DOI QR코드

DOI QR Code

Strength design criterion for asymmetrically reinforced RC circular cross-sections in bending

  • Hernandez-Montes, E. (Department of Structural Mechanics, University of Granada) ;
  • Alameda-Hernandez, P. (Department of Civil Engineering, University of Granada) ;
  • Gil-Martin, L.M. (Department of Structural Mechanics, University of Granada)
  • 투고 : 2012.01.09
  • 심사 : 2012.12.03
  • 발행 : 2013.06.01

초록

Asymmetrical reinforcement for circular sections in wall piles is an efficient construction component with reduced embodied energy. It has been proven that asymmetrical reinforced wall piles may save more than 50% of the reinforcement than the traditional symmetrically reinforced circular sections. The use of this new type of structural member increases the number of variables in the design problem, which makes its use by engineers more complicated. In order to facilitate the use of the asymmetrically reinforced piles, this paper presents a criterion for the design of this type of structural member. The chosen criterion has been analyzed with the help of flexural capacity-cost curves. The new criterion is similar to the design procedure traditionally used for RC beams.

키워드

참고문헌

  1. Aschheim, M., Hernandez-Montes, E. and Gil-Martin, L.M. (2008), "Optimal domains for flexural and axial loading", ACI Struct. J., 105(6), 720-728.
  2. Belarbi, A., Prakash, S. and You, Y.M. (2009), "Effect of spiral reinforcement on flexural-shear-torsional seismic behavior of reinforced concrete circular bridge columns", Struct. Eng. Mech., 33(2), 137-158. https://doi.org/10.12989/sem.2009.33.2.137
  3. Chakrabarty, B.K. (1992), "Model for optimal design of concrete beam", J. Struct. Eng., 118(11), 3238-3242. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:11(3238)
  4. Cype Ingenieros, S.A. (2011), Software for architecture, engineering and construction, www.cype.es.
  5. Eurocode 2 (2002), Design of concrete structures- Part 1: General rules and rules for buildings prEN, European Committee for Standardization, Brussels.
  6. Gil-Martin, L.M., Hernandez-Montes, E. and Aschheim, M. (2010a), "Optimal reinforcement of RC columns for biaxial bending", Mater. Struct., 43(9), 1245-1256. https://doi.org/10.1617/s11527-009-9576-x
  7. Gil-Martin, L.M., Hernandez-Montes, E. and Aschheim, M. (2010b), "Optimization of piers for retaining walls", Struct. Multidiscip. O., 41(6), 979-987. https://doi.org/10.1007/s00158-010-0481-2
  8. Gil-Martin, L.M., Aschheim, M., Hernandez-Montes, E. and Pasadas-Fernandez, M. (2011), "Recent developments in optimal reinforcement of RC beam and column sections", Eng. Struct., 33(4), 1170-1180. https://doi.org/10.1016/j.engstruct.2010.12.038
  9. Guerra, A. and Kiousis, P.D. (2006), "Design optimization of reinforced concrete structures", Comput. Concrete, 3(5), 313-334. https://doi.org/10.12989/cac.2006.3.5.313
  10. Hernandez-Montes, E., Gil-Martin, L.M. and Aschheim, M. (2005), "The design of concrete members subjected to uniaxial bending and compression using reinforcement sizing diagrams", ACI Struct. J., 102(1),150-158.
  11. Hernandez-Montes, E., Gil-Martin, L.M., Pasadas-Fernandez, M. and Aschheim, M. (2008), "Theorem of optimal reinforcement for reinforced concrete cross sections", Struct. Multidiscip. O., 36(5), 509-521. https://doi.org/10.1007/s00158-007-0186-3
  12. Hernandez-Montes, E., Gil-Martin, L. and Aschheim, M. (2010), "Pilotes asimetricos para contencion de tierras", Revista de Obras Publicas, 157(3508), 31-38.
  13. Lee, H.J., Aschheim, M., Hernandez-Montes, E., and Gil-Martin, L.M. (2009), "Optimum RC column reinforcement considering multiple load combination", Struct. Multidiscip. O., 32(2), 153-170.
  14. Narayan, K.S.B. and Venkataramana, K. (2007), "Shape optimization of steel reinforced concrete beams", Comput. Concrete, 4(4), 317-330. https://doi.org/10.12989/cac.2007.4.4.317
  15. Topal, U. and Uzman, U. (2006), "Optimal design of laminated composite plates to maximise fundamental frequency using MFD method", Struct. Eng. Mech., 24(4), 479-491. https://doi.org/10.12989/sem.2006.24.4.479
  16. Weber, K. and Ernst, M. (1989), "Entwicklung von Interaktionsdiagrammen fur asymmetrisch bewehrte Stahlbeton- reisquerschnitte", Beton Stahlbetonbau, 84(7), 176-180. https://doi.org/10.1002/best.198900260
  17. Wiese, H., Curbach, M., Speck, K., Weiland, S., Eckfeldt, L. and Hampel, T. (2004), "Rissbreitennachweis fur Kreisquerschnitte", Beton Stahlbetonbau, 99(4), 253-261.
  18. Whitney, C.S. and Cohen, E. (1956), "Guide for ultimate strength design of reinforced concrete", ACI J., 28(5), 445-490.

피인용 문헌

  1. Effective area in tension stiffening of reinforced concrete piles subjected to flexure according to Eurocode 2 vol.76, 2014, https://doi.org/10.1016/j.engstruct.2014.06.041
  2. Theoretical and experimental in-service long-term deflection response of symmetrically and non-symmetrically reinforced concrete piles vol.17, pp.2, 2017, https://doi.org/10.1016/j.acme.2016.12.003