DOI QR코드

DOI QR Code

Electrical properties of polyethylene composite films filled with nickel powder and short carbon fiber hybrid filler

  • Mironov, V.S. (Soft Innovative Materials Research Center, Korea Institute of Science and Technology) ;
  • Kim, Seong Yun (Soft Innovative Materials Research Center, Korea Institute of Science and Technology) ;
  • Park, Min (Soft Innovative Materials Research Center, Korea Institute of Science and Technology)
  • 투고 : 2013.02.14
  • 심사 : 2013.03.10
  • 발행 : 2013.04.30

초록

Effects of the amount of nickel powder (Ni) in Ni-carbon fiber (CF) hybrid filler systems on the conductivity(or resistivity) and thermal coefficient of resistance (TCR) of filled high density polyethylene were studied. Increases of the resistivity and TCR with increasing Ni concentration at a given hybrid filler content were observed. Using the fiber contact model, we showed that the main role of Ni in the hybrid filler system is to decrease the interfiber contact resistance when Ni concentration is less than the threshold point. The formation of structural defects leading to reduced reinforcing effect resulted in both a reduction of strength and an increase of the coefficient of thermal expansion in the composite film; these changes are responsible for the increases of both resistivity and TCR with increasing Ni concentration in the hybrid filler system.

키워드

참고문헌

  1. Arjmand M, Mahmoodi M, Gelves GA, Park S, Sundararaj U. Electrical and electromagnetic interference shielding properties of flow-induced oriented carbon nanotubes in polycarbonate. Carbon, 49, 3430 (2011). http://dx.doi.org/10.1016/j.carbon.2011.04.039.
  2. Gelves GA, Al-Saleh MH, Sundararaj U. Highly electrically conductive and high performance EMI shielding nanowire/polymer nanocomposites by miscible mixing and precipitation. J Mater Chem, 21, 829 (2011). http://dx.doi.org/10.1039/C0JM02546A.
  3. Kim SH, Jang SH, Byun SW, Lee JY, Joo JS, Jeong SH, Park MJ. Electrical properties and EMI shielding characteristics of polypyrrole-nylon 6 composite fabrics. J Appl Polym Sci, 87, 1969 (2003). http://dx.doi.org/10.1002/app.11566.
  4. Yang Q, Wei S, Cheng G. Preparation of conductive polyaniline/ epoxy composite. Polym Compos, 27, 201 (2006). http://dx.doi. org/10.1002/pc.20176.
  5. Immonen K, Nattinen K, Sarlin J, Hartikainen J. Conductive plastics with hybrid materials. J Appl Polym Sci, 114, 1494 (2009). http://dx.doi.org/10.1002/app.30767.
  6. Zavickis J, Knite M, Podins G, Linarts A, Orlovs R. Polyisoprenenanostructured carbon composite-a soft alternative for pressure sensor application. Sensors Actuators A, 171, 38 (2011). http:// dx.doi.org/http://dx.doi.org/10.1016/j.sna.2011.05.035.
  7. Ciselli P, Lu L, Busfield JJC, Peijs T. Piezoresistive polymer composites based on EPDM and MWNTs for strain sensing applications. e-Polymers, 14 (2010).
  8. Chen L, Chen GH, Lu L. Piezoresistive behavior study on fingersensing silicone rubber/graphite nanosheet nanocomposites. Adv Funct Mater, 17, 898 (2007). http://dx.doi.org/10.1002/adfm.200600519.
  9. Isaji S, Bin Y, Matsuo M. Electrical and self-heating properties of UHMWPE-EMMA-NiCF composite films. J Polym Sci B, 47, 1253 (2009). http://dx.doi.org/10.1002/polb.21722.
  10. Wang J, Guo W, Cheng S, Zhang Z. Structure and applications of CB/crystal fluoride resin alloy in self-regulated heating cables. J Appl Polym Sci, 88, 2664 (2003). http://dx.doi.org/10.1002/app.12078.
  11. Kim TA, Kim HS, Lee SS, Park M. Single-walled carbon nanotube/ silicone rubber composites for compliant electrodes. Carbon, 50, 444 (2012). http://dx.doi.org/10.1016/j.carbon.2011.08.070.
  12. Park J, Lee A, Yim Y, Han E. Electrical and thermal properties of PEDOT:PSS films doped with carbon nanotubes. Synth Met, 161, 523 (2011). http://dx.doi.org/10.1016/j.synthmet.2011.01.006.
  13. Rathy I, Kuki A, Borda J, Deak G, Zsuga M, Marossy K, Keki S. Preparation and characterization of poly(vinyl chloride)-continuous carbon fiber composites. J Appl Polym Sci, 124, 190 (2012). http://dx.doi.org/10.1002/app.33617.
  14. Selzer R, Friedrich K. Mechanical properties and failure behaviour of carbon fibre-reinforced polymer composites under the influence of moisture. Composites A, 28, 595 (1997). http://dx.doi. org/10.1016/S1359-835X(96)00154-6.
  15. Balta Calleja FJ, Bayer RK, Ezquerra TA. Electrical conductivity of polyethylene-carbon-fibre composites mixed with carbon black. J Mater Sci, 23, 1411 (1988). http://dx.doi.org/10.1007/BF01154609.
  16. Shen L, Wang FQ, Yang H, Meng QR. The combined effects of carbon black and carbon fiber on the electrical properties of composites based on polyethylene or polyethylene/polypropylene blend. Polym Test, 30, 442 (2011). http://dx.doi.org/10.1016/j.polymertesting.2011.03.007.
  17. Gokturk HS, Fiske TJ, Kalyon DM. Effects of particle shape and size distributions on the electrical and magnetic properties of nickel/ polyethylene composites. J Appl Polym Sci, 50, 1891 (1993). http://dx.doi.org/10.1002/app.1993.070501105.
  18. Gokturk HS, Fiske TJ, Kalyon DM. Electric and magnetic properties of a thermoplastic elastomer incorporated with ferromagnetic powders. IEEE Trans Magn, 29, 4170 (1993). http://dx.doi. org/10.1109/20.280866.
  19. Qin FX, Peng HX, Pankratov N, Phan MH, Panina LV, Ipatov M, Zhukova V, Zhukov A, Gonzalez J. Exceptional electromagnetic interference shielding properties of ferromagnetic microwires enabled polymer composites. J Appl Phys, 108, 044510 (2010). http://dx.doi.org/10.1063/1.3471816.
  20. Mironov VS, Park M, Kim J, Lim S, Choe C. Effect of sizing agent on the properties of carbon fiber/polyethylene composite film. J Mater Sci Lett, 20, 1211 (2001). http://dx.doi. org/10.1023/A:1010918721998.
  21. Weber M, Kamal MR. Estimation of the volume resistivity of electrically conductive composites. Polym Compos, 18, 711 (1997). http://dx.doi.org/10.1002/pc.10324.
  22. Meyer J. Stability of polymer composites as positive-temperaturecoefficient resistors. Polym Eng Sci, 14, 706 (1974). http://dx.doi. org/10.1002/pen.760141009.

피인용 문헌

  1. Compatibility of Functionalized Graphene with Polyethylene and Its Copolymers vol.2013, pp.1687-4129, 2013, https://doi.org/10.1155/2013/805201
  2. Superhydrophobic carbon-based materials: a review of synthesis, structure, and applications vol.15, pp.2, 2014, https://doi.org/10.5714/CL.2014.15.2.089
  3. A comprehensive study of metal-coated short carbon fibers, graphite particles, and hybrid fillers for induction heating pp.1530-7980, 2018, https://doi.org/10.1177/0892705718806344