DOI QR코드

DOI QR Code

Prediction of lightweight concrete strength by categorized regression, MLR and ANN

  • Tavakkol, S. (Hydraulic Structures Division, Water Research Institute) ;
  • Alapour, F. (Dept. of Civil and Environmental Engineering, Amirkabir University of Technology) ;
  • Kazemian, A. (Dept. of Civil and Environmental Engineering, Amirkabir University of Technology) ;
  • Hasaninejad, A. (Dept. of Civil Engineering, Shahed University) ;
  • Ghanbari, A. (Dept. of Computer Engineering and IT, Amirkabir University of Technology) ;
  • Ramezanianpour, A.A. (Concrete Technology and Durability Research Center, Amirkabir University of Technology)
  • 투고 : 2012.11.11
  • 심사 : 2013.02.09
  • 발행 : 2013.08.01

초록

Prediction of concrete properties is an important issue for structural engineers and different methods are developed for this purpose. Most of these methods are based on experimental data and use measured data for parameter estimation. Three typical methods of output estimation are Categorized Linear Regression (CLR), Multiple Linear Regression (MLR) and Artificial Neural Networks (ANN). In this paper a statistical cleansing method based on CLR is introduced. Afterwards, MLR and ANN approaches are also employed to predict the compressive strength of structural lightweight aggregate concrete. The valid input domain is briefly discussed. Finally the results of three prediction methods are compared to determine the most efficient method. The results indicate that despite higher accuracy of ANN, there are some limitations for the method. These limitations include high sensitivity of method to its valid input domain and selection criteria for determining the most efficient network.

키워드

참고문헌

  1. Alshihri, M., Azmy, A. and El-Bisy, M. (2009), "Neural networks for predicting compressive strength of structural light weight concrete", Constr. Build.mater., 23(6), 2214-2219. https://doi.org/10.1016/j.conbuildmat.2008.12.003
  2. Andic-Cakir, O. and Hizal, S. (2012), "Influence of elevated temperatures on the mechanical properties and microstructure of self consolidating lightweight aggregate concrete", Constr. Build.mater., 34, 575-583. https://doi.org/10.1016/j.conbuildmat.2012.02.088
  3. Capecchi, V., Buscema, M., Contucci, P. and D'Amore, B. (2010), Applications of Mathematics in Models, Artificial Neural Networks and Arts, Springer, Heidelberg, Dordrecht, London, New York.
  4. Chandra, S. and Berntsson, L. (2002), Lightweight Aggregate Concrete Science: Technology and Application, Noyes Publications.
  5. Chattefuee, S. and Hadi, A. (2006), Regression Analysis by Example, 4th Edition, JOHN WILEY & SONS.
  6. Clarke, J.L. (1993), Structural Lightweight Aggregate Concrete, Taylor & Francis.
  7. Cui, H.Z., Lo, T., Memon, S.H., Xing, F. and Shi, X. (2012), "Analytical model for compressive strength, elastic modulus and peak strain of structural lightweight aggregate concrete", Constr. Build.mater., 36, 1036-1043. https://doi.org/10.1016/j.conbuildmat.2012.06.034
  8. Dafico, D.A., and Prudencio, L.R. (2002), "A simple model to explain compressive strength of high-performance concrete", High performance concrete: performance and quality of concrete structures proceedings, Third International Conference, American Concrete Institute.
  9. Fedorov, V., Mannino, F. and Zhang, R. (2009), Consequences of dichotomization. Pharm Stat, 8:50-61. https://doi.org/10.1002/pst.331
  10. Heaton, J.T. (2008), Introduction to Neural Networks With Java, 2nd edition, Heaton Research.
  11. Huang, J.L., Huang, P.Y., Li, Z.W. and Zheng, X. (2010), "Prediction of bond strength of FRP-concrete based on multiple linear regression method", Adv. Mater. Res., 163-167.
  12. Golias, M., Castro, J. and Weiss, J. (2012), "The influence of the initial moisture content of lightweight aggregate on internal curing", Constr. Build.mater., 35, 52-62. https://doi.org/10.1016/j.conbuildmat.2012.02.074
  13. Topcu, I. and Saridemir, M. (2008), "Prediction of rubberized concrete properties using artificial neural network and fuzzy logic", Constr. Build.mater., 22, 532-540. https://doi.org/10.1016/j.conbuildmat.2006.11.007
  14. Oreta, A. and Ongpeng, J. (2011), "Modeling the confined compressive strength of hybrid circular concrete columns using neural networks", Comput. Concr.: Int. J., 8(5).
  15. Nazari, A. and Mozafari, M. (2012), "Simulation of structural features on mechanochemical synthesis of Al2O3-TiB2 nanocomposite by optimized artificial neural network", Adv. Powder Tech., 23(2), 220-227. https://doi.org/10.1016/j.apt.2011.02.011
  16. Mazaheripour, H., Ghanbarpour, S., Mirmoradi, S.H., Hosseinpour, I. (2011), "The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete", Constr. Build. Mater., 25(1), 351-358. https://doi.org/10.1016/j.conbuildmat.2010.06.018
  17. Rogers, J.L. (1994), "Simulating structural analysis with neural networks", ASCE J. Comput. Civil Eng., 8(2), 252-2265. https://doi.org/10.1061/(ASCE)0887-3801(1994)8:2(252)
  18. Swingler, K. (1996), Applying Neural Networks a Practical Guide, Academic Press, New York, London.
  19. Kewalramani, M.A. and Gupta, R. (2006), "Concrete compressive strength prediction using ultrasonic pulse velocity through artificial neural networks", Automat. Constr., 15, 374-379. https://doi.org/10.1016/j.autcon.2005.07.003
  20. Lin, Y., Lai, C.P. and Yen, T. (2003), "Prediction of ultrasonic pulse velocity (UPV) in concrete", ACI Mater. J., 100(1), 21-28.
  21. Rawlings, J., Pantula, S. and Dickey, D., (1998), Applied Regression Analysis: A Research Tool, 2nd edition, Springer.
  22. Royston, P., Altman, D. and Sauerbrei. W. (2006), "Dichotomizing continuous predictors in multiple regression: a bad idea", Stat. Med., 25, 127-141. https://doi.org/10.1002/sim.2331
  23. Yuzer, N., Akbas, B. and Kizilkanat, A.B. (2011), "Predicting the high temperature effect on mortar compressive strength by neural network", Comput. Concr., Int. J., 8(5), 491-511. https://doi.org/10.12989/cac.2011.8.5.491
  24. Zain, M. and Abd, S.M. (2009), "Multiple regression model for compressive strength prediction of high performance concrete", J. Appl. Sci., 9, 155-160. https://doi.org/10.3923/jas.2009.155.160

