DOI QR코드

DOI QR Code

Structural design of steel fibre reinforced concrete in-filled steel circular columns

  • Eltobgy, Hanan H. (Civil Engineering Department, Faculty of Engineering, Benha University (Shoubra district))
  • 투고 : 2012.08.22
  • 심사 : 2012.12.15
  • 발행 : 2013.03.25

초록

This paper presents the behavior and design of axially loaded normal and steel fiber reinforced concrete in-filled steel tube (SFRCFT) columns, to examine the contribution of steel fibers on the compressive strength of the composite columns. Non-linear finite element analysis model (FEA) using ANSYS software has been developed and used in the analysis. The confinement effect provided by the steel tube is considered in the analysis. Comparisons of the analytical model results, along with other available experimental outputs from literature have been done to verify the structural model. The compressive strength and stiffness of SFRC composite columns were discussed, and the interpretation of the FEA model results has indicated that, the use of SFRC as infill material has a considerable effect on the strength and stiffness of the composite column. The analytical model results were compared with the existing design methods of composite columns - (EC4, AISC/LRFD and the Egyptian code of Practice for Steel Construction, ECPSC/LRFD). The comparison indicated that, the results of the FEA model were evaluated to an acceptable limit of accuracy. The code design equations were modified to introduce the steel fiber effect and compared with the results of the FEA model for verification.

키워드

참고문헌

  1. ACI (1999) Building code requirements for structural concrete and commentary, ACI 318-99., Detroit (USA): American Concrete Institute.
  2. AISC (2005) "Load and resistance factor design specification for structural Steel buildings", AISC specification, Chicago: American Institute of Steel Construction.
  3. ANSYS verification manual, release 12.0. ANSYS, Inc. (2009), United States.
  4. Bentur, A. and Mindess, S. (1990), "Fiber reinforced cementations' composites", London: Elsevier.
  5. Egyptian code of practice for steel construction, Load and Resistance Factor Design ECPSC/LRFD (2007)
  6. Elchalakanim, M., and Zhao, X.L., (2008), "Concrete filled cold-formed circular steel tubes subjected to variable amplitude cyclic bending", J. of Structural. Eng., 30(2), 287-299. https://doi.org/10.1016/j.engstruct.2007.03.025
  7. Euro code 4. (2004), "Design of composite steel and concrete structures", Part 1.1, General rules and rules for buildings (with UK national application document), DD ENV 1994-1-1. London (UK): British Standards Institution.
  8. Gajalakshim P. and Heleana H.J., (2012), "Experimental Investigation on behavior of SFRC Infilled steel circular columns under axial compression", Proc. of the 10th Intl. Conf. on Advances in Steel Concrete Composite and Hybrid Structures, 257-264
  9. Han, L.H., Liu, W., Yang, Y.F. (2008), "Behavior of concrete-filled steel tubular stub columns subjected to axially local compression". J. of Const. Steel Res., 64(4), 377-387. https://doi.org/10.1016/j.jcsr.2007.10.002
  10. Hu, H.T., and Schnobrich, W.C., (1989), "Constitutive modeling of concrete by using non-associated plasticity", J. of Mater. Civil Eng., 1(4), 199-216. https://doi.org/10.1061/(ASCE)0899-1561(1989)1:4(199)
  11. Hu, H.T., Huang, C.S., Wu, M.H. and Wu, Y.M. (2003), "Nonlinear analysis of axially loaded concrete-filled tube columns with confinement effect", J. of Structural. Eng., ASCE, 129(10), 1322-1329. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:10(1322)
  12. Jaime H. R., Teresa, L. L, Juan, H. Z., and Miguel, P. L. (2009), "Computer simulation of failure process of a fiber-reinforced concrete composite with randomly distributed fiber clusters", J. of Reinforced Plastics and Composites, 28(13), 1613-1624. https://doi.org/10.1177/0731684408090361
  13. Kitad, (1998) "Ultimate strength and ductility of concrete filled steel bridge piers in Japan", J. of Eng. Struct., 20(4-6), 347-354. https://doi.org/10.1016/S0141-0296(97)00026-6
  14. Mander, J.B., Priestley, M.J.N., and Park, R. (1988) "Theoretical stress-strain model for confined concrete", J. of Struct. Eng., ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  15. Nataraja, M.C., Dhang, N. and Gupta, A.P. (1999) "Stress-strain curves for steel-fiber reinforced concrete under compression", Cement & Concrete Composites, 21(5-6), 383-390. https://doi.org/10.1016/S0958-9465(99)00021-9
  16. Richart, F.E., Brandzaeg, A. and Brown, R.L. (1928) "A study of the failure of concrete under combined compressive stresses", Bull. 185. Champaign (IL, USA): University of Illinois Engineering Experimental Station.
  17. Saenz, L.P., (1964) "Discussion of equation for the stress-strain curve of concrete by Desayi, P. and Krishnan, S.", J. of the American Conc. Inst., 61, 1229-1235.
  18. Sakino, K., Nakahara, H., Morino, S. and Nishiyama, I., (2004) "Behavior of centrally loaded concrete filled steel tube short columns", J. of Struct. Eng., ASCE, 130(2), 180-188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180)
  19. Yang, Y. F. and Han, L. H. (2009), "Experiments on rectangular concrete-filled steel tubes loaded axially on a partially stressed cross-sectional area", J. of Constr. Steel res., 65(8-9), 1616-1630.
  20. Yang, Y. F. and Han, L. H. (2011), "Behavior of concrete filled steel tubular (CFST) stub column under eccentric partial compression", Thin-walled Structures, 49(2), 379-395. https://doi.org/10.1016/j.tws.2010.09.024
  21. Yiyan Lu, Shan Li and Juan Chen (2011), "Research on behaviors of steel fiber reinforced concrete filled steel tube columns under axial load", Advanced Mater. Res., 167, 596-599

피인용 문헌

  1. Inelastic analysis for the post-collapse behavior of concrete encased steel composite columns under axial compression vol.19, pp.5, 2015, https://doi.org/10.12989/scs.2015.19.5.1237
  2. Seismic behavior of SFRC shear wall with CFST columns vol.28, pp.5, 2013, https://doi.org/10.12989/scs.2018.28.5.527
  3. Damage and stiffness research on steel shape steel fiber reinforced concrete composite beams vol.24, pp.6, 2013, https://doi.org/10.12989/cac.2019.24.6.513