DOI QR코드

DOI QR Code

Methacrylic Acid가 도입된 Styrene-Butadiene Rubber를 기반으로 한 Ionic Elastomer 합성

Synthesis of Ionic Elastomer Based on Styrene-Butadiene Rubber Containing Methacrylic Acid

  • Kim, Ki-Hyun (Department of Chemical and Biomolecular Engineering, Pusan National University) ;
  • Lee, Jong-Yeop (R&BD Center, Kumho Petrochemical) ;
  • Choi, Joon-Myeong (Department of Polymer and Science Engineering, Pusan National University) ;
  • Kim, Hee-Jung (Department of Polymer and Science Engineering, Pusan National University) ;
  • Seo, Byeongho (Department of Chemical and Biomolecular Engineering, Pusan National University) ;
  • Kim, Bong-Soo (Department of Polymer and Science Engineering, Pusan National University) ;
  • Kwag, Gwang-Hoon (R&BD Center, Kumho Petrochemical) ;
  • Paik, Hyun-Jong (Department of Polymer and Science Engineering, Pusan National University) ;
  • Kim, Wonho (Department of Chemical and Biomolecular Engineering, Pusan National University)
  • 투고 : 2012.12.17
  • 심사 : 2012.12.28
  • 발행 : 2013.03.31

초록

본 연구에서는 저온유화중합을 통해 벤질메타아크릴레이트 (benzyl methacrylate, BzMA) 를 third monomer 로 사용하여 styrene-butadiene-benzyl methacrylate copolymer (BzMA-SBR) 를 합성하였다. 수산화나트륨 (NaOH) 을 이용하여 가수분해반응을 통해 BzMA 의 벤질 그룹을 deprotection 시켜 carboxylated styrene butadiene rubber (XSBR) 로 만든 후, Na-XSBR 아이오노머를 제조하였다. 중합 시 BzMA 의 투입량을 달리하여 XSBR의 카르복실기 (carboxyl group) 함량을 다양하게 조절하였다. FTIR (ATR), $^1H$ NMR, DSC 를 이용하여 합성된 BzMA-SBR, Na-XSBR 아이오노머의 구조와 특성을 분석하였다.

A new terpolymer, styrene-butadiene-benzyl methacrylate copolymer (BzMA-SBR) was synthesized by emulsion polymerization. After polymerization, XSBR ionomer was prepared by deprotection of benzyl group of BzMA through hydrolysis with NaOH. Carboxyl group contents can be controlled by changing the initial feed contents of BzMA. Structure of BzMA-SBR and XSBR were characterized by FTIR, $^1H$ NMR and DSC.

키워드

참고문헌

  1. R. A. Weiss, J. J. Fitzgerald, and D. Kim, "Viscoelastic Behavior of Lightly Sulfonated Polystyrene Ionomers", Macromolecules, 24, 1071 (1991). https://doi.org/10.1021/ma00005a015
  2. W. J. Macknight and R. D. Lundberg, "Elastomeric Ionomers". Rubber Chem. Technol., 57, 652 (1984). https://doi.org/10.5254/1.3536023
  3. A. Eisenberg and J. S. Kim, "Introduction to Ionomers", p. 327, Wiley, New York (1998).
  4. H. P. Brown, "Carboxylic Elastomers", Rubber Chem. Technol., 30, 1347 (1957). https://doi.org/10.5254/1.3542762
  5. L. Ibarra, M. Alzorriz, "Ionic Elastomers Based on Carboxylated Nitrile Rubber(XNBR) and Zinc Peroxide: Influence of Carboxylic Group Content on Properties", J. Appl. Polym. Sci., 84, 605 (2002). https://doi.org/10.1002/app.10313
  6. U. K. Mandal, "Ionic elastomer based on carboxylated nitrile rubber: infrared spectral analysis", Polym. Int., 49, 1653 (2000). https://doi.org/10.1002/1097-0126(200012)49:12<1653::AID-PI586>3.0.CO;2-U
  7. A. Eisenberg, "Clustering of Ions in Organic Polymers. A Theoretical Approach", Macromolecules, 3, 147 (1970). https://doi.org/10.1021/ma60014a006
  8. D. C. Edwards and K. Sato, "Nitrile Rubber Functionalized for Silica Reinforcement", Rubber Chem. Technol., 52, 84 (1979). https://doi.org/10.5254/1.3535210
  9. D. C. Edwards and K. Sato, "Interaction of Silica with Functionalized SBR", Rubber Chem. Technol., 53, 66 (1980). https://doi.org/10.5254/1.3535033
  10. H. P. Brown, "Crosslinkin Reactions of Carboxylic Elastomers", Rubber Chem. Technol., 36, 931 (1963). https://doi.org/10.5254/1.3539642
  11. K. Sato, "Ionic Crosslinking of Carboxylated SBR", Rubber Chem. Technol., 56, 942 (1983). https://doi.org/10.5254/1.3538174
  12. X. Y. Yuan, V. L. Dimonie, E. D.Sudol, J. E. Roberts, and M. S. El-Aasser, "Toward an Understanding of the Role of Water-Soluble Oligomers in the Emulsion Polymerization of Styrene-Butadiene-Acrylic Acid. Mechanism of Water-Soluble Oligomer Formation", Macromolecules, 35, 8356 (2002). https://doi.org/10.1021/ma020017x
  13. P. A. Lovell and M. S. El-Aasser, "Emulsion Polymerization and Emulsion Polymers", p. 620, John Wiley and Sons (1997).
  14. Y. S. Park, S. G. Choi, "The Influence of Thickener Content on the Properties of Acryl Emulsion Resin", J. Korean Ind. Eng. Chem., 12, 186 (2001).
  15. E. S. Rufino, E. E. C. Monteiro, "Infrared study on methyl methacrylate-methacrylic acid copolymers and their sodium salts", Polymer, 44, 7189 (2003). https://doi.org/10.1016/j.polymer.2003.08.041
  16. A. Eisenberg, B. Hird and R. B. Moore, "A New Multiplet-Cluster Model for the morphology of Random Ionomers", Macromolecules, 23, 4098 (1990). https://doi.org/10.1021/ma00220a012