of the comonomer content on the thermal and dynamic mechanical properties of metallocene ethylene/1-octene copolymers", Polymer., 40, 5489 (1999). https://doi.org/10.1016/S0032-3861(98)00771-X
  8. R. Guimaraes, F. C. Stedile and H.Z. dos S. Joao, "Ethylene polymerization with catalyst systems based on supported metallocenes with varying steric hindrance", J. Mol. Catal. A-Chem., 206, 353 (2003). https://doi.org/10.1016/S1381-1169(03)00411-4
  9. J. Y. Dong, H. Hong, T. C. Chung, H. C. Wang, and S. Datta, "Synthesis of Linear Polyolefin Elastomers Containing Divinylbenzene Units and Applications in Cross-Linking, Functionalization, and Graft Reactions ", Macromolecules, 36, 6000 (2003). https://doi.org/10.1021/ma021749s
  10. T. C. Chung, H. L. Lu, and R. D. Ding, "Synthesis of Polyethyleneg-polystyrene and Polyethylene-g-poly(p-methylstyrene) Graft Copolymers". Macromolecules, 30, 1272 (1997). https://doi.org/10.1021/ma9614003
  11. J. S. Oh, B. Y. Lee and T. H. Park, "Recycling of Methylaluminoxane (MAO) Cocatalyst in Ethylene Polymerization with Supported Metallocene Catalyst", Kor. J. Chem. Eng., 21, 110 (2004). https://doi.org/10.1007/BF02705387
  12. T. W. Kim, H. K. Kim, J. C. Lee, N. H. Park, U. R. Cho, D. H. Kim, "A study on the preparation of poly(ethylene-ter-high ${\alpha}$ olefin-ter-styrenic monomer) and their properties", Elast. Comp., 47, 329 (2012). https://doi.org/10.7473/EC.2012.47.4.329