DOI QR코드

DOI QR Code

SiCf/SiC 복합체 튜브의 표면조도 및 섬유 부피 분율에 미치는 필라멘트 와인딩 방법의 영향

Effect of Filament Winding Methods on Surface Roughness and Fiber Volume Fraction of SiCf/SiC Composite Tubes

  • 김대종 (한국원자력연구원 원자력재료개발부) ;
  • 이종민 (한국원자력연구원 원자력재료개발부) ;
  • 박지연 (한국원자력연구원 원자력재료개발부) ;
  • 김원주 (한국원자력연구원 원자력재료개발부)
  • Kim, Daejong (Nuclear Materials Division, Korea Atomic Energy Research Institute) ;
  • Lee, Jongmin (Nuclear Materials Division, Korea Atomic Energy Research Institute) ;
  • Park, Ji Yeon (Nuclear Materials Division, Korea Atomic Energy Research Institute) ;
  • Kim, Weon-Ju (Nuclear Materials Division, Korea Atomic Energy Research Institute)
  • 투고 : 2013.09.13
  • 심사 : 2013.11.15
  • 발행 : 2013.11.30

초록

Silicon carbide and its composites are being considered as a nuclear fuel cladding material for LWR nuclear reactors because they have a low neutron absorption cross section, low hydrogen production under accident conditions, and high strength at high temperatures. The SiC composite cladding tube considered in this study consists of three layers, monolith CVD SiC - $SiC_f$/SiC composite -monolith CVD SiC. The volume fraction of SiC fiber and surface roughness of the composite layer affect mechanical and corrosion properties of the cladding tube. In this study, various types of SiC fiber preforms with tubular shapes were fabricated by a filament winding method using two types of Tyranno SA3 grade SiC fibers with 800 filaments/yarn and 1600 filaments/yarn. After chemical vapor infiltration of the SiC matrix, the surface roughness and fiber volume fraction were measured. As filament counts were changed from 800 to 1600, the surface roughness increased but the fiber volume fraction decreased. The $SiC_f$/SiC composite with a bamboo-like winding pattern has a smaller surface roughness and a higher fiber volume fraction than that with a zigzag winding pattern.

키워드

참고문헌

  1. K. Yueh, D. Carpenter, and H. Feinroth, "Clad in Clay," Nucl. Eng. Int., 55 14-16 (2010).
  2. W.-J. Kim, D. Kim, and J. Y. Park, "Fabrication and Material Issues for the Application of SiC Composites to LWR Fuel Cladding," Nucl. Eng. Technol., 45 [4] 565-72 (2013). https://doi.org/10.5516/NET.07.2012.084
  3. W.-J. Kim, S. M. Kang, K. H. Park, A. Kohyama, W. -S. Ryu, and J.Y. Park, "Fabrication and Ion Irradiation Characteristics of SiC-Based Ceramics for Advanced Nuclear Energy Systems (in Korean)," J. Kor. Ceram. Soc., 42 [8] 575-81 (2005). https://doi.org/10.4191/KCERS.2005.42.8.575
  4. C. R. F. Azevedo, "Selection of Fuel Cladding Material for Nuclear Fission Reactors," Eng. Failure Anal., 18 [8] 1943-62 (2011). https://doi.org/10.1016/j.engfailanal.2011.06.010
  5. D. Kim, J. Lee, W.-J. Kim, S.G. Yoon, and J.Y. Park, "Deposition of ${\beta}$-SiC by a LPCVD Method and the Effect of the Crystallographic Orientation on Mechanical Properties (in Korean)," J. Kor. Ceram. Soc., 50 [1] 43-49 (2013). https://doi.org/10.4191/kcers.2013.50.1.43
  6. H. Feinroth, M. Ales, E. Barringer, G. Kohse, D. Carpenter, and R. Jaramillo, "Mechanical Strength of CTP Triplex SiC Fuel Clad Tubes after Irradiation in MIT Research Reactor under PWR Coolant Conditions"; pp. 47-58 in Silicon Carbide and Carbon Composites, Vol. 30, Ceramic Engineering and Science Proceeding, Ed. by Y. Katoh and A. Cozzi, John Wiley & Sons, New Jersey, 2009.
  7. Y. Katoh, T. Nozawa, L. L. Snead, K. Ozawa, and H. Tanigawa, "Stability of SiC and Its Composites at High Neutron Fluence," J. Nucl. Mater., 417 [1-3] 400-05 (2011). https://doi.org/10.1016/j.jnucmat.2010.12.088
  8. D. Shaw-Stewart, "Filament Winding - Materials & Engineering," Mater. Des., 6 [3] 140-44 (1985). https://doi.org/10.1016/0261-3069(85)90063-9
  9. C. Ayranci and J. Carey, "2D Braided Composites: A Review for Stiffness Critical Applications," Compos. Struct., 85 [1] 43-58 (2008). https://doi.org/10.1016/j.compstruct.2007.10.004
  10. M. Lossie and H.V. Brussel, "Design Principles in Filament Winding," Compos. Manuf., 5 [1] 5-13 (1994). https://doi.org/10.1016/0956-7143(94)90014-0
  11. P. D. Soden, R. Kitching, P. C. Tse, and Y. Tsavalas, "Influence of Winding Angle on the Strength and Deformation of Filament-Wound Composite Tubes to Uniaxial and Biaxial Load," Compos. Sci. Technol., 46 [4] 363-78 (1993). https://doi.org/10.1016/0266-3538(93)90182-G

피인용 문헌

  1. /SiC Composites by X-Ray Computed Microtomography vol.50, pp.6, 2013, https://doi.org/10.4191/kcers.2013.50.6.378
  2. /SiC Composites vol.51, pp.5, 2014, https://doi.org/10.4191/kcers.2014.51.5.453
  3. Development Status of Accident-tolerant Fuel for Light Water Reactors in Korea vol.48, pp.1, 2016, https://doi.org/10.1016/j.net.2015.11.011