한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제23권6호
  • /
  • Pages.561-568
  • /
  • 2014
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

냉장고용 선반 패밀리금형의 유동 밸런스와 클램프힘 개선에 관한 연구

Study on Improving Flow Balance and Clamp Force of Family Mold for Refrigerator Shelf

  • Park, Je-Hong (Department of Mechanical Engineering, Gyeongsang National University) ;
  • Yoon, Kyeong-Won (Taesung Precision Co., LTD.) ;
  • Ko, Chang-Oh (Taesung Precision Co., LTD.) ;
  • Seo, Sang-Won (Department of Mechanical Engineering, Gyeongsang National University) ;
  • Kim, Su-Jin (Department of Mechanical Engineering, Gyeongsang National University)
  • 투고 : 2014.09.12
  • 심사 : 2014.11.04
  • 발행 : 2014.12.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Injection molding industries realize the necessity of developing family molds to improve competitiveness. One of the primary causes of manufacturing defective products is the imbalance of flow in a family mold. In this study, the family mold of a shelf for refrigerators is analyzed by using CAE software. First, the flow balance, clamping force, and injection pressure are analyzed for different gate diameters of two cavities. Second, the flow balance, clamping force, and injection pressure are improved when the two gate valves are open at different times. Finally, the results of filling analysis are compared with the test injection product.

키워드

참고문헌

  1. Choi, K. I., Park, P. P., Cha, B. S., Rhee, B. O., Koo, B. H., 2007, A Theoretical Study for the Filling Balance of the Family Mould Using Variable-Runner System, The Korean Society For Technology of Plasticity 275-278.
  2. Chan, W. M., Pinforld, M., Kwong, C. K., Szeto., W. H., 2014, Automation and Optimization of Family Mould Cavity and Runner Layout Design (FMCRLD) using Genetic Algorithms and Mould Layout Design Grammars, Computer-Aided Design 47 118-133. https://doi.org/10.1016/j.cad.2013.10.006
  3. Malloy, R. A., 2003, Plastic Part Design for Injection Molding, Hanser, 40-43.
  4. Kim, M. Y., Kim, K. H., Song, D. J., Kwon, C. O., Lee, S. H., Heo, Y. M., 2005, A Study on Flow Balance and Warpage Characteristics in Manufacturing of Plastic Injection Family Mould, The Korean Society for Technology of Plasticity Symposium 141-146.
  5. Park, C. J., Lee, G. S., Choi, S. I., Kang, J. H., 2013, Optimization of Gate Location for Melt Flow Balancing in Injection Mold Cavity by using Recursive Design Area Reduction Method, Journal of the Korean Society of Manufacturing Process Engineers 12:4 114-122.
  6. Park, C. H., Pyo, B. G., Choi, D. H., 2012, Design Automation of Valve Gate Locations and Open Timing for Injection Molding of an Automotive Instrument Panel, 8th IEEE International Conference on Automation Science and Engineering 843-845.