Journal of Power System Engineering (동력기계공학회지)

The Korean Society for Power System Engineering (한국동력기계공학회)
권호 표지
DOI QR코드

DOI QR Code

Structural Analysis of 800Ton Hot Stamping Press

800톤 핫스탬핑 프레스의 구조해석

  • Choi, Byeong-Keun (Department of Energy and Mechnical Engineering, Gyeongsang National University) ;
  • Lee, Jeong-Hoon (Department of Energy and Mechnical Engineering, Gyeongsang National University) ;
  • Lee, Jong-Myeong (Department of Energy and Mechnical Engineering, Gyeongsang National University) ;
  • Ha, Jeong-Min (Department of Energy and Mechnical Engineering, Gyeongsang National University) ;
  • Gu, Dong-Sik (Division of Shipbuilding Production, Changwon Moonsung University) ;
  • Kim, Won-Chul (Department of Mechanical System Engineering, Gyeongsang National University)
  • 최병근 (경상대학교 에너지기계공학과) ;
  • 이정훈 (경상대학교 대학원 에너지기계공학과) ;
  • 이종명 (경상대학교 대학원 에너지기계공학과) ;
  • 하정민 (경상대학교 대학원 에너지기계공학과) ;
  • 구동식 (창원문성대학 조선학부) ;
  • 김원철 (국립경상대학교 기계시스템공학과)
  • Received : 2012.11.23
  • Accepted : 2012.12.27
  • Published : 2013.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

Press machine has advantages over other manufacturing machine which can produce large quantities of products in short time so it is widely used in lots of industrial sectors. To obtain the vehicle's weight lightening and rigidity of the body-frame by applying 'Hot stamping' technique is increasing in the automotive field. In this paper, to improve the irregular vibration arose by 800Ton hot stamping press, the research was continued. Bed, slide and main frame are the key part of working precision, so perform structural analysis was conducted, and based on the analyzing results, structural changes were done on the parts where structural deformation occurred.

Keywords

References

  1. H. K. Park and B. B. Hwang, 1997, "A Structural Analysis of C-Frame Press", Spring journal of The Korean Society For Technology Of Plasticity, pp. 257-260.
  2. M. J. Jeon, 2012, Hyundai-Hysco, "Hot Stamping expansion", KMJ News.
  3. J. H. Bang and J. H. Yu, 2009, "Hyundai-Hysco, Hot stamping method introduced in the automotive steel", KMJ News.
  4. J. S. Jeong, 2007, "Stress Analysis of H-Frame Mechanical Link-Motion Press", In-ha University Master's Thesis, In-cheon, pp. 11-14,
  5. D. H. Moon, M. S. Choi and Y. B. Kim, 1998, "Longitudinal and Flexural Vibration Analysis of a Beam Type Structure by Transfer Stiffness Coefficient Method", Journal of The Korea Society for Power System Engineering, Vol. 2, No. 1, pp. 59-66.
  6. M. J. Lee, D. S. Han and G. J. Han, 2008, "Evaluation of Structural Stability of JIB Crane for a Feed Vessel According to the Luffing Angle", Journal of The Korea Society for Power System Engineering, Vol. 12, No. 6, pp. 24-28.

Cited by

  1. A study on design optimization of a multistage bollard by Taguchi method vol.19, pp.5, 2015, https://doi.org/10.9726/kspse.2015.19.5.025