DOI QR코드

DOI QR Code

Development of Smart-phone based Thermal Imaging Diagnostic System for Monitoring Disc Pads of Crane

크레인 디스크 패드 모니터링을 위한 스마트폰 기반의 열영상 진단 시스템 개발

  • 오연재 (순천대학교 컴퓨터과학과) ;
  • 박경욱 (전남대학교 문화콘텐츠학부) ;
  • 김응곤 (순천대학교 컴퓨터과학과)
  • Received : 2014.11.17
  • Accepted : 2014.12.15
  • Published : 2014.12.31

Abstract

Grab cranes are used for multi-purpose when the sand and soil are deposited into harbor wharf or the undersea construction is performed. Among the components of crane grab, the wire drum and disc brake pad are key expendables and have disadvantages that lot of heat is generated and very expensive when replacing them. In this study, the thermal image analysis for the disc brake, which works with wire drum of the crane is suggested. The suggested system performs the pad thermal diagnosis through the thermal image using the characteristics that the disc and pad surface temperatures are distributed abnormally before the brake failure and the disc pad damage. Therefore, the damage by the failure can be prevented by discovering the abnormality of the machine parts before failure and the life cycle of the pad and the cost can be extended and saved by operating the crane performing constant checkup for the overload.

그랩 크레인은 부두 항만으로 모래 및 토사가 퇴적이 되거나, 해저 공사를 하기 위해 다목적으로 사용된다. 그립 크레인의 구성 요소 중 와이어 드럼과 디스크 브레이크 패드는 핵심적인 소모품으로 많은 열이 발생되며 교체 시 가격이 매우 비싸다는 단점이 있다. 본 논문에서는 그랩 크레인의 와이어 드럼에 작용되는 디스크 브레이크 패드에 대한 열화상 진단 시스템을 제안한다. 제안된 시스템은 브레이크 고장 및 디스크 패드 손상 전에 디스크 및 패드 표면의 온도가 비정상적으로 분포하는 특징을 이용하여 열화상을 통해 패드 열 진단 분석을 수행한다. 따라서 기계 부품의 이상을 고장 전에 미리 발견하여 고장으로 인한 피해를 방지할 수 있으며, 과부하 유무를 상시체크하면서 크레인을 작동시켜 패드의 수명 연장과 비용을 절감할 수 있다.

Keywords

References

  1. S.-H. Choi, T.-Y. Ha, and S. Won, "A Study on the Establishment of the Technology Road Map for Container Ports in Korea," J. of Navigation and Port Research, vol. 33, no. 3, 2009, pp. 199-206. https://doi.org/10.5394/KINPR.2009.33.3.199
  2. Y.-S. Lee and Y.-J. Ahn, "A Study on the Standard Ship"s Length of Domestic Trade Port," J. of the Korean Society of Marine Environment & Safety, vol. 19, no. 2, 2013, pp. 164-170. https://doi.org/10.7837/kosomes.2013.19.2.164
  3. K.-Y. Jeong and E.-K. Kim, "Image Guidance System for Working with Abalone Park," J. of the Korea Institute of Electronic Communication Sciences, vol. 9, no. 3, 2014, pp. 369-376. https://doi.org/10.13067/JKIECS.2014.9.3.369
  4. N.-K. Ku, S. Ha, K.-S. Kim, and M.-I. Roh, "Installation Analysis of Multibody Systems Dynamics of an Offshore Wind Turbine Using an Offshore Floating Crane," J. of the Computational Structural Engineering Institute of Korea, vol. 26, no. 4, 2013, pp. 233-239. https://doi.org/10.7734/COSEIK.2013.26.4.233
  5. D. Kim, D. Hong, C. Yu, and W. Kim, "The utilization of nondestructive testing and defects diagnosis using infrared thermography," J. of the Korean Society for Nondestructive Testing, vol. 24, no. 5, 2004, pp. 525-531.
  6. D. Kim, D. Hong, C. Yu, and W. Kim, "Concdtion Monitoring under In-situ Lubrication Status of Bearing Using Infrnred Thennography," J. of the Korean Society for Nondestnκtive Testing, vol. 30, no. 2, 2010, pp. 121-125.
  7. S.-S. Hwang and Y.-C. Bae, "Diagnosis of power supply using time-series of infrared camera," J. of the Korea Institute of Electronic communication Sciences, vol. 7, no. 6, 2012, pp. 144-147.
  8. K.-W. Yun, D.-L. Kim, and H.-C. Jung, "Application Defects Detection in the Small-Bore Pipe Using Infrared Thermography Technique," J. of the Korean Society for Nondestructive Testing, vol. 33, no. 1, 2013, pp. 34-39. https://doi.org/10.7779/JKSNT.2013.33.1.34
  9. D.-P. Hong, H.-J. Kim, and W.-T. Kim, "On Diagnosis Measurement under Dynamic Loading of Ball Bearing using Numerical Thermal Analysis and Infrared Thermography," J. of the Korean Society for Nondestructive Testing, vol. 33, no. 4, 2013, pp. 354-359. https://doi.org/10.7779/JKSNT.2013.33.4.355
  10. B. Jeon, T. Kim, S. Kim, Y. Mo, and W. Kim, "Panorama Image Processing for Condition Monitoring with Thermography in Power Plant," J. of the Korean Society for Nondestructive Testing, vol. 30, no. 2, 2010, pp. 98-103.