Carbon letters

Korean Carbon Society (한국탄소학회)
권호 표지
DOI QR코드

DOI QR Code

Methanol oxidation behaviors of PtRu nanoparticles deposited onto binary carbon supports for direct methanol fuel cells

  • Park, Soo-Jin (Korea CCS R&D Center, Korea Institute of Energy Research) ;
  • Park, Jeong-Min (Korea CCS R&D Center, Korea Institute of Energy Research) ;
  • Lee, Seul-Yi (Korea CCS R&D Center, Korea Institute of Energy Research)
  • Received : 2012.12.15
  • Accepted : 2013.01.26
  • Published : 2013.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, PtRu nanoparticles deposited on binary carbon supports were developed for use in direct methanol fuel cells using carbon blacks (CBs) and multi-walled carbon nanotubes (MWCNTs). The particle sizes and morphological structures of the catalysts were analyzed using X-ray diffraction and transmission electron microscopy, and the PtRu loading content was determined using an inductively coupled plasma-mass spectrometer. The electrocatalytic characteristics for methanol oxidation were evaluated by means of cyclic voltammetry with 1 M $CH_3OH$ in a 0.5 M $H_2SO_4$ solution as the electrolyte. The PtRu particle sizes and the loading level were found to be dependent on the mixing ratio of the two carbon materials. The electroactivity of the catalysts increased with an increasing MWCNT content, reaching a maximum at 30% MWCNTs, and subsequently decreased. This was attributed to the introduction of MWCNTs as a secondary support, which provided a highly accessible surface area and caused morphological changes in the carbon supports. Consequently, the PtRu nanoparticles deposited on the binary support exhibited better performance than those deposited on the single support, and the best performance was obtained when the mass ratio of CBs to MWCNTs was 70:30.

Keywords

References

  1. Gerteisen D. Transient and steady-state analysis of catalyst poisoning and mixed potential formation in direct methanol fuel cells. J Power Sources, 195, 6719 (2010). http://dx.doi.org/10.1016/j.jpowsour.2010.04.004.
  2. Jung N, Cho YH, Ahn M, Lim JW, Kang YS, Chung DY, Kim J, Cho YH, Sung YE. Methanol-tolerant cathode electrode structure composed of heterogeneous composites to overcome methanol crossover effects for direct methanol fuel cell. Int J Hydrogen Energy, 36, 15731 (2011). http://dx.doi.org/10.1016/j.ijhydene.2011.09.054.
  3. Harish S, Baranton S, Coutanceau C, Joseph J. Microwave assisted polyol method for the preparation of Pt/C, Ru/C and PtRu/C nanoparticles and its application in electrooxidation of methanol. J Power Sources, 214, 33 (2012). http://dx.doi.org/10.1016/j.jpowsour.2012.04.045.
  4. Park SJ, Park JM. Preparation and characteristic of platinum catalyst deposited on boron-doped carbon nanotubes. Curr Appl Phys, 12, 1248 (2012). http://dx.doi.org/10.1016/j.cap.2012.02.057.
  5. Burstein GT, Barnett CJ, Kucernak AR, Williams KR. Aspects of the anodic oxidation of methanol. Catal Today, 38, 425 (1997). http://dx.doi.org/10.1016/S0920-5861(97)00107-7.
  6. Dinh HN, Ren X, Garzon FH, Piotr Z, Gottesfeld S. Electrocatalysis in direct methanol fuel cells: in-situ probing of PtRu anode catalyst surfaces. J Electroanal Chem, 491, 222 (2000). http://dx.doi. org/10.1016/S0022-0728(00)00271-0.
  7. Kim S, Park SJ. Electroactivity of Pt-Ru/polyaniline composite catalyst-electrodes prepared by electrochemical deposition methods. Solid State Ionics, 178, 1915 (2008). http://dx.doi.org/10.1016/j.ssi.2007.12.074.
  8. Eguiluz KIB, Salazar-Banda GR, Miwa D, Machado SAS, Avaca LA. Effect of the catalyst composition in the Ptx(Ru-Ir)1-x/C system on the electro-oxidation of methanol in acid media. J Power Sources, 179, 42 (2008). http://dx.doi.org/10.1016/j.jpowsour.2007.12.070.
  9. Bagotzky VS, Vassiliev YB, Khazova OA. Generalized scheme of chemisorption, electrooxidation and electroreduction of simple organic compounds on platinum group metals. J Electroanal Chem, 81, 229 (1977). http://dx.doi.org/10.1016/S0022-0728(77)80019-3.
  10. Han KI, Lee JS, Park SO, Lee SW, Park YW, Kim H. Studies on the anode catalysts of carbon nanotube for DMFC. Electrochim Acta, 50, 791 (2004). http://dx.doi.org/10.1016/j.electacta.2004.01.115.
  11. Knupp SL, Li W, Paschos O, Murray TM, Snyder J, Haldar P. The effect of experimental parameters on the synthesis of carbon nanotube/nanofiber supported platinum by polyol processing techniques. Carbon, 46, 1276 (2008). http://dx.doi.org/10.1016/j.carbon.2008.05.007.
  12. Sakaguchi M, Uematsu K, Sakata A, Sato Y, Sato M. Correlation between wettability of carbon carriers and activity of porous electrodes. Electrochim Acta, 34, 625 (1989). http://dx.doi. org/10.1016/0013-4686(89)85005-4.
  13. Wang X, Hsing IM, Yue PL. Electrochemical characterization of binary carbon supported electrode in polymer electrolyte fuel cells. J Power Sources, 96, 282 (2001). http://dx.doi.org/10.1016/S0378-7753(00)00625-X.
  14. Nam K, Lim S, Kim SK, Peck DH, Jung DH. Mechanical milling of catalyst support for enhancing the performance in fuel cells. Powder Technol, 214, 423 (2011). http://dx.doi.org/10.1016/j.powtec.2011.08.041.