DOI QR코드

DOI QR Code

Estimation of Pyrolysis Properties for Fire Propagation Analysis of Furniture Materials

가구소재의 화재전파해석을 위한 열해리 물성 평가

  • Received : 2013.08.26
  • Accepted : 2013.08.28
  • Published : 2013.08.31

Abstract

The present study has been conducted to investigate the reaction kinetics and pyrolysis parameters for flame propagation analysis of furniture material components. TGA measurement for component materials such as MDF (medium density fiberboad) panel including coating material, synthetic leather and foam cushion are performed under maximum temperature of $600^{\circ}C$ and heating rate of $10^{\circ}C/min$. The results of TGA have shown that the peak temperature of MDF panel was $324^{\circ}C$ and the initial peak temperature of coating material decreased by $270{\sim}280^{\circ}C$. In the case of synthetic leather and foam materials, the reference temperature and reference rate depend on the type of polymer consisting the sample, the initial kinetic characteristics was classified into 2 categories of about $270^{\circ}C$ and $420^{\circ}C$ of reference temperature for the tested synthetic materials. The present study showed the pyrolysis parameters of reference temperature and reference rate proposed by Lyon to evaluate the pre-exponential factor and activation energy. The present study can contribute to improve the reliability of computational fire analysis and enhance the understanding of fire propagation phenomena based on the thermal properties study of material.

본 연구는 가구류를 구성하는 주요 재료의 열적조건에 따른 반응특성과 화염전파해석에 필요한 열해리 물성을 제공하기 위해 열중량분석을 수행하였다. 실험대상 시편은 가구류에 널리 적용되는 MDF 판재와 코팅재, 합성피혁과 쿠션재 등이며 가열율 $10^{\circ}C/min$, 최대 온도 $600^{\circ}C$까지 실험을 수행하였다. 실험결과 MDF 소재의 경우 $324^{\circ}C$에서 피크 반응을 나타냈었으며 MDF 코팅재의 경우 초기 피크반응온도가 $270{\sim}280^{\circ}C$로 감소하였다. 합성피혁과 폼 소재의 경우 재료를 구성하는 폴리머의 종류에 따라 기준온도와 기준 반응율이 차이를 보였으나 기준온도는 $270^{\circ}C$$420^{\circ}C$ 정도로 비교적 유사한 경향을 나타냈다. Lyon 등이 제시한 방법에 의해 반응상수와 활성화 에너지를 산정하기 위해 시편의 기준 온도와 기준 반응율을 제시하였으며 이러한 기초 물성연구를 통해 화염전파특성을 이해함과 동시에 화재해석의 신뢰성을 향상시키는데 기여하고자 한다.

Keywords

References

  1. C. H. Hwang, "Effects of Change in Heat Release Rate on Unsteady Fire Characteristics in a Semi-Closed Compartment", Journal of Korean Institute of Fire Science & Engineering, Vol. 26, No. 2, pp. 75-83 (2012). https://doi.org/10.7731/KIFSE.2012.26.2.075
  2. S. C. Kim, G. H. Ko and S. H. Lee, "On the Reliability of the Computational Fire Model Based on the Yield Rate Concept of Combustion Gases", Journal of Korean Institute of Fire Science & Engineering, Vol. 23, No. 4, pp. 130-136 (2009).
  3. C. S. Ahn, H. Y. Kim, Y. H. Yoo and H. J. Kim, "A Numerical Analysis for Fire Spread Mechanism of Residuential Building Fire", Journal of Korean Institute of Fire Science & Engineering, Vol. 26, No. 1, pp. 31-37 (2012). https://doi.org/10.7731/KIFSE.2012.26.1.031
  4. S. C. Kim and S. H. Lee, "Assessment of Grid Sensitivity in the FDS Field Model to Simulate the Flame Propagation of an Electric Cable Fire", Journal of the Korean Society of Safety, Vol. 23, No. 4, pp. 30-35 (2008).
  5. K. McGrattan, R. McDermott, S. Hostikka and J. Floyd, "Fire Dynamics Simulator (Version 5) Technical Reference Guide", NIST Special Publication 1018-5, National Institute of Standards and Technology, Gaithersburg, MD (2010).
  6. R. E. Lyon, "An Integral Method of Nonisothermal Kinetic Analysis", Thermochimica Acta, Vol. 297, No. 1, pp. 117-124 (1997). https://doi.org/10.1016/S0040-6031(97)00158-5
  7. R. E. Lyon, "Heat Release Kinetics", Fire and Materials, Vol. 24, No. 4, pp. 179-186 (2000). https://doi.org/10.1002/1099-1018(200007/08)24:4<179::AID-FAM736>3.0.CO;2-V
  8. S. Hostikka and K. B. McGrattan, "Large Eddy Simulation of Wood Combustion", Proceedings of 9th International Interflam Conference, pp. 755-762 (2001).
  9. T. Fateh, T. Rogaume, J. Luche, F. Richard and F. Jabouille, "Kinetic and Mechanism of the Thermal Degradation of a Plywood by Using Thermogravimetry and Fourier-transformed Infrared Spectroscopy Analysis in Nitrogen and Air Atmosphere", Fire Safety Journal, Vol. 58, pp. 25-37 (2013). https://doi.org/10.1016/j.firesaf.2013.01.019
  10. D. W. Kim, J. M. Lee, J. S. Kim and P. K. Seon, "Study on the Combustion Characteristics of Wood-pellet and Korean Anthracite Using TGA", Korean Chemical Engineering Research, Vol. 48, No. 1, pp. 58-67 (2010).