KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Experimental Test on Coner Rigid Joint Connection Method for Underground Roadway Structure

지하차도 구조물의 우각부 연결장치에 대한 실험적 평가

  • Received : 2012.01.11
  • Accepted : 2012.11.06
  • Published : 2013.02.04
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, a safe, economic, and rapid construction method of underground roadway using PSC girder is developed to reduce traffic congestion and maximize space usage in urban area. For an efficient application of the method, a rigid joint connection is proposed and tested. For the testing, cantilever specimens were used to verify its capacity. The parameters for this study were cross beam length and joint connection type. The results of the test showed that the proposed connection system has superior performances. Despite having differences of cross beam length and joint connection type, the stable flexural behavior was shown in all of the tested specimens. Also, the behaviors of PSC girders and upper slabs connected by the proposed method showed superior performance. Moreover, the improvement of structure performance according to the increase of length of cross beams has been verified.

본 연구에서는 지상공간이 부족한 대도시 밀집지역과 교통혼잡이 심각한 도심부의 교통문제를 해결하기 위해 안전성과 경제성이 확보되면서도 급속시공이 가능한 PSC 거더를 적용한 지하차도 급속시공 공법을 개발하였다. 그리고 이를 안정적으로 적용하기 위해 개발된 연결부 고정장치의 성능을 확인하기 위한 연구의 일환으로 캔틸레버 형식의 구조실험체를 통하여 성능 검증을 실시하였다. 본 실험은 고정연결장치의 방식과 가로보의 길이를 변수로 설정하였다. 실험결과, 개발된 고정연결장치는 형상과 연결방식에 상관없이 모두 안정적인 휨 거동을 나타내었다. 또한, 실험체는 파괴시까지 고정연결장치에 의해 연결된 PSC 거더와 상부 슬래브가 일체 거동을 하는 것으로 나타나 고정연결장치의 성능이 매우 우수한 것으로 확인되었다. 가로보의 길이에 따른 영향은 가로보의 길이가 길어짐에 따라 구조물의 성능이 향상되는 것을 확인할 수 있었다.

Keywords

References

  1. Afifuddin, M., Machida, A., Sugiyama, T. and Sato, T. (1998) Study on Behavior of Connection Mechanism on Hybrid-Rigid Frame Bridge Structure, Journal of Structural Engineering, JSCE, Vol. 44A, pp. 1423-1434.
  2. Alva, G.M.S., Ferreira, M.A. and El Debs, A.L.H.C. (2009) Partially Restrained Connections in Reinforced Concrete Structures, IBRACON Structures and Materials Journal, Vol. 2, No. 4, pp. 356-379.
  3. Feng, F., Dennis, L. and Jianqiao, Y. (2010) Moment resistance and rotation capacity of semi-rigid composite connections with precast hollowcore slabs, Journal of Constructional Steel Research, Vol. 66, No. 3, pp. 452-461. https://doi.org/10.1016/j.jcsr.2009.10.016
  4. Han, S.J. and Han, S.H. (2010) Feasibility of underground highway project, The Magazine of the Korean Society of Civil Engineers, KSCE, Vol. 58, No. 2, pp. 27-34.
  5. Hayalioglu, M.S. and Degertekin, S.O. (2005) Minimum Cost Design of Steel Frames with Semi-rigid Connections and Column Bases Via Genetic Optimization, Computers & Structures, Vol. 83, No. 21-22, pp. 1849-1863. https://doi.org/10.1016/j.compstruc.2005.02.009
  6. Kyung, K.S., Lee, H.H., Jeon, J.C. and Cho, K.H. (2003) A study on structural behavior at rigid connection of rahmen-type hybrid bridge, Journal of The Korean Society of Civil Engineers, KSCE, Vol. 23, No. 4A, pp. 687-694.
  7. Lee, H.S. (2011) Analytical evaluation of corner joint behavior in precast psc underground structures, ME thesis, Yonsei University, Seoul, 70pp.
  8. Park, S.K. and Kim, M.H. (2010) Seismic performance of precast beam-column joints with thru-connectors, Journal of the Korea Concrete Institute, KCI, Vol. 22, No. 4, pp. 441-450. https://doi.org/10.4334/JKCI.2010.22.4.441
  9. Park, S.K. and Yeo, I.S. (2007) Experimental test for seismic performance of PCS structural system, Journal of the Korea Concrete Institute, KCI, Vol. 19, No. 3, pp. 313-322. https://doi.org/10.4334/JKCI.2007.19.3.313
  10. Sasaki, Y., Hirai, T. and Akehashi. K. (1998) Experimental study on rigid connection for hybrid frame bridge consisting of steel girder and reinforced concrete pier, Journal of Structural Engineering, JSCE, Vol. 44A, pp. 1447-1457.
  11. Sato, T., Shimizu, I., Ota, T. and Machida, A. (1999) A proposal on design method for rigid section of hybrid rigid-frame bridge, Journal of Structural Engineering, JSCE, Vol. 45A, pp. 1431-1438.
  12. Seung, J.M. (2007) A study on the design of steel-concrete composite frame integral bridges, ME thesis, University of Seoul, Seoul, 64pp.
  13. Song, H.S. and Yu, S.Y. (2006a) Analysis on the behaviors of precast concrete beam-column connections subject to cyclic loading, Journal of the Korea Concrete Institute, KCI, Vol. 18, No. 4, pp. 497-506. https://doi.org/10.4334/JKCI.2006.18.4.497
  14. Song, H.S. and Yu, S.Y. (2006b) Evaluation on the behaviors of precast concrete beam-column connections for apartments, Journal of the Korea Concrete Institute, KCI, Vol. 18, No. 5, pp. 657-666. https://doi.org/10.4334/JKCI.2006.18.5.657
  15. Suzuki, Y., Mizuguchi, K., Yoshida, M., Nakashima, H. and Tachi, K. (1998) A rigid connection mechanism of composite frame bridge and its model loading test, Journal of Structural Engineering, JSCE, Vol. 44A, pp. 1435-1446.
  16. Woo, K.H., Lee, D.K., Lee, S.M., Lee, J.S. and Lee, C.H. (2009) A construction case of cut-and-cover tunnel with precast arch bridge (PAB) system, Journal of the Korea Concrete Institute, KCI, Vol. 21, No. 3, pp. 81-86.