Journal of Electrical Engineering and Technology

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

The Optimal Design of Single Sided PMLSM for Considering Winding Temperature Rising according to Thickness of Teeth

  • An, Ho-Jin (Dept. of Electrical and Electronic Engineering, Changwon National University) ;
  • Cho, Gyu-Won (Dept. of Electrical and Electronic Engineering, Changwon National University) ;
  • Woo, Seok-Hyeon (Dept. of Electrical and Electronic Engineering, Changwon National University) ;
  • Kim, Gyu-Tak (Dept. of Electrical and Electronic Engineering, Changwon National University)
  • Received : 2011.12.19
  • Accepted : 2012.10.12
  • Published : 2013.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

This research deals with design of the maximum thrust density with considering winding temperature rise of single-sided PMLSM. The temperature rise of winding which caused to machine characteristics such as copper loss, iron loss and efficiency was analyzed by FEM. The maximum allowable current density was calculated within the allowable temperature. The effects of loss and efficiency according to temperature characteristic were confirmed.

Keywords

References

  1. Karita, Mitsuji, "Present Status of Linear Drives for Industry Applications in japan," Proc. of LDIA01, pp. 462-467, October 2001.
  2. M. Sanada, S. Morimoto, Y. Takeda, 1997. "Interior Permanent Magnet Linear Synchronous Motor for High Performance Drives", IEEE Trans. on Industry Application, Vol. 33, No. 4, pp. 966-972. https://doi.org/10.1109/28.605738
  3. S.R. Aid, W.N.L. Mahadi, K.M.Nor "Thermal Analysis of a Tubular Permanent Magnet Linear Generator using Multiphysics Solver" Proc. IEEE Region 10 TENCON 2005 Conf., CD-ROM, 6pp.
  4. Gieras j.F, Godkin, Mikhaill, "Status of Permanent Magnet Linear Motors in the United States," Proc. of LDIA01, pp. 456-461, October 2001.
  5. K. Yoshida, J. Lee, Y. J. Kim, 1997. "3-D FEM Field Analysis in Controlled PMLSM for Maglev Vehicle", IEEE Trans. on Magnetics, Vol. 33, No. 2, pp. 2207- 2210. https://doi.org/10.1109/20.582771
  6. D. Ebihara, H. J. Kim, Y. Kawamotor, S. Torii, M. Watada, 1993, "Study of the Transport System with PM Type LSM", Annual Conference of IEEE Industry Applications Society, pp. 53-56.
  7. International Standard "IEC 60034-1 : 2008", Rotating Electrical Machines, Rating and Performance.
  8. Marignetti, Fabrizio, Delli Colli, Vincenzo "Thermal Analysis of an Axial Flux Permanent-Magnet Synchronous Machine", IEEE Trans. On Magnetics, Vol. 45, issue 7, pp. 2970-2975, July 2009 https://doi.org/10.1109/TMAG.2009.2016415
  9. P. Mellor, D. Roberts, D. Turner "Lumped parameter thermal model for electrical machines of TEFC design", Proc. Inst. Elect.

Cited by

  1. Characteristics Analysis and Design of a Novel Magnetic Contactor for a 220 V/85 A vol.49, pp.11, 2013, https://doi.org/10.1109/TMAG.2013.2268054