Influences of Pretreatment Procedures, and Refractive and Absorptive Indices in Grain Size Analysis of Sandy Samples by Laser Diffraction Grain Size Analyzer

레이저 회절 입도분석기를 이용한 사질 시료의 입도분석에 있어서 전처리 및 굴절율과 흡수율의 영향

  • Yoon, Soon-Ock (Department of Geography and Research Institute for Basic Sciences, Kyung Hee University) ;
  • Hwang, Sangill (Department of Geography, Kyungpook National University) ;
  • Park, Chung-Sun (Department of Geography, Kyung Hee University)
  • 윤순옥 (경희대학교 지리학과 및 기초과학연구소) ;
  • 황상일 (경북대학교 지리학과) ;
  • 박충선 (경희대학교 지리학과)
  • Received : 2013.11.27
  • Accepted : 2013.12.21
  • Published : 2013.12.31

Abstract

This study aims to compare the inf luences of pretreatment procedures, and refractive and absorptive indices in grain size analysis of sandy samples collected from Sagot Beach, Baengnyeong Island by laser diffraction grain size analyzer, and propose the proper procedure and method in grain size analysis of sandy samples. The analyzed samples do not indicate large differences by the three pretreatment procedures applied in this study. However, the organic matters should be removed by hydrogen peroxide, because the samples without hydrogen peroxide pretreatments show differences from the samples with hydrogen peroxide pretreatments. The results with a refractive index of 1.3 and absorptive index less than 0.01 also indicate differences from those with other indices. Compared to the differences in fine samples, these differences are not significant and thus, it can be concluded that the results in grain size analysis of sandy samples are not greatly influenced by the refractive and absorptive indices. However, other indices out of the ranges should be applied.

본 연구는 백령도 사곶 사빈에서 채취한 사질 시료를 대상으로 레이저 회절 입도분석기를 이용한 입도분석에 있어서 전처리 및 굴절율과 흡수율의 영향을 비교하고, 사질 시료의 적절한 입도분석 절차 및 방법을 제시하고자 한다. 본 연구에 적용된 세 가지 전처리 방법에 따라 입도분석 결과는 서로 큰 차이를 보이지 않지만, 과산화수소 처리를 했을 경우, 그렇지 않았을 때와 차이를 보이고 있어, 과산화수소 처리를 통해 유기물은 제거되어야 한다. 시료의 입도분석 결과는 굴절율 1.3과 흡수율 0.01 이하에서 다른 지수가 적용되었을 때와 차이를 보이고 있다. 이러한 차이는 세립질 시료에 비하면 그리 크지 않으며 따라서 굴절율과 흡수율도 사질 시료의 입도분석 결과에 큰 영향을 미치지 않는다. 그러나 굴절율 1.3과 흡수율 0.01 이하 이외의 다른 지수를 적용할 필요가 있다.

Keywords