Journal of Electrical Engineering and Technology

  • 제8권5호
  • /
  • Pages.1146-1151
  • /
  • 2013
  • /
  • 1975-0102(pISSN)
  • /
  • 2093-7423(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

Design Considerations and Validation of Permanent Magnet Vernier Machine with Consequent Pole Rotor for Low Speed Servo Applications

  • Chung, Shi-Uk (Electric Motor Research Center, Korea Electrotechnology Research Institute) ;
  • Chun, Yon-Do (Electric Motor Research Center, Korea Electrotechnology Research Institute) ;
  • Woo, Byung-Chul (Electric Motor Research Center, Korea Electrotechnology Research Institute) ;
  • Hong, Do-Kwan (Electric Motor Research Center, Korea Electrotechnology Research Institute) ;
  • Lee, Ji-Young (Electric Motor Research Center, Korea Electrotechnology Research Institute)
  • 투고 : 2011.11.30
  • 심사 : 2013.05.13
  • 발행 : 2013.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with design consideration and validation of a new pole-slot combination for permanent magnet vernier machine (PMVM) with consequent pole (CP) rotor especially for extremely low speed servo applications. A 136pole-24slot PMVM with CP rotor is introduced and analyzed by 2D and 3D finite element analysis (FEA) and discussion on experimental validation is also included.

키워드

참고문헌

  1. A. Toba, and A. Lipo, "Novel dual-excitation perernier manent magnet vernier machine," Proc. IEEE IAS Annual Meeting, Oct. 1999, , Vol. 4, pp. 2539-2544.
  2. A. Toba, and A. Lipo, "Generic torque-maximizing design methodology of surface permanent-magnet vernier machine," IEEE Trans. Ind. Appl., Vol. 36, No. 6, pp. 1539-1546, Nov./Dec. 2000. https://doi.org/10.1109/28.887204
  3. E. Spooner, and L. Haydock, "Vernier hybrid machines," in Proc. IEE Electr. Power Appl. No. 6, pp. 655-662, Nov. 2003.
  4. J. Li, K.T. Chau, J.Z. Jiang, C. Liu, and W. Li, "A new efficient permanent-magnet vernier machine for Wind Power Generation," IEEE Trans. Magn., Vol.46, No. 6, pp. 1475-1478, June 2010. https://doi.org/10.1109/TMAG.2010.2044636
  5. S. Niu, S.L. Ho, W.N. Fu, and L.L. Wang, "Quantitative comparison of novel vernier permanent magnet machines," in IEEE Trans. Magn. Vol. 46, No. 6, pp. 2032-2035, June 2010. https://doi.org/10.1109/TMAG.2010.2042429
  6. C. Liu, J. Zhong, and K. T. Chau, "A novel fluxermanent-controllable vernier permanent-magnet machine," IEEE Trans. Magn., Vol. 47, No. 10, pp. 4238-4241, Oct. 2011. https://doi.org/10.1109/TMAG.2011.2152374
  7. S. Niu, S. L. Ho, W. N. Fu, "A novel direct-drive dual-structure permanent magnet machine," IEEE Trans. Magn., Vol. 46 No. 6, pp. 2036-2039, June 2010. https://doi.org/10.1109/TMAG.2010.2041197
  8. S. U. Chung, J. W. Kim, B. C. Woo, D. K. Hong, J. Y Lee, and D. H. Koo, "A novel design of modular three-phase permanent magnet vernier machine with consequent pole rotor," IEEE Trans. Magn., Vol. 47, No. 10. pp. 4215-4218, Oct. 2011. https://doi.org/10.1109/TMAG.2011.2157324
  9. D.G. Dorrell, M.F. Hsieh, and Y.G. Guo, "Unbalanced magnet pull in large brushless rare-earth permanent magnet motors with rotor eccentricity," IEEE Trans. Magn., Vol. 45, No. 10, pp. 4586-4589, Oct. 2009. https://doi.org/10.1109/TMAG.2009.2022338

피인용 문헌

  1. Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines vol.63, pp.7, 2016, https://doi.org/10.1109/TIE.2016.2532285
  2. Development of a 20-Pole–24-Slot SPMSM With Consequent Pole Rotor for In-Wheel Direct Drive vol.63, pp.1, 2016, https://doi.org/10.1109/TIE.2015.2472375