대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제37권4호
  • /
  • Pages.529-535
  • /
  • 2013
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

새로운 박판샌드위치 판재의 삼점굽힘거동

Mechanical Behavior of New Thin Sandwich Panel Subjected to Bending

  • 이정인 (전남대학교 기계공학부) ;
  • 강기주 (전남대학교 기계공학부)
  • Lee, Jung-In (School of Mechanical Engineering, Chonnam Nat'l Univ.) ;
  • Kang, Ki-Ju (School of Mechanical Engineering, Chonnam Nat'l Univ.)
  • 투고 : 2012.09.28
  • 심사 : 2012.12.10
  • 발행 : 2013.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

알루미늄 확장 금속망 심재와 스테인리스강 면재를 에폭시 수지로 접합하여 제조되는 새로운 박판샌드위치 판재의 제조방법을 제시하고 이의 굽힘 거동을 조사하였다. 강도 및 강성도에 대한 이론해를 제시하고 실험을 통하여 프레스 성형성과 굽힘강도 증대효과 등을 평가하였다. 제시된 제조방법과 재료조합에서 삼점굽힘 하중 작용 시 면재-심재 접착부 분리 현상보다 면재의 항복이 훨씬 조기에 발생하여 본 샌드위치 판재의 우수성을 확인하였다. 샌드위치 판재의 강성도 및 면재 항복이 발생하는 하중과 접착부 분리 하중 등에 대하여 유도된 이론식이 실험 결과와 비교적 잘 일치하였다. 동일한 무게를 갖는 균질 판재와 비교하여 강도와 강성도면에서 월등하고 프레스 성형성도 우수할 것으로 평가되었다.

A new thin sandwich panel composed of an aluminum expanded metal core adhesively jointed with stainless steel face sheets is introduced, and its mechanical behavior under three-point bending is investigated. The strength and stiffness are analyzed theoretically, and the press-formability and strength enhancement are evaluated experimentally. The specimens with the specific configurations exhibit face yielding well before face-core separation, which means that the sandwich panel can be formed by a press without failure. The measured load levels corresponding to the face yielding and the face-core separation agree fairly well with the theoretical estimations. For a given weight, the sandwich panel is superior to a solid panel in terms of strength, stiffness, and press-formability.

키워드

참고문헌

  1. Clyne, T.W. and Markaki, A.E., 2004, "Ultra Light Stainless Steel Sheet Material," US Patent 6764772, 20 July.
  2. Markaki, A.E., Westgate, S.A. and Clyne, T.W., 2002, in: Ghosh, T.S., Sanders, T.D., Clark, A.K. (Eds.), Proceedings of 3rd Global Symposium on Materials Processing and Manufacturing, TMS Meeting, Seattle, WA, p. 15.
  3. Markaki, A.E. and Clyne, T.W., 2003, "Mechanics of Thin Ultra-Light Stainless Steel Sandwich Sheet Material: Part I. Stiffness," Acta Materialia, Vol. 51, pp.1341-1350. https://doi.org/10.1016/S1359-6454(02)00528-1
  4. Markaki, A.E. and Clyne, T.W., 2003, "Mechanics of Thin Ultra-Light Stainless Steel Sandwich Sheet Material: Part II. Resistance to Delamination," Acta Materialia, Vol. 51, pp.1341-1357. https://doi.org/10.1016/S1359-6454(02)00528-1
  5. Lesourd, H., 1988, "Sandwich-Type Stampable, Metallic Structure, US Patent 4759994, 26 July.
  6. http://www.isf.rwth-aachen.de/index.php?id=39&L=1
  7. El-Magd, E., Gebhard, J. and Stuhrmann, J., 2007, "Simulation of the Creep Behaviour of P92 Sandwich structures at $650^{\circ}C$ with Loading Transverse to the Intermediate Layer," Computational Materials Science, Vol. 39, pp.446-452. https://doi.org/10.1016/j.commatsci.2006.07.011
  8. Ashby, M.F., Evans, A.G., Fleck, N.A., Gibson, L.J., Hutchison, J.W. and Wadley, H.N.G., 2000, Metal Foams: a Design Guide. Butterworth Heinemann, Boston.
  9. Wicks, N. and Hutchinson, J.W., 2001, "Optimal Truss Plates," International Journal of Solids and Structures, Vol. 38, pp.5165-5183. https://doi.org/10.1016/S0020-7683(00)00315-2
  10. Lardner, T.J. and Archer, R.R., 1994, Mechanics of Solids: An Introduction, McGraw-Hill, New York, p. 334.
  11. Crandal, S.H., Dahl, N.C. and Lardner, T.J., 1972, An Introduction to the Mechanics of Solids, 2nd Ed., McGraw-Hill, Tokyo, p. 452.