DOI QR코드

DOI QR Code

Nonlinear thermal buckling behavior of functionally graded plates using an efficient sinusoidal shear deformation theory

  • Bouiadjra, Rabbab Bachir (Faculte d'Architecture & de Genie Civil, Departement de Genie Civil, Universite Sciences et de la Technologie d'Oran) ;
  • Bedia, E.A. Adda (Laboratoire des Materiaux et Hydrologie, Faculte de Technologie, Universite de Sidi Bel Abbes) ;
  • Tounsi, Abdelouahed (Laboratoire des Materiaux et Hydrologie, Faculte de Technologie, Universite de Sidi Bel Abbes)
  • 투고 : 2012.08.05
  • 심사 : 2013.10.26
  • 발행 : 2013.11.25

초록

Nonlinear behavior of functionally graded material (FGM) plates under thermal loads is investigated here using an efficient sinusoidal shear deformation theory. The displacement field is chosen based on assumptions that the in-plane and transverse displacements consist of bending and shear components, and the shear components of in-plane displacements give rise to the sinusoidal distribution of transverse shear stress through the thickness in such a way that shear stresses vanish on the plate surfaces. Therefore, there is no need to use shear correction factor. Unlike the conventional sinusoidal shear deformation theory, the proposed efficient sinusoidal shear deformation theory contains only four unknowns. The material is graded in the thickness direction and a simple power law based on the rule of mixture is used to estimate the effective material properties. The neutral surface position for such FGM plates is determined and the sinusoidal shear deformation theory based on exact neutral surface position is employed here. There is no stretching-bending coupling effect in the neutral surface-based formulation, and consequently, the governing equations and boundary conditions of functionally graded plates based on neutral surface have the simple forms as those of isotropic plates. The non-linear strain-displacement relations are also taken into consideration. The thermal loads are assumed as uniform, linear and non-linear temperature rises across the thickness direction. Closed-form solutions are presented to calculate the critical buckling temperature, which are useful for engineers in design. Numerical results are presented for the present efficient sinusoidal shear deformation theory, demonstrating its importance and accuracy in comparison to other theories.

