대한산업공학회지 (Journal of Korean Institute of Industrial Engineers)

  • 제39권5호
  • /
  • Pages.351-360
  • /
  • 2013
  • /
  • 1225-0988(pISSN)
  • /
  • 2234-6457(eISSN)
대한산업공학회 (Korean Institute of Industrial Engineers)
권호 표지
DOI QR코드

DOI QR Code

다구치의 동적 강건설계와 그 대안에 관한 고찰

A Review on the Taguchi Method and Its Alternatives for Dynamic Robust Design

  • 김성준 (강릉원주대학교 산업정보경영공학과)
  • Kim, Seong-Jun (Department of Industrial, Information and Management Engineering Gangneung-Wonju National University)
  • 투고 : 2013.07.26
  • 심사 : 2013.09.09
  • 발행 : 2013.10.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Taguchi's robust design is a method for quality improvement by making a system insensitive to uncontrollable variations incurred by noise factors and it has received much attention in a wide range of engineering fields. Robust design can be broadly classified into static and dynamic ones. This paper is concerned with dynamic robust design. Taguchi suggested to use a signal-to-noise ratio as a robustness measure, but there has been much debate and criticism on its blind use. In order to cope with this drawback, many alternatives have been proposed. They are divided into performance measure modeling (PMM) and response function modeling (RFM) approaches. In this paper, both PMM and RFM approaches for dynamic robust design are reviewed. An example for illustration is provided as well.

키워드

참고문헌

  1. Box, G. E. P. (1988), Signal-to-Noise Ratios, Performance Criteria, and Transformations, with discussions, Technometrics, 30, 1-40. https://doi.org/10.1080/00401706.1988.10488313
  2. Dasgupta, T., Miller, A., and Wu, C. F. J. (2010), Robust Design of Measurement Systems, Technometrics, 52(1), 80-92. https://doi.org/10.1198/TECH.2009.06112
  3. Fogliatto, F. S. (2008), Multiresponse Optimization of Products with Functional Quality Characteristics, Quality and Reliability Engineering International, 24, 927-939. https://doi.org/10.1002/qre.939
  4. Goethals, P. L. and Cho, B. R. (2011), The Development of a Robust Design Methodology for Time-oriented Dynamic Quality Characteristics with a Target Profile, Quality and Reliability Engineering International, 27, 403-414. https://doi.org/10.1002/qre.1122
  5. Govaerts, B. and Noel, J. (2005), Analysing the Results of a Designed Experiment When the Response is a Curve : Methodology and Application in Metal Injection Moulding, Quality and Reliability Engineering International, 21, 509-520. https://doi.org/10.1002/qre.737
  6. Gupta, S., Kulahci, M., Montgomery, D. C., and Borror C. M. (2010), Analysis of Signa-Response Systems Using Generalized Linear Mixed Models, Quality and Reliability Engineering International, 26, 375-385.
  7. Joseph, V. R. (2003), Robust Parameter Design with Feed-Forward Control, Technometrics, 45(4), 284-292. https://doi.org/10.1198/004017003000000113
  8. Joseph, V. R. and Wu, C. F. J. (2002), Robust Parameter Design of Multiple Target Systems, Technometrics, 44(4), 338-346. https://doi.org/10.1198/004017002188618536
  9. Kim, S. J. (2003), A Comparison of Empirical Analysis Procedures for the Taguchi Robust Design, Proceedings of 2003 Spring Conference of Korean Society for Quality Management, 586-591.
  10. Leon, R. V., Shoemaker, A. C., and Kacker, R. N. (1987), Performance Measures Independent of Adjustment : An Explanation and Extension of Taguchi's Signal-to-Noise Ratios, with discussions, Technometrics, 29, 253-265. https://doi.org/10.1080/00401706.1987.10488231
  11. Lesperance, M. L. and Park, S. M. (2003), GLMs for the Analysis of Robust Designs with Dynamic Characteristics, Journal of Quality Technology, 35(3), 253-263. https://doi.org/10.1080/00224065.2003.11980219
  12. Lunani, M., Nair, V. N. and Wasserman, G. S. (1997), Graphical Methods for Robust Design with Dynamic Characteristics, Journal of Quality Technology, 29(3), 327-338. https://doi.org/10.1080/00224065.1997.11979774
  13. Miller, A. (2002), Analysis of Parameter Design Experiments for Signal-Response Systems, Journal of Quality Technology, 34(2), 139-151. https://doi.org/10.1080/00224065.2002.11980141
  14. Miller, A. and Wu, C. F. J. (1996), Parameter Design for Signal-Response Systems : A Different Look at Taguchi's Dynamic Parameter Design, Statistical Science, 11(2), 122-136. https://doi.org/10.1214/ss/1038425656
  15. Nair, V. N. (1992), Taguchi's Parameter Design : A Panel Discussion, Technometrics, 34(2), 127-161. https://doi.org/10.1080/00401706.1992.10484904
  16. Nair, V. N. and Pregibon, D. (1986), A Data Analysis Strategy for Quality Engineering Experiments, AT&T Technical Journal, 65(3), 73-84. https://doi.org/10.1002/j.1538-7305.1986.tb00372.x
  17. Nair, V. N., Taam, W., and Ye, K. Q. (2002), Analysis of Functional Responses from Robust Design Studies, Journal of Quality Technology, 34(4), 355-370. https://doi.org/10.1080/00224065.2002.11980169
  18. Nelder, J. A. and Lee, Y. (1991), Generalized Linear Models for Analysis of Taguchi-type Experiments, Journal of Applied Stochastic Models and Data Analysis, 7, 107-120. https://doi.org/10.1002/asm.3150070110
  19. Phadke, M. S. (1989), Quality Engineering Through Robust Design, Prentice-Hall, Eaglewood Cliffs, NJ.
  20. Shoemaker, A. C., Tsui, K. L., and Wu, C. F. J. (1991), Economical Experimentation Methods for Robust Design, Technometrics, 33(4), 415-427. https://doi.org/10.1080/00401706.1991.10484870
  21. Taguchi, G. (1988), Signal-to-Noise Ratios for Quality Assessment, Quality Engineering Series, Volume 3, Japanese Standard Association, Tokyo.
  22. Taguchi, G. and Yano, H. (1994), Lecture on Quality Engineering Applications : Quality Engineering for Technology Development, Japanese Standard Association, Tokyo.
  23. Tsui, K. L. (1999), Modeling and Analysis of Dynamic Robust Design Experiments, IIE Transactions, 31, 1113-1122.
  24. Yum, B. J., Kim, K. S., Lee, P. H., Park, Y G. and Kim, S. J. (1997), Quality Engineering in Semiconductor Manufacturing with Emphasis on Patterning and Thin Film Forming Processes, Industrial Engineering Interfaces, 10(1), 67-77.

피인용 문헌

  1. The Taguchi Robust Design Method : Current Status and Future Directions vol.39, pp.5, 2013, https://doi.org/10.7232/JKIIE.2013.39.5.325
  2. Prediction of Surface Roughness and Optimization of Cutting Parameters of Stainless Steel Turning Based on RSM vol.2018, pp.1563-5147, 2018, https://doi.org/10.1155/2018/9051084