DOI QR코드

DOI QR Code

An Experimental Study on Structural Behaviors of Double Shear Bolted Connections Fabricated with Ferritic Stainless Steel (STS430)

페라이트계 스테인리스강(STS430) 이면전단 볼트접합부의 구조거동에 관한 실험적 연구

  • 김태수 (한밭대학교, 건축공학과) ;
  • 김민성 (형상엔지니어링, 구조설계부)
  • Received : 2013.04.16
  • Accepted : 2013.07.30
  • Published : 2013.10.27

Abstract

Many experimental and numerical researches for thin-walled carbon steel and austenitic stainless steel single shear bolted connections have been conducted and the modified design equations of ultimate strength were proposed. In this study, the tests of double shear bolted connections with bolt arrangements ($2{\times}1$, $2{\times}2$) and end distance parallel to the loading direction as main variables were performed. Specimens were planed with a constant dimension of edge distance perpendicular to the loading direction, bolt diameter, pitch and gauge like single shear bolted connections. The test results such as ultimate strength and fracture mode were compared with those of current design standards. Furthermore, modified block shear equations for double shear bolted connections were suggested.

일면전단 오스테나이트계 스테인리스강 및 탄소강에 관한 많은 실험 및 해석적 연구가 수행되어졌고, 수정된 내력평가식이 제안되었다. 본 연구에서는 볼트배열(2행 1열, 2행 2열)과 하중방향 연단거리를 주요변수로 하여 이면전단 볼트접합부 실험체가 제작되었고, 단순인장실험이 실시되었다. 고정변수로는 하중직각방향 연단거리, 볼트직경, 피치, 게이지를 설정하였다. 최대내력과 파단형태와 같은 실험결과와 현행기준식에 의한 예측결과와 비교 검토되었다. 볼트배열에 따른 블록전단내력평가식이 제안되었다.