키워드

참고문헌

  1. Abrate, S. (2008), "Functionally graded plates behave like homogeneous plates", Composites Part B: Engineering, 39(1), 151-158. https://doi.org/10.1016/j.compositesb.2007.02.026
  2. Bodaghi, M. and Saidi, A.R. (2011), "Thermoelastic buckling behavior of thick functionally graded rectangular plates", Archive of Applied Mechanics, 81, 1555-1572. https://doi.org/10.1007/s00419-010-0501-0
  3. Bouazza, M., Tounsi, A., Adda-Bedia, E.A. and Megueni, A. (2010), "Thermoelastic stability analysis of functionally graded plates: An analytical approach", Computational Materials Science, 49, 865-870. https://doi.org/10.1016/j.commatsci.2010.06.038
  4. Bouremana, M., Houari, M.S.A., Tounsi, A., Kaci, A. and Adda Bedia, E.A. (2013), "A new first shear deformation beam theory based on neutral surface position for functionally graded beams", Steel and Composite Structures. (in press)
  5. Bousahla, A.A., Houari, M.S.A., Tounsi, A. and Adda Bedia, E.A. (2013), "A novel higher order shear and normal deformation theory based on neutral surface position for bending analysis of advanced composite plates", International Journal of Computational Methods. (in press)
  6. Curiel Sosa, J.L., Anwar Beg, O. and Liebana Murillo, J.M. (2013), "Finite element analysis of structural instability using a switching implicit-explicit technique", Int. J. Comp. Methods Eng. Sci. Mechanics. (in press)
  7. Ganapathi, M. (2006), "Thermal buckling of simply supported functionally graded skew plates", Composite Structures, 74, 247-50. https://doi.org/10.1016/j.compstruct.2005.04.004
  8. Ibrahim, H.H., Tawfik, M. and Al-Ajmi, M. (2007), "Thermal buckling and nonlinear flutter behavior of functionally graded material panels", Journal Aircraft, 44, 1610-8. https://doi.org/10.2514/1.27866
  9. Javaheri, R. and Eslami, M.R. (2002a), "Thermal buckling of functionally graded plates", AIAA Journal, 40, 162-9. https://doi.org/10.2514/2.1626
  10. Javaheri, R. and Eslami, M.R. (2002b), "Thermal buckling of functionally graded plates based on higher order theory", J. Therm. Stress., 25(1), 603-625. https://doi.org/10.1080/01495730290074333
  11. Kazerouni, S.M., Saidi, A.R. and Mohammadi, M. (2010), "Buckling Analysis of Thin Functionally graded Rectangulare Plates with Two Opposite Edges Simply Supported", International Journal of Engineering Transactions B: Applications, 23, 179-192.
  12. Kettaf, F.Z., Houari, M.S.A., Benguediab, M. and Tounsi, A. (2013), "Thermal buckling of functionally graded sandwich plates using a new hyperbolic shear displacement model", Steel and Composite Structures, 15(4), 399-423. https://doi.org/10.12989/scs.2013.15.4.399
  13. Khalfi, Y., Houari, M.S.A. and Tounsi, A. (2013), "A refined and simple shear deformation theory for thermal buckling of solar functionally graded plates on elastic foundation", International Journal of Computational Methods. (in press)
  14. Lanhe, W. (2004), "Thermal buckling of a simply supported moderately thick rectangular FGM plate", Composite Structures, 64, 211-218. https://doi.org/10.1016/j.compstruct.2003.08.004
  15. Matsunaga, H. (2009), "Thermal buckling of functionally graded plates according to a 2D higher-order deformation theory", Composite Structures, 90, 76-86. https://doi.org/10.1016/j.compstruct.2009.02.004
  16. Morimoto, T., Tanigawa, Y. and Kawamura, R. (2006), "Thermal buckling of functionally graded rectangular plates subjected to partial heating", International Journal of Mechanical Sciences, 48(9), 926-37. https://doi.org/10.1016/j.ijmecsci.2006.03.015
  17. Na, K.S. and Kim, J.H. (2004), "Three-dimensional thermal buckling analysis of functionally graded materials", Composites Part B, 35, 429-37. https://doi.org/10.1016/j.compositesb.2003.11.013
  18. Najafizadeh, M.M. and Heydaru, H.R. (2004), "Thermal buckling of functionally graded circular plates based on higher order shear deformation plate theory", European Journal of Mechanics A/Solids, 23, 1085-100. https://doi.org/10.1016/j.euromechsol.2004.08.004
  19. Ould Larbi, L., Kaci, A., Houari, M.S.A. and Tounsi, A. (2013), "An efficient shear deformation beam theory based on neutral surface position for bending and free vibration of functionally graded beams", Mechanics Based Design of Structures and Machines, 41, 421-433. https://doi.org/10.1080/15397734.2013.763713
  20. Rashidi, M.M., Shooshtari, A. and Anwar Beg, O. (2012), "Homotopy perturbation study of nonlinear vibration of Von Karman rectangular plates", Computers and Structures, 106/107, 46-55. https://doi.org/10.1016/j.compstruc.2012.04.004
  21. Saidi, A.R. and Jomehzadeh, E. (2009), "On analytical approach for the bending/stretching of linearly elastic functionally graded rectangular plates with two opposite edges simply supported", Proc. IMechE, Part C: Journal of Mechanical Engineering Science, 223, 2009-2016. https://doi.org/10.1243/09544062JMES1431
  22. Shariat, BAS., Eslami, M.R. (2005), "Effect of initial imperfections on thermal buckling of functionally graded plates", Journal of Thermal Stresses, 28, 1183-98. https://doi.org/10.1080/014957390967884
  23. Sohn, K.J. and Kim, J.H. (2008), "Structural stability of functionally graded panels subjected to aero-thermal loads", Composite Structures, 82, 317-25. https://doi.org/10.1016/j.compstruct.2007.07.010
  24. Suresh, S. and Mortensen, A. (1998), Fundamentals of Functionally Graded Materials, IOM Communications Ltd., London.
  25. Yaghoobi, H. and Feraidoon, A. (2010), "Influence of neutral surface position on deflection of functionally graded beam under uniformly distributed load", World Applied Sciences Journal, 10(3), 337-341. https://doi.org/10.3923/jas.2010.337.342
  26. Zenkour, A.M. and Mashat, D.S. (2010), "Thermal buckling analysis of ceramic-metal functionally graded plates", Natural Sciences, 2, 968-978.
  27. Zhang, D.G. and Zhou, Y.H. (2008), "A theoretical analysis of FGM thin plates based on physical neutral surface", Computational Materials Science, 44, 716-720.

