DOI QR코드

DOI QR Code

메탄가스 흡착을 위한 메조포러스 카본 합성과 표면 특성 연구

Synthesis and surface characterization of mesoporous carbon for the adsorption of methane gas

  • 박상원 (계명대학교 환경과학과) ;
  • 이갑두 (계명대학교 환경과학과) ;
  • 노민수 (계명대학교 환경과학과)
  • Park, Sang-Won (Department of Environmental Science, Keimyung University) ;
  • Lee, Kamp-Du (Department of Environmental Science, Keimyung University) ;
  • Noh, Min-Soo (Department of Environmental Science, Keimyung University)
  • 투고 : 2012.12.11
  • 심사 : 2013.04.04
  • 발행 : 2013.07.31

초록

This study was designed to synthesize mesoporous carbon, porous carbonic material and to characterize its surface in an attempt to adsorption methane gas($CH_4$). Synthesis of mesoporous carbon was carried out under two steps ; 1. forming a RF-silica complex with a mold using CTMABr, a surfactant, and TEOS, raw material of silica, and 2. eliminating silica through carbonization and HF treatment. The mesoporous carbon was synthesized under various conditions of synthesis time and calcination. Eight different types of mesoporous carbon, which were designated as MC1, MC2, MC3, MC4, MCT1, MCT2, MCT3, and MCT4, were prepared depending upon preparation conditions. The analysis of mesoporous carbon characteristics showed that the calcination of silica stabilized the mixed structure of silica and carbonic complex, and made the particle uniform. The results also showed that hydrothermal synthesis time did not have a strong influence on the size of pore. The bigger specific surface area was obtained as the hydrothermal synthesis time was extended. However, the specific surface area was getting smaller again after a certain period of time. In adsorption experiments, $CH_4$ was used as adsorbate. For the case of $CH_4$, MCT3 showed the highest adsorption efficiency.

키워드

참고문헌

  1. Bansal, C. R., Donnet, J. B., Stoeckli, F., 1988, Active carbon, New york: Marcel Dekker.
  2. Chen, J., Xia, N., Zhou, T., Tan, S., Jiang, F., Yuan, D., 2009, Mesoporous carbon spheres: synthesis, characterization and supercapacitance, Int. J. Electrochem. Sci., 4, 1063-1073.
  3. Foley, H. C., 1995, Carbogenic molecular sieves: synthesis, properties and applications, Microporous Mater., 4, 407-433. https://doi.org/10.1016/0927-6513(95)00014-Z
  4. Hwang, I. S., 2005, Study on the Kyoto Protocol and the corresponding system of Korea, Paper of masters degree, Ulsan University.
  5. IUPAC, 1972, Manual of symbols and terminology, Appendix 2, Part 1, Colloid and surface chemistry, Pure Appl. Chem., 31, 578.
  6. Kaneda, M., Tsubakiyama, T., Carlsson, A., Sakamoto, Y., Ohsuna, T., Terasaki, O., Joo, S. H., Ryoo, R., 2002, Structural study of mesoporous MCM-48 and carbon networks synthesized in the spaces of MCM-48 by electron crystallography, J. Phys. Chem. B., 106, 1256-1257.
  7. Kawabuchi, Y., Kawano, S., Mochida, I., 1996, Molecular sieving selectivity of active carbons and active carbon fibers improved by chemical vapour deposition of benzene, Carbon, 34, 711-717. https://doi.org/10.1016/0008-6223(95)00173-5
  8. Kruk, M., Jaroniec, M., Ryoo, R., Joo, S. H., 2000, Characterization of ordered mesoporous carbons synthesized using MCM-48 silica as templates, J. Phys. Chem. B., 104, 7960. https://doi.org/10.1021/jp000861u
  9. Lazaro, M. J., Calvillo, L., Bordeje, E. G., Moliner, R., Juan, R., Ruiz, C. R., 2007, Functionalization of ordered mesoporous carbons synthesized with SBA-15 silica as template, Microporous Mesoporous Mater., 103, 158-165. https://doi.org/10.1016/j.micromeso.2007.01.047
  10. Lozano-Castello, D., Alcaniz-Monge, J., Cazorla-Amoros, D., Linares-Solano, A., Zhu, W., Kapteijn, F., Moulijn, J. A., 2005, Adsorption properties of carbon molecular sieves prepared from an activated carbon by pitch pyrolysis, Carbon, 43, 1643-1651. https://doi.org/10.1016/j.carbon.2005.01.042
  11. Lee, J. W., Han, S. J., Hyeon, T. H., 2004, Synthesis of new nanoporous carbon material using silica nanostrustured templates, J. Korean Ind. Eng. Chem., 15, 483-492.
  12. Ministry of Commerce, Industry and Energy Korea Energy Economics Institute, 2003, UNFCCC & The Kyoto Protocol, Korea Energy Economics Institute, Gyeonggido.
  13. Moon, S. H., Park, S. Y., 2007, Selective separation of $CO_{2}$/CH4 by pore structure modification of activated carbon fiber, J. of KSEE, 29, 1027-1034.
  14. Orfanoudaki, T., Skodras, G., Dolios, I., Sakellaropoulos G. P., 2003, Production of carbon molecular sieves by plasma treated activated carbon fibers, Fuel, 82, 2045-2049. https://doi.org/10.1016/S0016-2361(03)00172-8
  15. Ryoo, R., Jun, S., 2001, Recent progress on ordered mesoporous carbon molecular sieves synthesized using templated synthesis method, J. Korean Ind. Eng. Chem., 12, 1-4.
  16. Ryoo, R., Joo, S. H., Kruk, M., Jaroniec, M., 2001, Ordered mesoporous carbons, Adv. Mater., 13, 677-681. https://doi.org/10.1002/1521-4095(200105)13:9<677::AID-ADMA677>3.0.CO;2-C
  17. Shim, J. W., Moon, S. H., 2004, Adsorption/desorption characteristics of CH4, $CO_{2}$ gas on activated carbon fiber, Proceedings of KSEE, 2004, 1242-1249.
  18. Yeom, J. S., 2010, A Study on the climatic change convention & policy of the Korea, Paper of masters degree, Kwangwoon University
  19. Ying, J. Y., Mehner, C. P., Wong, M. S., 1999, Synthesis and applications of supramolecular-templated mesoporous materials, Angew Chem., Int., Ed 38, 56-77. https://doi.org/10.1002/(SICI)1521-3773(19990115)38:1/2<56::AID-ANIE56>3.0.CO;2-E
  20. Zhang, J., Wang, H., Dalai, A. K., 2008, Effects of metal content on activity and stability of Ni-Co bimetallic catalysts for $CO_{2}$ reforming of $CH_{4}$, Appl. catalysis A: General, 339, 121-129. https://doi.org/10.1016/j.apcata.2008.01.027