Keywords

References

  1. Johnson, A.L. and Winter, G. (1966) Behavior of stainless steel columns and beams, Journal Structural Division, ASCE, Vol. 92, No. 10, pp.97-118.
  2. AISI (1968) Specification for the design of light gage cold-formed stainless steel structural members, AISI.
  3. 임성우, 장인화(2003) 스테인리스 304 강재의 국부좌굴에 관한 연구, 한국강구조학회논문집, 한국강구조학회, 제15권, 제1호, pp.51-57. Im, S.W. and Chang, I.H. (2003) A Study on the Local Buckling Strength of Stainless Steel 304, Journal of Korean Society of Steel Construction, KSSC, Vol. 15, No. 1, pp.51-57 (in Korean).
  4. 이명재, 김희동(2005) 스테인리스 각형강관기둥의 최대 내력, 한국강구조학회논문집, 한국강구조학회, 제17권, 제1호, pp.73-82. Lee, M.J. and Kim, H.D. (2005) The Maximum Strength of Stainless Steel Rectangular Hollow Section Columns and Beam-Columns, Journal of Korean Society of Steel Construction, KSSC, Vol. 17, No. 1, pp.73-82 (in Korean).
  5. Kuwamura, H. and Isozaki, A. (2002) Ultimate Behavior of Fastener Connections of Thin stainless Steel Plates, Journal of Structural and Construction Engineering, Vol. 6, No. 556, pp.159-166.
  6. Kim, T.S. and Kuwamura, H. (2007) Finite element modeling of bolted connections in Thin-walled stainless steel plates under static shear, Thin-walled Structures, Vol. 45, No. 4, pp.407-421. https://doi.org/10.1016/j.tws.2007.03.006
  7. 김민성, 김태수, 김승훈, 이용택(2011) 오스테나이트계 스테인레스강(STS304) 앵글 볼트 접합부의 구조적 거동에 관한 실험적 연구, 한국강구조학회논문집, 한국강구조학회, 제23권, 제1호, pp.29-39. Kim, M.S., Kim, T.S., Kim, S.H., and Lee, Y.T. (2011) An Experimental Study on Structural Behavior of Bolted Angle Connections with Austenitic Stainless Steel, Journal of Korean Society of Steel Construction, KSSC, Vol. 23, No.1, pp.29-39.
  8. 임진성, 김태수, 김승훈, 이용택(2010) 페라이트계 스테인레스강(STS430) 박판 일면전단 볼트접합부의 거동에 관한 실험적 연구, 2010년도 학술대회발표집, 한국강구조학회, pp.219-220. Lim, J.S., KIM, T.S., KIM S.H., and Lee, Y.T. (2010) An Experimental Study on Behavior of Single Shear Bolted Connections with Thin-walled Ferritic Stainless Steel, Proceedings of Annual Conference Korean Society of Steel Construction, KSSC, pp.219-220 (in Korean).
  9. 김지훈, 이용택, 김승훈, 김태수(2012) 페라이트계 스테인레스강 볼트접합부의 연단거리에 대한 변수 해석, 2012년도 추계학술대회논문집, 대한건축학회, 제32권, 제2호, pp.459-460. KIM, J.H., Lee, Y.T., KIM, S.H., and KIM, T.S. (2012) Parametric Analysis on End/Edge distance of Ferritic stainless Bolted Connections, Proceedings of Annual Conference Architectrural Institute of Korea, AIK, Vol. 32, No. 2, pp.459-460 (in Korean).
  10. 김민성, 김태수, 김승훈, 이용택(2010) 페라이트계 스테인레스강(STS430) 박판 볼트접합부의 종국거동에 관한 실험적 연구, 2010년도 추계학술대회논문집, 대한건축학회, 제30권, 제1호, pp.141-142. KIM, M.S., KIM, T.S., KIM, S.H., and Lee, Y.T. (2010) An Experimental Study on Ultimate Behavior of Bolted Connections with Thin-walled Ferritic Stainless Steel, Proceedings of Annual Conference Architectrural Institute of Korea, AIK, Vol. 30, No. 1, pp.141-142 (in Korean).
  11. 대한건축학회(2009) 건축구조기준 및 해설(KBC2009). AIK (2009) Korean Building Code and Commentary, Architecural Institute of Korea (in Korean).
  12. AISC (2001), Manual of Steel Construction-Load and Resistance Factor Design, 3rd edition, American Institute of Steel Construction.
  13. AIJ (2002) Recommendations for Limit State Design of Steel Structures, Architectural Institute of Japan.
  14. AIS (2007) North American Specification for the Design of Cold-Formed Steel Structural Members, AISI S100-07, American Iron and Steel Institute.
  15. ASCE (2002) Specification for the design of coldformed stainless steel structural members. SEI/ASCE-8-02, American Society of Civil Engineers.
  16. 김태수, 김민성, 정하영, 이용택, 김승훈(2010) 탄소강일면전단과 이면전단 볼트접합부의 종국거동의 비교연구, 대한건축학회구조계논문집, 대한건축학회, 제26권, 제4호, pp.31-38. KIM, T.S., KIM, M.S., Lee, Y.T., and KIM, S.H. (2010) Comparative Study on Ultimate Behavior of Single shear and Double Shear Bolted Connections with Thin-walled Carbon Steel, Journal of Architectrural Institute of Korea, AIK, Vol. 26, No. 4, pp.31-38 (in Korean).

Cited by

  1. Ultimate Strength Estimation of Ferritic Stainless Steel Single Shear Bolted Connections Fastened with Four Bolts vol.25, pp.6, 2013, https://doi.org/10.7781/kjoss.2013.25.6.659
  2. 페라이트계 스테인리스강 용접접합부의 모재 블록전단파단에 관한 실험적 연구 vol.28, pp.5, 2013, https://doi.org/10.7781/kjoss.2016.28.5.303
  3. 오스테나이트계 스테인리스강(STS304) 필릿 용접접합부의 모재 블록전단강도에 관한 실험적 연구 vol.33, pp.1, 2013, https://doi.org/10.5659/jaik_sc.2017.33.1.41
  4. 냉간성형 듀플렉스계 스테인리스강(STS329FLD) 용접접합부 모재 블록전단파단 거동 vol.35, pp.4, 2013, https://doi.org/10.5659/jaik_sc.2019.35.4.157
  5. Ultimate Strength of Austentic Stainless Steel (STS304) and Carbon Steel (SS275) Welded Connection vol.33, pp.2, 2013, https://doi.org/10.7781/kjoss.2021.33.2.099