피인용 문헌

  1. Static bending and free vibration of FGM beam using an exponential shear deformation theory vol.4, pp.1, 2015, https://doi.org/10.12989/csm.2015.4.1.099
  2. A new higher order shear deformation model for functionally graded beams vol.20, pp.5, 2016, https://doi.org/10.1007/s12205-015-0252-0
  3. A new higher-order shear and normal deformation theory for functionally graded sandwich beams vol.19, pp.3, 2015, https://doi.org/10.12989/scs.2015.19.3.521
  4. A four-variable plate theory for thermal vibration of embedded FG nanoplates under non-uniform temperature distributions with different boundary conditions vol.60, pp.4, 2016, https://doi.org/10.12989/sem.2016.60.4.707
  5. A mechanical response of functionally graded nanoscale beam: an assessment of a refined nonlocal shear deformation theory beam theory vol.54, pp.4, 2015, https://doi.org/10.12989/sem.2015.54.4.693
  6. A new simple shear and normal deformations theory for functionally graded beams vol.18, pp.2, 2015, https://doi.org/10.12989/scs.2015.18.2.409
  7. A new higher order shear and normal deformation theory for functionally graded beams vol.18, pp.3, 2015, https://doi.org/10.12989/scs.2015.18.3.793
  8. A sinusoidal plate theory with 5-unknowns and stretching effect for thermomechanical bending of functionally graded sandwich plates vol.18, pp.1, 2015, https://doi.org/10.12989/scs.2015.18.1.235
  9. On vibration properties of functionally graded nano-plate using a new nonlocal refined four variable model vol.18, pp.4, 2015, https://doi.org/10.12989/scs.2015.18.4.1063
  10. A new hyperbolic shear deformation plate theory for static analysis of FGM plate based on neutral surface position vol.8, pp.3, 2015, https://doi.org/10.12989/gae.2015.8.3.305
  11. A new simple three-unknown sinusoidal shear deformation theory for functionally graded plates vol.22, pp.2, 2016, https://doi.org/10.12989/scs.2016.22.2.257
  12. Thermal buckling analysis of FG plates resting on elastic foundation based on an efficient and simple trigonometric shear deformation theory vol.18, pp.2, 2015, https://doi.org/10.12989/scs.2015.18.2.443
  13. Buckling analysis of isotropic and orthotropic plates using a novel four variable refined plate theory vol.21, pp.6, 2016, https://doi.org/10.12989/scs.2016.21.6.1287
  14. Thermal Buckling Response of Functionally Graded Plates with Clamped Boundary Conditions vol.38, pp.6, 2015, https://doi.org/10.1080/01495739.2015.1015900
  15. A computational shear displacement model for vibrational analysis of functionally graded beams with porosities vol.19, pp.2, 2015, https://doi.org/10.12989/scs.2015.19.2.369
  16. Thermal post-buckling behavior of imperfect temperature-dependent sandwich FGM plates resting on Pasternak elastic foundation vol.22, pp.1, 2016, https://doi.org/10.12989/scs.2016.22.1.091
  17. Hygrothermal analysis of a rotating smart exponentially graded cylindrical shell with imperfect bonding supported by an elastic foundation vol.43, 2015, https://doi.org/10.1016/j.ast.2015.02.012
  18. Post-Buckling Analysis of Axially Functionally Graded Three-Dimensional Beams vol.07, pp.03, 2015, https://doi.org/10.1142/S1758825115500477
  19. Thermo-mechanical post-buckling behavior of thick functionally graded plates resting on elastic foundations vol.56, pp.1, 2015, https://doi.org/10.12989/sem.2015.56.1.085
  20. Nonlinear static and vibration analysis of Euler-Bernoulli composite beam model reinforced by FG-SWCNT with initial geometrical imperfection using FEM vol.59, pp.3, 2016, https://doi.org/10.12989/sem.2016.59.3.431
  21. A new 3-unknowns non-polynomial plate theory for buckling and vibration of functionally graded sandwich plate vol.60, pp.4, 2016, https://doi.org/10.12989/sem.2016.60.4.547
  22. Thermomechanical effects on the bending of antisymmetric cross-ply composite plates using a four variable sinusoidal theory vol.19, pp.1, 2015, https://doi.org/10.12989/scs.2015.19.1.093
  23. Analytical study of buckling profile web stability vol.53, pp.1, 2015, https://doi.org/10.12989/sem.2015.53.1.147
  24. Thermal stresses and deflections of functionally graded sandwich plates using a new refined hyperbolic shear deformation theory vol.18, pp.6, 2015, https://doi.org/10.12989/scs.2015.18.6.1493
  25. Vibration analysis of orthotropic circular and elliptical nano-plates embedded in elastic medium based on nonlocal Mindlin plate theory and using Galerkin method vol.30, pp.6, 2016, https://doi.org/10.1007/s12206-016-0506-x
  26. A refined theory with stretching effect for the flexure analysis of laminated composite plates vol.11, pp.5, 2016, https://doi.org/10.12989/gae.2016.11.5.671
  27. Effect of the rotation on a non-homogeneous infinite cylinder of orthotropic material with external magnetic field vol.54, pp.1, 2015, https://doi.org/10.12989/sem.2015.54.1.135
