DOI QR코드

DOI QR Code

Bridge deflection evaluation using strain and rotation measurements

  • Sousa, Helder (LABEST, Faculdade de Engenharia, Universidade do Porto) ;
  • Cavadas, Filipe (LABEST, Faculdade de Engenharia, Universidade do Porto) ;
  • Henriques, Abel (LABEST, Faculdade de Engenharia, Universidade do Porto) ;
  • Bento, Joao (Department of Civil Engineering and Architecture, Instituto Superior Tecnico) ;
  • Figueiras, Joaquim (LABEST, Faculdade de Engenharia, Universidade do Porto)
  • 투고 : 2011.10.03
  • 심사 : 2012.10.27
  • 발행 : 2013.04.25

초록

Monitoring systems currently applied to concrete bridges include strain gauges, inclinometers, accelerometers and displacement transducers. In general, vertical displacements are one of the parameters that more often need to be assessed because their information reflects the overall response of the bridge span. However, the implementation of systems to continuously and directly observe vertical displacements is known to be difficult. On the other hand, strain gauges and inclinometers are easier to install, but their measurements provide no more than indirect information regarding the bridge deflection. In this context, taking advantage of the information collected through strain gauges and inclinometers, and the processing capabilities of current computers, a procedure to evaluate bridge girder deflections based on polynomial functions is presented. The procedure has been implemented in an existing software system - MENSUSMONITOR -, improving the flexibility in the data handling and enabling faster data processing by means of real time visualization capabilities. Benefiting from these features, a comprehensive analysis aiming at assessing the suitability of polynomial functions as an approximate solution for deflection curves, is presented. The effect of boundary conditions and the influence of the order of the polynomial functions on the accuracy of results are discussed. Some recommendations for further instrumentation plans are provided based on the results of the present analysis. This work is supported throughout by monitoring data collected from a laboratory beam model and two full-scale bridges.

키워드

참고문헌

  1. Bjorck, A. (1996), Numerical methods for least squares problems, Philadelphia : Society for Industrial and Applied Mathematics.
  2. BRITE/EURAM (1997), SMART STRUCTURES - Integrated Monitoring Systems for Durability Assessment of Concrete Structures, Project $N^{\circ}$ BRPR-CT98-0751.
  3. Burdet, O. and Zanella, J.L. (2000), Automatic monitoring of bridges using electronic inclinometers, IABSE, Lucerne Congress Structural Engineering for Meeting Urban Transportation Challenges, IABSE, Lucerne Congress Structural Engineering for Meeting Urban Transportation Challenges: 398-399.
  4. Cavadas, F. and Oliveira, P. et al. (2009). Analise da resposta estrutural de uma viga de betao armado e pre-esforcado, simplesmente apoiada, face a duas cargas pontuais (internal report), Porto, .LABEST, Faculty of Engineering of the University of Porto
  5. Chung, W., Kim, S., Kim, N.S. and Lee, H.U. (2008), "Deflection estimation of a full scale prestressed concrete girder using long-gauge fiber optic sensors", Constr. Build. Mater., 22(3), 394-401. https://doi.org/10.1016/j.conbuildmat.2006.08.007
  6. Figueiras, J. and Felix, C. et al. (2010), Transducer for mesuring vertical displacements, Universidade do Porto and Instituto Politecnico do Porto. WO/2010/053392. Portugal.
  7. Hou, X., Yang, X. And Huang, Q. (2005), "Using inclinometers to measure bridge deflection", J. Bridge Eng., 10(5), 564-569. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:5(564)
  8. Massonnet, C. (1968), Resistance des materiaux. Paris, Dunod.
  9. Perdigao, V. and Barros, P. et al. (2006), "Development and implementation of a long term structural health monitoring", Proceedings of the IABMAS'06 - 3rd International Conference on Bridge Maintenance, Safety and Management, Porto, Portugal.
  10. Sousa, H. (2002), Comportamento de uma viga de betao armado e pre-esforcado em modelo reduzido, Estagio do PRODEP III. Porto, Engineering Faculty, University of Porto.
  11. Sousa, H., Dimande, A. et al. (2008), "MENSUSMONITOR - Tool for the treatment and interpretation of experimental results in Civil Engineering", CCC 2008 - Challenges for Civil Construction, FEUP-Faculty of Engineering, University Porto, Porto, FEUP.
  12. Sousa, H., Felix, C., Bento, J. and Figueiras, J. (2011), "Design and implementation of a monitoring system applied to a long-span prestressed concrete bridge", Struct. Concrete, 12(2), 82-93. https://doi.org/10.1002/suco.201000014
  13. Sousa, H., Matos, J. and Figueiras, J. (2006), "Development of an embedded sensor holder for concrete structures monitoring", Proceedings of the 2nd Congress fib, Naples, Italy.
  14. Van der Auweraer, H. and Peeters, B. (2003), "International research projects on structural health monitoring: an overview", Struct. Health Monit., 2(4), 341-358. https://doi.org/10.1177/147592103039836
  15. Vurpillot, S., Krueger, G., Benouaich, D., Clement, D. and Inaudi, D. (1998), "Vertical deflection of a pre-stressed concrete bridge obtained using deformation sensors and inclinometer measurements", ACI Struct. J., 95(5), 518-526.

