DOI QR코드

DOI QR Code

Fault Diagnosis of DC Link Electrolytic Capacitors in Inverter

인버터의 직류단 전해 커패시터 고장 진단

  • Yang, Jin-Kyu (Automation R&D Department, LS Industrial Systems)
  • Received : 2012.09.24
  • Accepted : 2013.01.02
  • Published : 2013.04.20

Abstract

Electrolytic capacitors used for smoothing DC link voltage is one of the major root causes of fault in power electronic system. The aging of aluminum electrolytic capacitors is expressed by the increase of their equivalent series resistance (ESR) and the reduction of their capacitance. Thus, the proposed technique in this paper is to measure capacitance, by comparing energy loss of DC link capacitors with stator resistor in electric machine. Condition of DC link capacitors can be estimated from the capacitance decrease rate between initial and aged capacitors. The results show that the proposed technique provides an easy, widely applicable and simple low cost solution for detecting dc link capacitor degradation.

Keywords

References

  1. Military Handbook 217 F, "Reliability prediction of electronic equipment," Revision F, Dec. 1991, Notice 1, 10 July 1992, Notice 2, Feb.28, 1995.
  2. Nippon Chemi-con Co., Judicious use of aluminum electrolytic capacitors, [Online]. Available: http://www.chemi-con.co.jp/e/catalog/pdf/al-e/al-sepa-e/001-guide/al-technote-e-120701.pdf
  3. Kemet Electronics Co. Electrolytic capacitors, [Online]. Available:http://www.kemet.com/kemet/web/homepage/kechome.nsf/weben/322E1646C60C72B285257713006ADB65/$file/F3304.pdf
  4. K. Lee, M. Kim, J. Yoon, S.B. Lee, and J. Yoo, "Condition Monitoring of DC Link Electrolytic Capacitors in Adjustable Speed Drives," IEEE Transactions on Industry Applications, Vol. 44, No. 5, pp. 1606-1613, Sep./Oct. 2008. https://doi.org/10.1109/TIA.2008.2002220
  5. X.-S. Pu, K.-H. Kim, D.-C. Lee, K.-B. Lee, J.-M. Kim, "Compensation of Temperature Characteristics for Capacitance Estimation of DC-Link Capacitors," Trans. of Korean Institute of Power Electronics, Vol. 15, No. 5, pp. 387-393, Oct. 2010. https://doi.org/10.6113/TKPE.2010.15.5.387
  6. "Fixed capacitors for use in electronic equipment, Part 4: Sectional specification-Aluminum electrolytic capacitors with solid non-solid electrolyte," IEC 60384-4.
  7. A. M. Imam, T. G. Habetler, R. G. Harley, and D. M. Divan, "Condition monitoring of electrolytic capacitor in power electronic circuits using adaptive filter modeling," in Proc. IEEE PESC, pp. 601-607, Sep. 2005
  8. E. Aeloiza, J. H. Kim, P. Enjeti, and P. Ruminot, "A real time method to estimate electrolytic capacitor condition in PWM adjustable speed drives and uninterruptible power supplies," in Proc. IEEE PESC, pp. 2867-2872, 2005.
  9. A. M. Imam, T. G. Habetler, R. G. Harley, and D. M. Divan, "Real-time condition monitoring of the electrolytic capacitors for power electronics applications," in Proc. IEEE Appl. Power Electron. Conf. Expo., pp. 1057-1061, 2007.
  10. M. L. Gasperi, "Life prediction modeling of bus capacitors in AC variable frequency drives," IEEE Trans. Ind. Appl., Vol. 41, No. 6, pp. 1430-1435, Nov./Dec. 2005. https://doi.org/10.1109/TIA.2005.858258
  11. K.-J. Lee, D.-C. Lee, J.-K. Seok, "Capacitance Estimation of DC-Link Capacitors of Three-phase AC/DC/AC PWM Converters using Input Current Injection," Trans. of Korean Institute of Power Electronics, Vol. 8, No. 2, pp. 173-179, Apr. 2003.
  12. K.-W. Lee, "Fault Diagnosis of a Electrolytic Capacitor for Inverter DC-Link Voltage Smoothing," Trans. of Korean Institute of Power Electronics, Vol. 12, No. 5, pp. 372-377, Oct. 2007.