DOI QR코드

DOI QR Code

Structural analysis and optimization of large cooling tower subjected to wind loads based on the iteration of pressure

  • Li, Gang (Department of Engineering Mechanics, State Key Laboratory of Structural Analysis of Industrial Equipment, Dalian University of Technology) ;
  • Cao, Wen-Bin (Department of Engineering Mechanics, State Key Laboratory of Structural Analysis of Industrial Equipment, Dalian University of Technology)
  • 투고 : 2011.05.04
  • 심사 : 2013.04.24
  • 발행 : 2013.06.10

초록

The wind load is always the dominant load of cooling tower due to its large size, complex geometry and thin-wall structure. At present, when computing the wind-induced response of the large-scale cooling tower, the wind pressure distribution is obtained based on code regulations, wind tunnel test or computational fluid dynamic (CFD) analysis, and then is imposed on the tower structure. However, such method fails to consider the change of the wind load with the deformation of cooling tower, which may result in error of the wind load. In this paper, the analysis of the large cooling tower based on the iterative method for wind pressure is studied, in which the advantages of CFD and finite element method (FEM) are combined in order to improve the accuracy. The comparative study of the results obtained from the code regulations and iterative method is conducted. The results show that with the increase of the mean wind speed, the difference between the methods becomes bigger. On the other hand, based on the design of experiment (DOE), an approximate model is built for the optimal design of the large-scale cooling tower by a two-level optimization strategy, which makes use of code-based design method and the proposed iterative method. The results of the numerical example demonstrate the feasibility and efficiency of the proposed method.

키워드

참고문헌

  1. Architectural Institute of Japan (1996), "Recommendations for loads on building", Architectural Institute of Japan, Tokyo.
  2. Bao, K.Y., Shen, G.H. and Sun, B.N. (2009), "Numerical simulation of mean wind load on large hyperbolic cooling tower", Acta Aerodynamica Sinica, 27(6), 650-655.
  3. Bruno, J., Destrebecq, J.F. and Alain, V. (1999), "Incremental analysis of time-dependent effects in composite Structures", Computers and Structures, 73, 425-435. https://doi.org/10.1016/S0045-7949(98)00269-7
  4. Busch, D., Harte, R., Kratzig, W.B. and Montag, U. (2002), "New natural draft cooling tower of 200m of height", Eng. Struct., 24, 1509-1521. https://doi.org/10.1016/S0141-0296(02)00082-2
  5. Chen, W.F. and Eric, M.L. (2005), Handbook of structural engineering, CRC Press, Boca Raton, New York.
  6. GB 50009-2001 (2002), Load code for the design of building structures, China Architecture & Building Press, China.
  7. GB/T 50102-2003 (2003), Code for design of cooling for industrial recirculating water, China Planning Press, China.
  8. Holland, J.H. (1975), Adaptation in natural and artificial systems: An introductory analysis with applications to biology, control, and artificial intelligence, University of Michigan Press, Michigan
  9. Hyuk, C.N. (2006), "Nonlinear behavior and ultimate load bearing capacity of reinforced concrete natural draught cooling tower shell", Eng. Struct., 28,399-410. https://doi.org/10.1016/j.engstruct.2005.08.016
  10. Li, J.Y., Ren, C.L. and Huang, Z.L. (2007), "Experiment study and finite element analysis of a natural draft cooling tower", Chinese Quarterly of Mechanics, 3(28), 443-447.
  11. Liu, M.H. (2000), "Optimized calculation and model selection of double curved cooling towers", Electric Power Construction, 10, 35-41.
  12. Meroney, R.N. (2006), "CFD prediction of cooling tower drift", Journal of Wind Engineering and Industrial Aerodynamics, 94, 463-490. https://doi.org/10.1016/j.jweia.2006.01.015
  13. Mohammadi, B. and Pironneau, O. (1993), Analysis of the K-epsilon turbulence model, Wiley, Chichester and New York and Paris.
  14. Montgomery, D.C. (2008), Design and Analysis of Experiments, 7rded, John Wiley and Sons, New York.
  15. Noorzaei, J., Naghshineh, A., Abdul Kadir, M.R., Thanoon, W.A. and Jaafar, M.S. (2006), "Nonlinear interative analysis of cooling tower?foundation?soil interaction under unsymmetrical wind load", Thin-Walled Structures, 44, 997-1005. https://doi.org/10.1016/j.tws.2006.08.019
  16. Rafat, A.W. and Masud, B. (2010), "Cross winds effect on the performance of natural draft wet cooling towers", International Journal of Thermal Sciences, 49, 218-224. https://doi.org/10.1016/j.ijthermalsci.2009.07.012
  17. Shen, G.H., Liu, R.F. and Sun, B.N. (2007), "Numerical simulation of wind load on cooling towers under double-tower condition", Journal of Zhejiang University (Engineering Science),41(6),1017-1022.
  18. Shi, Y.J. and Wang, D.Z. (1979), "Test method of cooling tower", Thermal Power Generation, 9, 1-31.
  19. Viladkar, M.N., Karisiddappa, P.B. and Godbole, P.N. (2006), "Static soil-structure interaction response of hyperbolic cooling towers to symmetrical wind loads", Eng. Struct., 28, 1236-1251. https://doi.org/10.1016/j.engstruct.2005.11.010
  20. Waszczyszyn, Z., Pabisek, E., Pamin, J. and Radwan´ska, M. (2000), "Nonlinear analysis of a RC cooling tower with geometrical imperfections and a technological cut-out", Eng. Struct., 22, 480-489. https://doi.org/10.1016/S0141-0296(98)00122-9
  21. Wu, J.K. (1996), "Retrospect and prospect about structural analysis of large cooling tower", Mechanics in Engineering, 18(6), 1-5.
  22. Zhao, S.A. (2006), Salt water cooling tower, China WaterPower Press, Bei Jing.

피인용 문헌

  1. Stability and Reinforcement Analysis of Superlarge Exhaust Cooling Towers Based on a Wind Tunnel Test vol.141, pp.12, 2015, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001309
  2. Interference effect and the working mechanism of wind loads in super-large cooling towers under typical four-tower arrangements vol.170, 2017, https://doi.org/10.1016/j.jweia.2017.08.006
  3. Multi-dimensional extreme aerodynamic load calculation in super-large cooling towers under typical four-tower arrangements vol.25, pp.2, 2017, https://doi.org/10.12989/was.2017.25.2.101
  4. Multi-dimensional wind vibration coefficients under suction for ultra-large cooling towers considering ventilation rates of louvers vol.66, pp.2, 2013, https://doi.org/10.12989/sem.2018.66.2.273