DOI QR코드

DOI QR Code

Evaluation of Vibration and Structural Performance of an Innovative Sliding Step Steel Stair Using Full-Scale Mock-up Test

실물대 목업실험에 의한 슬라이딩스텝 철골계단의 진동 및 구조성능 평가

  • Kim, Sung Yong (Dept. of Architecture and Architectural Engineering, Seoul National University) ;
  • Lee, Cheol Ho (Dept. of Architecture and Architectural Engineering, Seoul National University) ;
  • Kim, Na Eun (Dept. of Architecture and Architectural Engineering, Seoul National University) ;
  • Cho, Sung Sang (Taeyoung E&C) ;
  • Chung, Woon Ok (Sun Woo Eng Co. Ltd.)
  • Received : 2014.06.24
  • Accepted : 2014.08.11
  • Published : 2014.12.27

Abstract

In this study, an innovative steel stair system is presented which enables rapid erection and high quality control in both residential and office building construction. This system features two lightweight steel stringers of box shape, bolted connections easy to absorb construction tolerance, and stair steps movable transversely (or sliding steps) such that the work space needed for concrete stairway wall could be easily provided. In this type of stairway system, other than providing robust connecting details, ensuring vibration performance is especially important since this system may be vibration-sensitive due to lightweight nature and/or probable low damping. To tackle these issues, a series of full-scale mock-up tests were conducted by using box-shape stringer members with or without concrete-fill. The connection system was shown to be sufficiently stiff and strong, or it remained elastic even under the 160% of service load level. Among the seven stringer alternatives, five exhibited satisfactory vibration performance according to the related North American and European acceptance criteria.

본 연구에서는 주거용 및 사무용 계단시공의 작업공정의 단순화 및 시공품질 향상을 목적으로 개발된 혁신적인 계단 시스템인 슬라이딩스텝 철골계단의 진동 및 구조성능 평가를 수행하였다. 슬라이딩스텝 철골계단은 각형 강재 스트링거와 시공오차를 흡수할 수 있도록 설계된 스트링거 연결재 및 계단벽체 시공이 용이하도록 벽체 반대방향으로 이동이 가능한 슬라이딩 스텝으로 구성되어 있다. 하지만 철골계단의 경우 철골 접합부의 구조적 안전성 확보와 더불어, 비교적 경량에 저감쇠인 철골재 사용으로 인한 낮은 진동성능이 발현될 수 있기 때문에 진동성능에 대한 확보를 파악하는 것이 필수적으로 요구된다. 이에 본 연구에서는 진동성능 및 구조적 안전성 확보여부를 파악하기 위해 실물대 목업실험을 실시하였다. 진동성능 및 중량으로 인한 경제성 등을 종합적으로 판단하기 위해 콘크리트를 채운 스트링거와 콘크리트를 채우지 않은 스트링거를 교체해가며 각 경우에 대한 주거용 및 사무용 계단의 진동성능을 평가하였다. 또한 각 용도별로 한 개의 계단을 선정한 후, 재하실험을 통해 철골 접합부의 구조적 안전성과 스트링거 중앙부의 잔류 처짐 및 사용성 검토를 수행하였다. 실물대목업실험 결과 접합부 시스템의 경우 사용하중의 160%인 극한하중에 대해서도 탄성상태를 유지하며 재하실험 후에도 어떠한 균열이나 이상이 발견되지 않는 등 충분한 강성과 강도를 확보하고 있음을 확인하였다. 또한 스트링거 중앙부 처짐은 주거용/사무용 계단 모두 역시 동일한 하중조건 하에서 사용성에 문제가 없을 정도의 미미한 수준의 최대처짐과 잔류처짐이 발생하였으며, 최대하중이 가해질 때까지 스트링거가 탄성상태를 유지하는 등 설계하중을 지지할 수 있는 충분한 내력을 보유한 것으로 평가되었다. 진동성능 검토 결과 총 일곱 개의 스트링거 타입 중 다섯 개의 타입이 북미기준와 유럽기준에서 제시하는 기준의 허용치를 만족함을 확인하였다.

Keywords

References

  1. Chopra, A.K. (1995) Dynamics of Structures : Theory and Applications to Earthquake Engineering, Vol.3, Prentice Hall, New Jersey.
  2. Middleton, C.J. and Brownjohn, J.M.W. (2010) Response of High Frequency Floors : A Literature Review, Engineering Structures, Vol.32, No.2, pp.337-352. https://doi.org/10.1016/j.engstruct.2009.11.003
  3. Kerr, S.C. and Bishop, N.W.M. (2001) Human Induced Loading on Flexible Staircases, Engineering Structures, ELSEVIER, Vol.23, No.1, pp.37-45. https://doi.org/10.1016/S0141-0296(00)00020-1
  4. Bishop, N.W.M., Willford, M., and Pumphrey, R. (1995) Human Induced Loading of Flexible Staircases, Safety Science, ELSEVIER, Vol.18, No.4, pp.261-276. https://doi.org/10.1016/0925-7535(94)00035-2
  5. Murray, T.M., Allen, D.E., and Ungar, E.E. (1997) Floor Vibrations Due to Human Activity, American Institute of Steel Construction.
  6. Smith, A.L., Hicks, S.J., and Devine, P.J. (2007) Design of Floors for Vibration: A New Approach, The Steel Construction Institute.
  7. ISO (1997) Mechanical Vibration and Shock: Evaluation of Human Exposure to Whole-body Vibration. Part 1, General Requirements: International Standard ISO 2631-1:1997(E), ISO.
  8. Eriksson, P.E. (1994) Vibration of Low-Frequency Floors-Dynamic Forces and Response Prediction, Chalmers University of Technology.