DOI QR코드

DOI QR Code

Combustion Performance Test of Syngas Gas in a Model Gas Turbine Combustor - Part 1 : Flame Stability

모델 가스터빈 연소기에서 합성가스 연소성능시험 - Part 1 : 화염안정성

  • Lee, Min Chul (Korea Electric Power Corporation, KEPCO Research Institute) ;
  • Joo, Seong Pil (Seoul National University, School of Mechanical and Aeronautic Engineering) ;
  • Yoon, Jisu (Seoul National University, School of Mechanical and Aeronautic Engineering) ;
  • Yoon, Youngbin (Seoul National University, School of Mechanical and Aeronautic Engineering)
  • Received : 2013.04.12
  • Accepted : 2013.07.19
  • Published : 2013.08.01

Abstract

This paper describes on the flame stability and combustion instability of coal derived synthetic gas especially for gases of Buggenum IGCC in Netherlands and Taean IGCC in Korea. These combustion characteristics were observed by conducting ambient-pressure elevated-temperature combustion tests in GE7EA model combustor when varying heat input and nitrogen dilution ratio. Flame stability map is plotted according to the flame structure by dividing all regimes into six, and only regime I and II are identified to be stable. Both syngases of Taean and Buggenum with nitrogen integration corresponds to regime II in which syngas burnt stably and flame coupled with outer recirculation flow. Stable regime of Buggenum is larger than that of Taean when considering only $H_2$/CO ratio due to higher content of hydrogen. However, when considering nitrogen dilution, syngas of Taean is burnt more stably than that of Buggenum since more nitrogen in Buggenum has negative effect on the stability of flame.

본 논문에서는 네덜란드 부게넘 및 국내 태안 IGCC플랜트의 석탄으로부터 생성된 합성가스의 화염안정성 및 연소불안정성에 대해 기술하였다. GE7EA 모사 가스터빈 연소기를 대상으로 상압 고온 연소시험을 수행하여 입열량 및 질소희석에 따른 연소특성을 관찰하였다. 시험결과를 통해 화염안정화 선도는 화염의 구조에 따라 Regime I부터 VI까지 6개의 영역으로 구분하였고, 2개의 영역(Regime I, II)에서 화염이 안정적으로 연소되는 것을 확인하였다. 태안 및 부게넘 합성가스 모두 안정하게 연소되고, 화염이 외부 재순환 유동과 결합되는 Regime II에 해당하는 것을 확인하였다. 또한 $H_2$/CO비만을 고려하면 수소의 함량이 높은 부게넘 가스가 안정적 연소구간이 넓지만, 질소희석을 고려할 때 부게넘 가스 내의 더 많은 질소가 화염안정성에 부정적 영향을 미치기 때문에 태안 합성가스가 부게넘 합성가스보다 더 안정적으로 연소하였다.

Keywords

References

  1. D.R. Noble, Q. Zhang, A. Shareef, J. Tootle, A Meyers, T. Lieuwen, 2006, "Syngas Mixture Composition Effects upon Flashback and Blowout", ASME Turbo Expo 2006, GT2006-90470.
  2. Natarajan, J., Lieuwen, T., Seitzman, J., "Laminar Flame Speeds of $H_{2}$/CO mixtures: Effect of $CO_{2}$ Dilution, Preheat Temperature, and Pressure" Combustion and Flame, Vol. 151, 2007, pp.104-19. https://doi.org/10.1016/j.combustflame.2007.05.003
  3. Whitty, K.J., Zhang, H. R., Eddings, E.G., "Emissions from Syngas Combustion", Combustion Science and Technology, Vol. 180, 2008, pp.1117-1136. https://doi.org/10.1080/00102200801963326
  4. Hasegawa, T., Tamaru, T., "Gas Turbine Combustion Technology Reducing both Fuel-NOx and Thermal NOx Emissions for Oxygen-blown IGCC with Hot/dry Synthetic Gas Cleanup", Journal of Engineering of Gas Turbine and Power, Vol. 129(2), 2007, pp.358-369. https://doi.org/10.1115/1.2432896
  5. Lee, M.C., Seo S.B., Chung J.W., Kim S.M., Joo Y.J., Ahn D.H., "Gas Turbine Combustion Performance Test of Hydrogen and Carbon Monoxide Synthetic Gas", Fuel, Vol. 89, 2010, pp.1485-91. https://doi.org/10.1016/j.fuel.2009.10.004
  6. Lee, M.C., Seo S.B., Yoon J., Kim M., Yoon Y., "Experimental Study on the Effect of $N_{2}$, $CO_{2}$, and Steam Dilution on the Combustion Performance of $H_{2}$ and CO Synthetic Gas in an Industrial Gas Turbine", Fuel, Vol 102, 2012, pp.431-438. https://doi.org/10.1016/j.fuel.2012.05.028
  7. Lee, M.C., Yoon J., Joo S. P., Yoon Y., "Combustion Performance Test of Syngas Gas in a Model Gas Turbine Combustor - Part 1 : Flame Stability" J. of The Korean Society for Aeronautical and Space Sciences, Vol 41(8), 2013, pp. 522-560.