KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Study on Numerical Analysis of Estimating Elastic Modulus in Rockmass with a Consideration of Rock and Joint Characteristcs

암석 및 절리특성을 고려한 암반의 탄성계수 추정에 관한 수치해석적 연구

  • Son, Moorak (Department of Civil Engineering at Daegu University) ;
  • Lee, Wonki (Department of Civil Engineering at Daegu University)
  • 손무락 (대구대학교 토목공학과) ;
  • 이원기 (대구대학교 토목공학과)
  • Received : 2012.10.05
  • Accepted : 2012.11.23
  • Published : 2013.02.04
Download PDF
⟨ Previous Next ⟩

Abstract

Elastic modulus in rockmass is an important factor to represent the characteristic of rock deformation and is frequently used to estimate the displacement induced due to tunnel excavation or other activities in rockmass. Nevertheless, the study to estimate the elastic modulus, which considers the rock type and joint characteristics (joint shear strength and joint inclination angle), has been done in less frequency. Accordingly, this study is aimed at estimating of elastic modulus in jointed rockmass. For this purpose, numerical parametric studies have been carried out with a consideration of rock and joint conditions. Tunnel displacement results have been used to estimate the elastic modulus of jointed rockmass using the elastic theory of circular tunnel. From this study, the results would be expected to have a great practical use for estimating the displacement induced due to tunnel excavation or other activities in jointed rockmass.

암반에서의 탄성계수는 암반의 변형특성을 나타내는 매우 중요한 인자로서 암반에서의 터널굴착 또는 다른 활동 등으로 인해 발생되는 변위를 파악하는데 자주 이용된다. 그럼에도 불구하고 현재까지는 암석종류 및 절리특성을 반영하여 탄성계수를 산정하는 연구는 미흡한 것으로 판단된다. 따라서, 본 연구는 다양한 암석 및 절리상태에서 암반의 탄성계수를 추정하고자 한다. 이를 위해서 암석상태 및 절리특성을 고려한 수치해석 매개변수 연구를 수행하고, 조사된 변위결과를 통해 암반에서의 원형터널에 대한 탄성이론을 역이용하여 암석종류 및 절리특성이 반영된 탄성계수를 추정하는데 사용될 것이다. 본 연구를 통해 얻어진 결과는 절리가 형성된 암반에서 터널굴착 또는 다른 활동 등으로 인해 발생되는 변위를 파악함에 있어서 그 활용도가 매우 클 것으로 기대된다.

Keywords

References

  1. Son, M, Lee, S, and Lee, W (2011), "Estimation of Elastic Modulus in Rock Mass for Assessing Displacment in Rock Tunnel" Journal of Korean Society of Civil Engineers, KSCE, Vol. 31(2C), pp. 83-92.
  2. Barton, N.R. (1976). The shear strength of rock and rock joints, Int. J. Mech. Min. Sci. & Geomech. Abstr. Vol. 13(10), pp. 1-24. https://doi.org/10.1016/0148-9062(76)90221-7
  3. Bieniawski, Z.T. (1976), Rock mass classification in rock engineering, John Wiley& Sons, NY.
  4. Bieniawski, Z.T. (1978), Determining rock mass deformability: experience from case histories. Int. J. Rock Mechanics Miner. Sci. and Geomechanics Abstr., Vol. 15(5), pp. 237-247. https://doi.org/10.1016/0148-9062(78)90956-7
  5. Bienniawski, Z.T. (1989), Engineering Rock Mass Classification, John Wiley & Sons, NY.
  6. Clerici, A. (1993), Indirect determination of the modulus of deformation of rock masses-case histories. Proc. Symp. EUROCK, Rotterdam, A.A.Balkema, eds. L. M. Riberio e Sousa, and N. F. Grossman, pp. 509-517.
  7. Coulson, J.H. (1970), The Effects of Surface Roughness on the Shear Strength of Joints in Rock, Ph.D Dissertation, Univ. of Illinois at Urbana-Champaign.
  8. Goodman, R.E. (1989), Introduction to rock mechanics. John Wiley & Sons, New York.
  9. Grimstad, E. and Barton, N. (1993), Updating the Q-system for NMT. Proc. Int. Symp. on Sprayed Concrete, Fagernes, Norwegian Concrete Association, Norway, pp. 44-66.
  10. Hoek, E. and Brown, E.T. (1998), Practical estimates of rock mass strength. Int. J. Rock Mech. Min. Sci. Vol. 34(8), pp. 1165-1186.
  11. Kirsch, G (1898), Die theorie der elastizitat und die bedurfnisse der festigkeitslehre, Veit. Ver. Deut. Ing., Vol. 42(28), pp 797-807.
  12. Palmstrom A. (1996), Characterizing rock masses by the RMi for use in practical rock engineering, Part 1: the development of the rock mass index (RMi), Tunneling and Underground Space Technology, Vol. 11(2), pp. 175-186. https://doi.org/10.1016/0886-7798(96)00015-6
  13. Palmstrom, A and Singh, R. (2001), The deformation modulus of rock masses-comparisons between in situ tests and indirect estimates, Tunnelling and Underground Space Technology, Vol. 16, pp. 115-131. https://doi.org/10.1016/S0886-7798(01)00038-4
  14. Serafim, J.L. and Pereira, J.P. (1983), Considerations on the Geomechanical Classification of Bieniawski, Proc. Symp. on Engineering Geology and Underground Openings, Lisboa, pp. 1133-1144.
  15. UDEC User's Manual. (2004), ITASCA Consulting Group, Minnesota, U.S.A 2004.

Cited by

  1. Estimation of Elastic Modulus of Jointed Rock Mass under Tunnel Excavation Loading vol.30, pp.7, 2014, https://doi.org/10.7843/kgs.2014.30.7.17