DOI QR코드

DOI QR Code

Damage Detection in High-Rise Buildings Using Damage-Induced Rotations

  • Sung, Seung Hun (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) ;
  • Jung, Ho Youn (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) ;
  • Lee, Jung Hoon (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) ;
  • Jung, Hyung Jo (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology)
  • Received : 2014.11.13
  • Accepted : 2014.12.18
  • Published : 2014.12.30

Abstract

In this paper, a new damage-detection method based on structural vibration is proposed. The essence of the proposed method is the detection of abrupt changes in rotation. Damage-induced rotation (DIR), which is determined from the modal flexibility of the structure, initially occurs only at a specific damaged location. Therefore, damage can be localized by evaluating abrupt changes in rotation. We conducted numerical simulations of two damage scenarios using a 10-story cantilever-type building model. Measurement noise was also considered in the simulation. We compared the sensitivity of the proposed method to localize damage to that of two conventional modal-flexibility-based damage-detection methods, i.e., uniform load surface (ULS) and ULS curvature. The proposed method was able to localize damage in both damage scenarios for cantilever structures, but the conventional methods could not.

Keywords

References

  1. S. W. Doebling, C. R. Farrar, M. B. Prime and, D. W. Shevitz, "Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review," Los Alamos National Laboratory report LA-13070-MS (1996)
  2. H. Sohn, C. R. Farrar, F. M. Hemez, D. D. Shunk, D. W. Stinemates and B. R. Nadler, "A Review of structural health monitoring literature: 1996-2001," Los Alamos National Laboratory report LA-13976-MS (2004)
  3. W. Fan and P. Qiao, "Vibration-based damage identification methods: a review and comparative study," Structural Health Monitoring, Vol. 10, pp. 83-111 (2011) https://doi.org/10.1177/1475921710365419
  4. J. Zhao and J. T. Dewolf, "Sensitivity study for vibrational parameters used in damage detection," Journal of Structural Engineering, Vol. 125, pp. 410-416 (1999) https://doi.org/10.1061/(ASCE)0733-9445(1999)125:4(410)
  5. A. K. Pandey and M. Biswas, "Damage detection in structures using changes in flexibility," Journal of Sound and Vibration, Vol. 169, pp. 3-17 (1994) https://doi.org/10.1006/jsvi.1994.1002
  6. T. Toksoy and A. E. Aktan, "Bridgecondition assessment by modal flexibility," Experimental Mechanics, Vol. 34, pp. 271-278 (1994) https://doi.org/10.1007/BF02319765
  7. J. Wang and P. Qiao, "Improved damage detection for beam-type structures using a uniform load surface," Structural Health Monitoring, Vol. 6, pp. 99-110 (2007) https://doi.org/10.1177/1475921706072062
  8. D. Wu and S. S. Law, "Damage localization in plate structures from uniform load surface curvature," Journal of Sound and Vibration, Vol. 276, pp. 227-244 (2004) https://doi.org/10.1016/j.jsv.2003.07.040
  9. D. Bernal, "Load vectors for damage localization," Journal of Engineering Mechanics, Vol. 128, pp. 7-14 (2002) https://doi.org/10.1061/(ASCE)0733-9399(2002)128:1(7)
  10. Z. Duan, G. Yan, J. Qu, and B. F. Spencer, "Damage detection in ambient vibration using proportional flexibility matrix with incomplete measured DOFs," Structural Control and Health Monitoring, Vol. 14, pp. 186-196 (2005)
  11. Y. Gao and B. F. Spencer, "Online damage diagnosis for civil infrastructure employing a flexibility-based approach," Smart Materials and Structures, Vol. 15, pp. 9-19 (2006) https://doi.org/10.1088/0964-1726/15/1/030
  12. Y. Gao, B. F. Spencer, and D. Bernal, "Experimental verification of the flexibility-based damage locating vector method," Journal of Engineering Mechanics, Vol. 133, pp. 1043-1049 (2007) https://doi.org/10.1061/(ASCE)0733-9399(2007)133:10(1043)
  13. A. P. Adewuyi and Z. S. Wu, "Modal macro-strain flexibility methods for damage localization in flexural structures using long-gage FBG sensors," Structural Control and Health Monitoring, Vol. 18, pp. 341-360 (2010)
  14. E. Parloo, P. Verboven, P. Guillaume, and M. V. Overmeire, "Sensitivity-based operational mode shape normalization," Mechanical Systems and Signal Processing, Vol. 16, pp. 757-767 (2002) https://doi.org/10.1006/mssp.2002.1498
  15. E. Parloo, B. Cauberghe, F. Benedettini, R. Alaggio and P. Guillaume, "Sensitivitybased operational mode shape normalisation: Application to a bridge," Mechanical Systems and Signal Processing, No. 19, pp. 43-55 (2005) https://doi.org/10.1016/j.ymssp.2004.03.009
  16. R. Brincker and P. Andersen, "A way of getting scaled mode shapes in output only modal testing," In Proceedings of the 21th International Modal Analysis Conference (IMAC XXI), Kissimmee, Florida, USA, No. 141 (2003)
  17. D. Bernal, "Mass scaling from known mass perturbations," Journal of Engineering mechanics, No. 130, pp. 1083-1088 (2004) https://doi.org/10.1061/(ASCE)0733-9399(2004)130:9(1083)
  18. B. Cauberghe, "Applied frequency-domain system identification in the field of experimental and operational modal analysis," Ph. D. Thesis, Vrije Universiteit Brussel (2004)
  19. K. Y. Koo, S. H. Sung, J. W. Park and H. J. Jung, "Damage detection of shear buildings using deflections obtained by modal flexibility," Smart Materials and Structures, No. 19, pp. 115026 (2010) https://doi.org/10.1088/0964-1726/19/11/115026
  20. J. E. Mottershead and M. I. Friswell, "Model updating in structural dynamics: a survey," Journal of Sound and Vibration, No. 167, pp. 347-375 (1993) https://doi.org/10.1006/jsvi.1993.1340
  21. M. I. Friswell and J. E. T. Penny, "The practical limits of damage detection and location using vibration data," In: The 11th VPI & SU Symposium on Structural Dynamics and Control, Blacksburg, Virginia (1997)
  22. A. P. Adewuyi, Z. Wu and N. H. M. K. Serker, "Assessment of vibration-based damage identification methods using displacement and distributed strain measurements," Structural Health Monitoring, No. 8, pp. 443-461 (2009)