The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis of Transient Characteristics of a SFCL Applied Into Third-winding Transformer in a Single Line-to-ground Fault

1선 지락 사고 시 3 권선 변압기에 적용된 초전도 한류기의 동작 특성 분석

  • Received : 2013.04.25
  • Accepted : 2013.06.18
  • Published : 2013.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

Coercion transformer is commonly used in the electrical grid which in three phase of distribution system. The accident of the electrical grid is divided into a single, a double, a third line-to-ground faults and a double, a third line-to-line faults. A single line-to-ground fault accounts for nearly 75[%] among them. In this research, when a Superconducting Fault Current Limiters (SFCL) was applied to the three phase power system, operation in a single line-to-ground fault and limiting characteristics of fault current according to turns ratio of third winding were analyzed. When a single line-to-ground fault happened, secondary winding's circuit was open. Then third winding's circuit with a SFCL was closed. So fault current was limited by diverted circuit. At this time, we could find out that size of the limited fault current could be changed according to third winding rate. We confirmed that limiting operation of the fault current was carried out within one-period. These results will be utilized in adjusting the size of the SFCL.

Keywords

References

  1. T. Hara, T. Okuma, and T. Yamamoto, D. Ito K. Tasaki, K. Tsurunaga, "Development of a new 6.6kV/1500A class superconducting fault current limiter for electric power system," IEEE Trans, Appl. Power Delivery. vol. 8, no. 1, pp. 188-198, 1993.
  2. H. S. Choi, O. B. Hyun, and H. R. Kim, "Quench characteristics of resistive superconducting fault current limiters based on YBCO films," Physica C, vol. 351, pp. 415-420, 2001. https://doi.org/10.1016/S0921-4534(00)01632-4
  3. H. R. Kim, H. S. Choi, and H. R. Lim, I. S. Kim, O. B. Hyun, "Initial quench development in uniform Au/Y-Ba-Cu-O thin films," IEEE Trans, Appl. Superconduct, vol. 11, pp. 2414-2417, 2001. https://doi.org/10.1109/77.920349
  4. H. S. Choi, O. B. Hyun, and H. R. Kim, K. B. Park, "Switching properties of hybrid type superconducting fault current limiter using YBCO stripes," IEEE Trans, Appl. Superconduct, vol. 12, pp. 1833-1838, 2002. https://doi.org/10.1109/TASC.2002.801816
  5. H. R. Kim, S. W. Yim, and S. Y. Oh, O. B. Hyun, "Recovery in superconducting fault current limiters at low applied voltages," IEEE Trans. Appl. Superconduct, vol. 18, no. 2, pp. 656-659, 2008. https://doi.org/10.1109/TASC.2008.920809
  6. J. S. Kim, S. H. Lim, and J. C. Kim, "Study on protective coordination of a flux-lock type SFCL with over-current relay," IEEE Trans. Appl. Superconduct, vol. 20, no. 3, pp. 1159-1163, 2010. https://doi.org/10.1109/TASC.2010.2045749
  7. S. G. Choi, H. S. Choi, and Y. S. Cho, B. I. Jung, K. H. Ha, H. M. Park, "Characteristics of transformer-type superconducting fault current limiter depending on reclosing in changing the number of turns of secondary winding," Physica C, vol. 471, pp.1332-1336, 2011. https://doi.org/10.1016/j.physc.2011.05.189
  8. S. W. Yim, S. D. Yu, and H. R. Kim, M. J. Kim, C. R. Park, S. E. Yang, W. S. Kim, O. B. Hyun, J. Sim, K. B. Park, I. S. Oh, "construction of testing facilities and verifying tests of a 22.9kV/630A class superconducting fault current limiter", Physica C, vol. 470, pp. 1611-1614, 2010. https://doi.org/10.1016/j.physc.2010.05.173