KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Stability and P-Δ Analysis of Generalized Frames with Movable Semi-Rigid Joints

일반화된 부분강절을 갖는 뼈대구조물의 안정성 및 P-Δ 해석

  • 민병철 (인덕대학교 토목환경설계과)
  • Received : 2012.09.24
  • Accepted : 2013.01.31
  • Published : 2013.03.30
Download PDF
⟨ Previous Next ⟩

Abstract

For stability design and P-${\Delta}$ analysis of steel frames with semi-rigid connections, the explicit form of the exact tangential stiffness matrix of a generalized semi-rigid frame element having rotational and translational connections is firstly derived using the stability functions. And its elastic and geometric stiffness matrix is consistently obtained by Taylor series expansion. Next depending on connection types of semi-rigidity, the corresponding tangential stiffness matrices are degenerated based on penalty method and static condensation technique. And then numerical procedures for determination of effective buckling lengths of generalized semi-rigid frames members and P-${\Delta}$ and shortly addressed. Finally three numerical examples are presented to demonstrate the validity and accuracy of the proposed method. Particularly the minimum braced frames and coupled buckling modes of the corresponding frames are investigated.

부재간의 연결조건에 따른 다양하고 복잡한 강구조물의 P-${\Delta}$ 해석 및 좌굴 거동특성을 파악하기 위하여, 본 연구에서는 부재의 연결이 회전 및 이동스프링으로 구성된 부분강절(semi-rigid) 뼈대요소의 일반화된 접선강도 행렬을 유도하였고 이로부터 다시 Taylor 전개를 적용하여 탄성강도 행렬과 기하학적 강도행렬을 일반화된 형태로 제시하였다. 이를 위하여, 보-기둥부재의 좌굴조건을 만족시키는 처짐함수로부터 안정함수(stability function)를 유도하였고, 횡변위(sway)를 고려한 힘-변위관계와 적합조건을 고려하여 엄밀한 부분강절 뼈대요소의 접선강도행렬을 제시하였다. 다양한 수치해석 예제에 대해 타 연구자의 해석 결과 및 본 연구의 선형 및 비선형 해석이론을 통한 좌굴해석 결과를 비교하여 본 연구의 타당성과 부분강절 뼈대구조물의 좌굴거동 특성을 제시하였다.

Keywords

References

  1. Aristizabal-Ochoa, J.D. (2004). "Column stability and minimum lateral bracing : effects of shear deformations" Journal of Engineering Mechanics, ASCE, Vol. 130, pp. 1223-1232. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:10(1223)
  2. Banerjee JR, Williams FW. (1994). "The effect of shear deformation on the critical bukling of columns" J. Sound and Vibration, 174(5), pp145-168. https://doi.org/10.1006/jsvi.1994.1268
  3. Bathe, K. (1993). Finite element methods, Prentice-Hall, Englewood Cliffs, New Jersey, pp.110-113.
  4. Bridge RQ, Fraser DJ. (1987). "Improved G-factor method for evaluating effective lengths of Columns" J. Struct. Eng. ASCE, vol. 113, pp1341-1356. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:6(1341)
  5. Chen WF, Lui EM. (1987). Structural Stability, Elsvier Science Publishing Co., New York.
  6. Chen WF, Lui EM. (1991). Stability Design of Steel Frames, CRC Press, Inc., New York.
  7. Essa H.S. (1997). "Stability of columns in unbraced frames" J. Struct., Eng, ASCE, 123:952-957 https://doi.org/10.1061/(ASCE)0733-9445(1997)123:7(952)
  8. Eurocode 3. (2004). Design of steel structures Part 1.1: General rules for buildings. CEN Brussels 2004, CEN Document EN 1993-1-1.
  9. Goto Y, Suzuki S., Chen WF. (1993). "Stability behavior of semirigid sway frames" Eng. Struct., 15(3):209- 219 https://doi.org/10.1016/0141-0296(93)90055-9
  10. Kato, S., Mutoh, I., and Shomura, M. (1998). "Collapse of semi-rigid jointed reticulated domes with initial geometric imperfections" Journal of Constructional Steel Research, Vol. 48, pp. 145-213. https://doi.org/10.1016/S0143-974X(98)00199-0
  11. Kishi N., Chen WF. and Goto, Y. (1997). "Effective length factor of columns in semi-rigid and unbraced frames" Journal of Structural Engineering, ASCE, Vol. 123, No.3, March, pp. 313-320. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:3(313)
  12. Kishi N., Chen WF., Goto Y., Kimuro M. (1998). "Effective length factor of columns in flexible jointed and braced frames" J. Contr, Steel, Res, 47:93-118 https://doi.org/10.1016/S0143-974X(98)80104-1
  13. Li, Q.S. and Mativo, J. (2003). "Approximate estimation of the maximum load of semi-rigid steel frames" Journal of Constructional Steel Research, Vol. 54, pp. 213-238.
  14. LRFD (1999). Load and resistance factor design specification for structural steel buildings. Chicago : American Institute of Steel Construction Inc. USA.
  15. Mageirou, G.E., and Gantes, C.J. (2006). "Buckling strength of multi-story sway, non-sway and partially-sway frames with semi-rigid connections" Journal of Constructional Steel Research, Vol. 62, August, pp. 893-905. https://doi.org/10.1016/j.jcsr.2005.11.019
  16. Raftoyannis, I.G (2005). "The effect of semi-rigid joints and an elastic bracing system on the buckling load of simple rectangular steel frames" Journal of Constructional Steel Research, Vol. 61, pp. 1205-1225. https://doi.org/10.1016/j.jcsr.2005.01.005
  17. Sekulovic, M., and Salatic, R. (2001). "Nonlinear analysis of frames with flexible connections" Computer & Structures, Vol. 79, pp. 1097-1107. https://doi.org/10.1016/S0045-7949(01)00004-9
  18. Jin M.S., Kyung Y.S., Kim M.Y.(2004). "Determination of effective buckling length of plane frames" KSCE, Vol. 24, 3A, pp. 509-516.
  19. Min B.C., Min D.J., Jung M.R., Kim M.Y.(2011). "Stability analysis of shear-flexible and semi-rigid plane frames" KSCE, Vol. 31, 1A, pp. 9-18 (in Korean). https://doi.org/10.1016/j.msec.2010.09.013