DOI QR코드

DOI QR Code

Performance Evaluation on Static Loading and Cyclic Loading for Structural Insulated Panels

구조용단열패널의 정적가력과 반복가력 성능 평가

  • Nah, Hwan-Seon (Korea Electric Power Corporation Research Institute) ;
  • Lee, Hyeon-Ju (Korea Electric Power Corporation Research Institute) ;
  • Choi, Sung-Mo (The University of Seoul, Department of Architectural Engineering)
  • 나환선 (한국전력공사 전력연구원) ;
  • 이현주 (한국전력공사 전력연구원) ;
  • 최성모 (서울시립대학교 건축학부)
  • Received : 2012.12.20
  • Accepted : 2013.01.25
  • Published : 2013.03.31

Abstract

Structural insulated panels, structurally performed panels consisting of a plastic insulation bonded between two structural panel facings, are one of emerging products with a viewpoint of its energy and construction efficiencies. These components are applicable to fabricated wood structures. In Korea, there are few technical documents regulated structural performance and engineering criteria in domestic market. This study was conducted to identify fundamental performance of both monotonic load and quasi static cyclic load for SIPs in shear wall application. Static test results showed that maximum load was 44.3kN, allowable shear load was 6.1kN/m, shear stiffness was 1.23 M N/m, and ductility ratio was 3.6. Cyclic test was conducted by two kinds of specimens : single panel and double panels. Cyclic test results, which were equivalent to static test results, showed that maximum load was 45.42kN, allowable shear load was 6.3kN/m. Furthermore the accumulated energy dissipation capability for double panels was as 2.3 times as that for single panel. From performance of structural tests, it was recommended that the allowable shear load for panels was at least 6.1kN/m.

Keywords

References

  1. ANSI/APA PRS-610.1 Draft 4 (2008). Standard for Performance-Rated Structural Insulated Panels in Wall Applications. APA-The Engineered Wood Association, Tacoma, Washington, pp. 2-19.
  2. Borjen, Y., Thomas, W., and Edward, L. K. (2008). "Development of structural insulated panel standards." Structures Congress. ASCE.
  3. Durham, J., Lam, F., and Prion, H. G. L (2001). "Seismic Resistance of Wood Shear Walls with Large OSB Panels." J. Struct. Eng.. ASCE, Vol. 127, No. 12, pp. 1460-1466. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:12(1460)
  4. Edward, L. K. (2006). Standardization Tesing of Structural Insulated Panels(SIPs) for The Structural Insulated Panel Association. APA Report T2006P-33. APA-The Engineered Wood Association. Tacoma. Washington. pp. 4-13.
  5. He, M., Magnusson, H., Lam, F., and Prion, H. G. L. (1999). "Cyclic Performance of Perforated Wood Shear Walls with Oversize OSB Panels." J. Struct. Eng.. ASCE, Vol. 125, No. 1, pp. 10-18. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:1(10)
  6. Krawinkler, H., Parisi, F., Ibarra, L., Ayoub, A., and Medina, R. (2000). Development of a Testing Protocol for Woodframe Structures. CUREE Publication No. W-02. California.
  7. Mosalam, K. M., Hagerman, J., and Kelly, H. (2008). "Seismic Evaluation of Structural Insulated Panels." 5th International Engineering and Construction Conference, ASCE.
  8. Nah, H. S., Lee, H. J., Lee, C. H., Hwang, S. W., Cho, H. J., and Choi, S. M. (2012). "Evaluation on Structural Performance of Structural Insulated Panels. in Wall Application." J. Korean Soc. Adv. Comp. Strus. Vol. 3, No. 2, pp. 19-27. https://doi.org/10.11004/kosacs.2012.3.2.019
  9. U. S. Department of Housing and Urban Development (2007). Prescriptive Method for Structural Insulated Panels (SIPs) Used in Wall Systems in Residential Construction. Office of Policy Development and Research. Washington. pp. 1-40.

Cited by

  1. 구조단열패널 적용 저에너지주택의 총에너지사용량 평가 vol.4, pp.2, 2013, https://doi.org/10.11004/kosacs.2013.4.2.015
  2. 경량 복합패널의 면내 전단 성능 평가 vol.20, pp.1, 2019, https://doi.org/10.5762/kais.2019.20.1.9
  3. 경량 복합패널을 활용한 구호주거의 횡하중 저항성능 및 냉난방조명 에너지성능 평가 vol.20, pp.3, 2013, https://doi.org/10.5762/kais.2019.20.3.252