피인용 문헌

  1. Shape Sensing Monitoring System Based on Fiber-Optic Strain Measurements: Laboratory Tests vol.41, pp.4, 2017, https://doi.org/10.1007/s40799-017-0187-0
  2. A BHR Composite Network-Based Visualization Method for Deformation Risk Level of Underground Space vol.10, pp.5, 2015, https://doi.org/10.1371/journal.pone.0127088
  3. Assessment of a bascule lift bridge using digital image correlation vol.170, pp.3, 2017, https://doi.org/10.1680/jbren.16.00022
  4. Bridge-Deflection Estimation through Inclinometer Data Considering Structural Damages vol.22, pp.2, 2017, https://doi.org/10.1061/(ASCE)BE.1943-5592.0000979
  5. Structural health monitoring system of bridges vol.199, 2017, https://doi.org/10.1016/j.proeng.2017.09.472
  6. Determination of heavy machines performances by using a measuring system with telemetric synchronization and transmission of signals vol.16, pp.4, 2018, https://doi.org/10.5937/jaes16-18981
  7. Prestressed Continuous Bridge Evaluation using Structural Health Monitoring System vol.473, pp.1757-899X, 2019, https://doi.org/10.1088/1757-899X/473/1/012048
  8. Measuring displacements of a railroad bridge using DIC and accelerometers vol.19, pp.2, 2013, https://doi.org/10.12989/sss.2017.19.2.225
  9. Damage localization and quantification in beams from slope discontinuities in static deflections vol.22, pp.3, 2013, https://doi.org/10.12989/sss.2018.22.3.291
  10. Long-Term Monitoring of Temperature Effect on Horizontal Rotation Angle at Beam Ends of a Railway Steel Truss Bridge vol.24, pp.10, 2013, https://doi.org/10.1061/(asce)be.1943-5592.0001484
  11. Performance Assessment Using a Field Test of a Short-Period Monitoring System: Tun Bridge Case Study vol.29, pp.4, 2019, https://doi.org/10.1080/10168664.2019.1632160
  12. Experimental Study on Continuous Bridge-Deflection Estimation through Inclination and Strain vol.25, pp.5, 2013, https://doi.org/10.1061/(asce)be.1943-5592.0001543
  13. Identifying damage in a bridge by analysing rotation response to a moving load vol.16, pp.7, 2013, https://doi.org/10.1080/15732479.2019.1680710
  14. Comparing Direct Observation of Torsion with Array-Derived Rotation in Civil Engineering Structures vol.21, pp.1, 2021, https://doi.org/10.3390/s21010142
  15. SHM-Oriented Hybrid Modeling for Stress Analysis of Steel Girder Bridge vol.26, pp.6, 2013, https://doi.org/10.1061/(asce)be.1943-5592.0001710
  16. Workflow for Off-Site Bridge Inspection Using Automatic Damage Detection-Case Study of the Pahtajokk Bridge vol.13, pp.14, 2013, https://doi.org/10.3390/rs13142665
  17. Maximum deflection of three span continuous bridge using rotation data based on 3 dimensional model vol.794, pp.1, 2013, https://doi.org/10.1088/1755-1315/794/1/012016
  18. Detection of beam-end fractures in steel members based on local stiffness calculated by strain response vol.241, pp.None, 2013, https://doi.org/10.1016/j.engstruct.2021.112419
  19. Modelling and forecasting of SHM strain measurement for a large-scale suspension bridge during typhoon events using variational heteroscedastic Gaussian process vol.251, pp.no.pa, 2022, https://doi.org/10.1016/j.engstruct.2021.113554