DOI QR코드

DOI QR Code

Development of A FBG Sensor Interrogator for Detecting Strain and Performance Comparison of Peak Detection Algorithms

변형 검출을 위한 FBG 센서 인테로게이터 개발과 피크검출 알고리즘 성능 비교

  • Received : 2013.06.21
  • Accepted : 2013.08.23
  • Published : 2013.08.30

Abstract

FBG sensors are mainly used to measure strain and temperature of structures. In this paper, an interrogator of FBG sensors is developed and implemented to measure the crack of structures using FPGA and DSP. Developed interrogator consists of an optical source, an optical circulator, an optical grating and a CCD sensor and controller. The spectrum of the reflected light from the FBG sensor is analyzed and peak wavelength is detected. Next, strain of structure can be measured using shift of peak wavelength. Centroid algorithm and Gaussian fitting which are mainly applied to detect peak wavelength of the interrogator are compared in this paper. As a result of experiment, Gaussian fitting is suitable for a developed interrogator.

FBG센서는 구조물의 변형과 온도 측정에 주로 사용되고 있다. 본 논문에서는 FBG센서를 이용하여 균열을 측정하기 위하여 FPGA와 DSP를 이용하여 인테로게이터를 개발 구현하였다. 개발한 인테로게이터는 광원, 광서큘레이터, 광그레이팅 그리고 CCD센서 및 제어기로 구성된다. FBG센서로부터 반사된 광원의 스펙트럼을 분석하여 피크 파장를 검출하고 피크 파장의 변이를 이용하여 구조물의 변형 정도를 측정한다. 본 논문에서는 FBG센서 인테로게이터의 피크 검출 알고리즘에 주로 적용하는 중심점 알고리즘과 Gaussian 근사법을 비교한다. Gaussian 근사법에 개발한 인테로게이터에 적합함을 실험을 통하여 확인한다.

Keywords

References

  1. Hong Min Lee, Byung Kwan Oh, Hyo Seon Park, "A Study on the Safety Evaluation of Structural Members Based on Strain Sensors", Proc., of 2010 Annual Conference of Computational Structural Engineering Institute of Koera, pp. 700-703, 2010.
  2. Hyuntae Kim, Yumi Kim, Jingyu Do, Jangsik Park, and Yunsik Yu, "Development of FBG Sensor for Structure Deformation Measurement", International Journal of Security and Its Applications, Vol. 6, No. 2, pp. 251-256, 2012.
  3. Keun-Ho Rew, Seok-Jo Go, Jang-Sik Park, Ki-Ho Yu and Seung-Hoon Lee, "Design of Automatic Tension Control Device for a Vibrating Wire Sensor", Proc. of 12th International Conference on Control, Automation and System, Oct. 2012.
  4. Sang-Seok Kim, Jang-Sik Park, Seok-Jo Go and Hee-Jong Ro, "Design and Development of Strain Measurement System Based on Zigbee Wireless Network", Journal of the Korea Institute of Electronics Communications Sciences, Vol. 7, No. 2, pp. 585-590, 2012.
  5. Young-Baig Kim, "A Study on the Implementation of Wireless Sensor Network for Managing Bridges", Journal of the Korea Institute of Electronics Communications Sciences, Vol. 6, No. 5, pp. 783-788, 2011.
  6. Hyun-Sik Shin, "A Study on South Korea's Disaster Safety of Wireless Communication", Journal of the Korea Institute of Electronics Communications Sciences, Vol. 6, No. 1, pp. 1-6, 2011.
  7. K. O. Hill, Y. Fujii, D. C. Johnson, B. S. Kawasaki, "Photosensitivity in Optical Fiber Waveguides: Application to Reflection Fiber Fabrication", Applied Physics Letters Vol. 32, Issue. 10, 647, 1978. https://doi.org/10.1063/1.89881
  8. Yu-Mi Kim, Nam-Kwon Lee, Seung-Hwan Lee, Dong-Myung Bae and Yun-Sik Yu, "Study on FBG Sensors for Hull Stress Monitering", Journal of Sensor Science and Techonology, Vol. 21, No. 4, pp. 276-282, 2012. https://doi.org/10.5369/JSST.2012.21.4.276
  9. Shellee D. Dyer, Paul A. Williams, R. J. Espejo, Jonathan D. Kofler and Shelley. M. Etzel, "Fundamental Limits in Fiber Bragg Grating Peak Wavelength Measurements (Invidted Paper)", Proc. of 17th International Conference on Optical Fibre Sensors, pp. 88-93, Aug., 2005.
  10. L. Negri, A. Nied, H. Kalinowski and A. Patero, "Benchmark for Peak Detection Algorithms in Fibre Bragg Grating Interrogation and a New Neural Network for Its Performance Improvement", Sensors, pp. 3466- 3482, 2011.