  28. Thermal buckling analysis of functionally graded sandwich plates vol.41, pp.2, 2018, https://doi.org/10.1080/01495739.2017.1393644
  29. Design and analysis of a smart graded fiber-reinforced composite laminated plate vol.124, 2015, https://doi.org/10.1016/j.compstruct.2014.11.015
  30. A simple shear deformation theory based on neutral surface position for functionally graded plates resting on Pasternak elastic foundations vol.53, pp.6, 2015, https://doi.org/10.12989/sem.2015.53.6.1215
  31. A simple shear deformation theory for thermo-mechanical behaviour of functionally graded sandwich plates on elastic foundations vol.17, pp.2, 2015, https://doi.org/10.1177/1099636214554904
  32. Space robot active collision avoidance maneuver under thruster failure vol.67, 2017, https://doi.org/10.1016/j.ast.2017.03.037
  33. Free vibration of functionally graded thin elliptic plates with various edge supports vol.53, pp.2, 2015, https://doi.org/10.12989/sem.2015.53.2.337
  34. Postbuckling analysis of laminated composite shells under shear loads vol.21, pp.2, 2016, https://doi.org/10.12989/scs.2016.21.2.373
  35. Bending and buckling analyses of functionally graded material (FGM) size-dependent nanoscale beams including the thickness stretching effect vol.18, pp.2, 2015, https://doi.org/10.12989/scs.2015.18.2.425
  36. Analytical solution for bending analysis of functionally graded beam vol.19, pp.4, 2015, https://doi.org/10.12989/scs.2015.19.4.829
  37. Free vibration analysis of a rotating non-uniform functionally graded beam vol.19, pp.5, 2015, https://doi.org/10.12989/scs.2015.19.5.1279
  38. Effect of porosity on vibrational characteristics of non-homogeneous plates using hyperbolic shear deformation theory vol.22, pp.4, 2016, https://doi.org/10.12989/was.2016.22.4.429
  39. Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories vol.53, pp.6, 2015, https://doi.org/10.12989/sem.2015.53.6.1143
  40. On thermal stability of plates with functionally graded coefficient of thermal expansion vol.60, pp.2, 2016, https://doi.org/10.12989/sem.2016.60.2.313
  41. Flexure of power law governed functionally graded plates using ABAQUS UMAT vol.46, 2015, https://doi.org/10.1016/j.ast.2015.06.021
  42. Nonlinear dynamic response and vibration of shear deformable imperfect eccentrically stiffened S-FGM circular cylindrical shells surrounded on elastic foundations vol.40, 2015, https://doi.org/10.1016/j.ast.2014.11.005
  43. Generalized two-variable plate theory for multi-layered graphene sheets with arbitrary boundary conditions vol.225, pp.9, 2014, https://doi.org/10.1007/s00707-014-1093-5
  44. A novel quasi-3D hyperbolic shear deformation theory for functionally graded thick rectangular plates on elastic foundation vol.12, pp.1, 2013, https://doi.org/10.12989/gae.2017.12.1.009
  45. Rotating effects on hygro-mechanical vibration analysis of FG beams based on Euler-Bernoulli beam theory vol.63, pp.4, 2013, https://doi.org/10.12989/sem.2017.63.4.471
  46. A simple analytical approach for thermal buckling of thick functionally graded sandwich plates vol.63, pp.5, 2013, https://doi.org/10.12989/sem.2017.63.5.585
  47. A four variable refined nth-order shear deformation theory for mechanical and thermal buckling analysis of functionally graded plates vol.13, pp.3, 2013, https://doi.org/10.12989/gae.2017.13.3.385
  48. A new nonlocal trigonometric shear deformation theory for thermal buckling analysis of embedded nanosize FG plates vol.64, pp.4, 2013, https://doi.org/10.12989/sem.2017.64.4.391
  49. The role of micromechanical models in the mechanical response of elastic foundation FG sandwich thick beams vol.68, pp.1, 2018, https://doi.org/10.12989/sem.2018.68.1.053
  50. Assessing the Effects of Porosity on the Bending, Buckling, and Vibrations of Functionally Graded Beams Resting on an Elastic Foundation by Using a New Refined Quasi-3D Theory vol.55, pp.2, 2013, https://doi.org/10.1007/s11029-019-09805-0
  51. Investigation on thermal buckling of porous FG plate resting on elastic foundation via quasi 3D solution vol.72, pp.4, 2013, https://doi.org/10.12989/sem.2019.72.4.513
  52. Buckling of carbon nanotube reinforced composite plates supported by Kerr foundation using Hamilton's energy principle vol.73, pp.2, 2013, https://doi.org/10.12989/sem.2020.73.2.209
  53. Buckling response of functionally graded nanoplates under combined thermal and mechanical loadings vol.22, pp.4, 2020, https://doi.org/10.1007/s11051-020-04815-9
  54. Thermal buckling of functionally graded cylindrical shells with temperature-dependent elastoplastic properties vol.32, pp.5, 2013, https://doi.org/10.1007/s00161-019-00854-3