피인용 문헌

  1. Torsional parameters importance in the structural response of multiscale asymmetric-plan buildings vol.1, pp.4, 2016, https://doi.org/10.12989/mmm.2016.1.4.285
  2. Modeling of Compressive Strength for Self-Consolidating High-Strength Concrete Incorporating Palm Oil Fuel Ash vol.9, pp.12, 2016, https://doi.org/10.3390/ma9050396
  3. Effects of pre-soaked super absorbent polymers on fresh and hardened properties of self-consolidating lightweight concrete vol.113, 2016, https://doi.org/10.1016/j.conbuildmat.2016.03.010
  4. Shear forces amplification due to torsion, explicit reliance on structural topology. Theoretical and numerical proofs using the Ratio of Torsion (ROT) concept vol.61, pp.1, 2013, https://doi.org/10.12989/sem.2017.61.1.015
  5. Shear forces amplification due to torsion, explicit reliance on structural topology. Theoretical and numerical proofs using the Ratio of Torsion (ROT) concept vol.61, pp.1, 2013, https://doi.org/10.12989/sem.2017.61.1.015
  6. Torsional parameters importance in the structural response of multiscale asymmetric-plan buildings vol.6, pp.1, 2013, https://doi.org/10.12989/csm.2017.6.1.055
  7. Predicting Performance of Lightweight Concrete with Granulated Expanded Glass and Ash Aggregate by Means of Using Artificial Neural Networks vol.12, pp.12, 2019, https://doi.org/10.3390/ma12122002
  8. Prediction Model for Mechanical Properties of Lightweight Aggregate Concrete Using Artificial Neural Network vol.12, pp.17, 2013, https://doi.org/10.3390/ma12172678
  9. Comparison between Multiple Regression Analysis, Polynomial Regression Analysis, and an Artificial Neural Network for Tensile Strength Prediction of BFRP and GFRP vol.14, pp.17, 2013, https://doi.org/10.3390/ma14174861
  10. Comparison of data mining methods to predict mechanical properties of concrete with fly ash and alccofine vol.15, pp.None, 2013, https://doi.org/10.1016/j.jmrt.2021.09.024
  11. Application of Artificial Neural Networks to Predict Insulation Properties of Lightweight Concrete vol.11, pp.22, 2021, https://doi.org/10.3390/app112210544