한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제12권6호
  • /
  • Pages.175-181
  • /
  • 2013
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

5축 FMS라인의 절삭 칩 처리를 위한 칩 회수처리장치 시뮬레이션에 관한 연구

A Study on Simulation of Chip Recycling System for the Management of Cutting Chip in 5-Axis FMS Line

  • Lee, In-Su (School of Automotive Engineering, Gyeongnam National University of Science and Technology) ;
  • Kim, Hae-Ji (Dept. of Automotive Engineering, Gyeongnam National University of Science and Technology) ;
  • Kim, Deok-Hyun (School of Industrial Systems Engineering, Gyeongsang National University) ;
  • Kim, Nam-Kyung (Dept. of Automotive Engineering, Gyeongnam National University of Science and Technology)
  • 투고 : 2013.10.08
  • 심사 : 2013.12.20
  • 발행 : 2013.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The primary element of machining automation is to maximize the utilization of machine tools, which determines the output and lead-time. In particular, 95% of raw materials for wing ribs are cut into chips and 0.6 ton of chips are generated every hour from each machine tool. In order to verify the chip recycling system that controls the chips from the machines in five-axis FMS line, a simulation of the virtual model is constructed using the QUEST simulation program. The optimum speed of the chip conveyor and its operating conditions that directly affect the efficiency of the FMS line are presented including the chip conveyor speed, the maximum capacity of the hopper, and the number of chip compressors.

키워드

참고문헌

  1. Schuh, G., Rozenfeld, H., Assmus, D. and Zancul, E., Process Qriented Framework to Support PLM Implementation, Computers in Industry, 59(2-3), pp. 210-218, 2008. https://doi.org/10.1016/j.compind.2007.06.015
  2. Freedman, S., "An Overview of Fully Integrated Digital Manufacturing Technology", Winter Simulation Conference Proceedings, 1, pp. 281-285, 1999.
  3. S. D. Noh, Y. J. Park, "Material Planning Information Management for Automotive General Assembly Using Digital Factory", Transactions of th Society of CAD/CAM Engineers, Vol. 9, No. 4, pp, 325-333, 2004.
  4. Y. S. Kim, J. S. Yang, S.H. Han, "Design and Implementation of Multichannel Visualization Module on PC Cluster for Virtual Manufacturing", Journal of Mechanical Science and Technology, Vol. 30, No. 3, pp. 231-240, 2006. https://doi.org/10.3795/KSME-A.2006.30.3.231
  5. D. H. Moon, J. S. Lee, S.G. Baek, B. L. Zhang, Y. G. Kim, "Developing Automatic Lens Module Assembly System Using 3D Simulation", Journal of the Korea Society for Simulation, Vol. 16, No. 2, pp. 65-74, 2007.
  6. S. S. Song, "Structured DEVS Formalism: A Structural Modelling Method of Discrete Event Systems", Journal of the Korea Society for Simulation, Vol. 21, No. 2, pp. 19-30, 2012. https://doi.org/10.9709/JKSS.2012.21.2.019
  7. M. S. Ko, S. C. Park, "A Study of PLC Simulation for Transport System in Virtual Environment", Transactions of the Society of CAD/CAM Engineering, Vol. 17, No. 4, pp. 274-281, 2012. https://doi.org/10.7315/CADCAM.2012.274
  8. Ph. Lequed, K. P. Smith, A. Danielou., "Aluminum-Copper-Lithium Alloy 2050 Developed for Medium to Thick Plate," Journal of Materials Engineering and Performance, Vol. 19, No. 6, pp. 841-847, 2010. https://doi.org/10.1007/s11665-009-9554-z

피인용 문헌

  1. An Experimental Study on the Deburring Characteristics according to rpm Change of Deburring Wheel vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.103
  2. 칩 처리가 포함된 절삭유/폐유 분리 및 냉각 시스템 개발 vol.16, pp.3, 2013, https://doi.org/10.14775/ksmpe.2017.16.3.016
  3. A Basic Study on Structural Analysis and Improvement of Pressurized DC (Dust Cake) Filter System Using Hydraulic Cylinder vol.36, pp.2, 2013, https://doi.org/10.7736/kspe.2019.36.2.135
  4. 네오디뮴 영구자석을 이용한 미세칩 제거장치의 개발 vol.20, pp.3, 2013, https://doi.org/10.14775/ksmpe.2021.20.03.122