Journal of the Korean Society for Nondestructive Testing (비파괴검사학회지)

The Korean Society for Nondestructive Testing (한국비파괴검사학회)
권호 표지

Remarks on of Optimizations of Time-Resolved Pulse Thermography for Nondestructive Testing Evaluations

비파괴검사 평가를 위한 시간-분해 펄스열화상의 최적화에 관한 제고

  • 김원태 (적외선열화상분과, 공주대학교)
  • Published : 2013.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

펄스 열화상에서 서모그램 등 데이터의 플롯에 의해 표시되어지는 로그-로그 플롯을 활용해서 특정하게 정류(rectification)하여 펄스 서모그램을 잘 사용하도록 정의하고 열화상 신호복원(thermographic signal reconstruction; TSR) 기법에 의해 실험 데이터를 피팅하도록 한다, 이와 같은 물리적인 해석 및 수학적 대수기법에 의해 펄스열화상은 단순하면서도 효율적인 정규화가 가능하게 될 수 있다. 펄스열화상의 최적화는 로그대수 유도로 비교되는 콘트라스트(contrast)의 초기 검출과 TSR의 사용이라는 두 가지 돋보이는 접근 방법에 기반하여 이루어진다. 펄스자극열화상을 최적화하기 위해서 두 개의 매개변수, 즉 결함 콘트라스트의 신호 대 잡음비와 추출에 대한 선인식을 고려하는 것이 필요하다.

Keywords

References

  1. D. L. Balageas, J. C. Krapez and P. Cielo, "Pulsed photothermal medelling of layered material," J. of Applied Physics, Vol. 59, No. 4, pp. 348-357 (1986) https://doi.org/10.1063/1.336690
  2. D. L. Balageas, A. A. Deom and D. M. Boscher, "Characterization and non-destructive testing of carbon-epoxy composites by a pulsed photothermal method," J. of Materials and Evaluation, Vol. 45, No. 4, pp. 461-465 (1987)
  3. G. Busse, D. Wu, W. Karpen, "Thermal wave imaging with phase sensitive modulated thermography," J. of Applied Physics, Vol. 71, No. 8, pp. 3962-3965 (1992) https://doi.org/10.1063/1.351366
  4. X. Maldague and S. Marinetti, "Pulse phase thermography," J. of Applied Physics, Vol. 79, pp. 2694-2698 (1996) https://doi.org/10.1063/1.362662
  5. S. G. Pickering and D. P. Almond "An evaluation of the performance of an uncooled microbolometer array infrared camera for transient thermography NDE," J. of Nondestructive Testing and Evaluation, Vol. 22, No. 22, pp. 63-70 (2002)
  6. M. A. Omar and Y. Ahou, "Matched excitation energy comparison of the pulse and lock-in thermography NDE technique," Infrared Physics & Technology, Vol. 51, No. 4, pp. 300-306 (2008) https://doi.org/10.1016/j.infrared.2007.09.006
  7. S. G. Pickering and D. P. Almond "An evaluation of the performance of an uncooled microbolometer array infrared camera for transient thermography NDE," NDT&E International, Vol. 69, No. 8, pp. 935-942 (2011)
  8. T. Tazumi and Y. Takahashi, "Novel finite pulse-width correction in flash thermal diffusivity measurements," Review of Scientific Instruments, Vol. 52, No. 9, pp. 1411-1413 (1981) https://doi.org/10.1063/1.1136793
  9. D. L. Balageas, "Thickness or diffusivity measurements from front-face flash experiments using the TSR (thermographic signal reconstruction) approach," QIRT 2010 Proc., X. Maldague Ed., QC, Canada, pp. 873-880 (2010)
  10. P. Cielo, "Pulse photothermal evaluation of layered materials," J. of Applied Physics, Vol. 56, No. 1, pp. 230-234 (1984) https://doi.org/10.1063/1.333758
  11. J. C. Murphy, L. C. Aamodt and G. C. Wetsel, "Coating thickness determination using time dependent surface temperature measurements," Review of Progress in Quantitative Nondestructive Evaluation, Vol. 6A, pp. 277-284 (1987)
  12. H. Schenck, "Theory of Engineering Experintation," 3rd Ed. Hemisphere Publishing Co., (1979)
  13. S. M. Shepard, J. R. Lhota and T. Ahmed, "Measurements limits in flash thermogarphy," Thermosense XXXI, SPIE Proc., 2009-T-1, pp. 72990-72997 (2009)
  14. V. Vavilov, "Nondestructive Testing Handbook," Vol. 5, Book 1: Thermal/infrared testing, Moscow-Specktr Publishing House (2009)
  15. D. L. Balageas, P. Delpech, D. Boscher and D. Deom, "A new developments in stimulated infrared thermography applied to nondestructive testing of laminates," Review Progress in QNDE, Vol. 10A, pp. 1073-1081 (1991)
  16. D. L. Balageas, B. Chapuis, G. Deban and F. Passilly, "Improvement of the detection of defects by pulse thermography thanks to TSR approach in the case of a smart composite repair patch," QIRT Journal, 2010b, Vol. 7, No. 2, pp. 167-187 (2010) https://doi.org/10.3166/qirt.7.167-187