DOI QR코드

DOI QR Code

Oxidative Gelation of Dopamine-modified Polyaspartamides by NaIO4

NaIO4를 사용한 도파민-수식 폴리아스팔트아미드의 산화적 젤화

  • Jeon, Young Sil (School of Chemical Engineering, Sungkyunkwan University) ;
  • Bui, Quang Tri (School of Chemical Engineering, Sungkyunkwan University) ;
  • An, Jung Hyun (School of Chemical Engineering, Sungkyunkwan University) ;
  • Chung, Dong June (Department of Polymer Science & Engineering, Sungkyunkwan University) ;
  • Kim, Ji-Heung (School of Chemical Engineering, Sungkyunkwan University)
  • 전영실 (성균관대학교 화학공학부) ;
  • ;
  • 안중현 (성균관대학교 화학공학부) ;
  • 정동준 (성균관대학교 고분자공학과) ;
  • 김지흥 (성균관대학교 화학공학부)
  • Received : 2013.06.18
  • Accepted : 2013.09.24
  • Published : 2014.01.25

Abstract

Novel adhesive polyaspartamides containing catechol and primary amine pendent groups were synthesized through successive ring-opening aminolysis reactions of dopamine (DOP) and ethylenediamine (EDA) with polysuccinimide (PSI). The oxidative gelation of aqueous dopamine-modified polyaspartamide was observed by adding $NaIO_4$ as the oxidizing reagent. FTIR, UV-vis and oscillatory rheometry was used to elucidate the oxidative cross-linking toward gel formation. The prepared gel was characterized by the swelling degree, thermogravimetric analysis (TGA), and by scanning electronic microscopy (SEM).

도파민 및 에틸렌디아민의 폴리숙신이미드(polysuccinimide)와의 연속적인 개환 아미놀리시스 반응을 통해 카테콜 및 1차 아민기를 곁가지에 함유한 접착성 폴리아스팔트아미드를 합성하고, 산화제로서 $NaIO_4$를 사용한 상기 고분자 수용액의 산화적 젤화 반응을 관찰하였다. FTIR, UV-vis과 oscillatory rheometry를 이용하여 산화성 가교반응을 통한 젤 형성을 규명하고, 제조된 젤의 수팽윤도, 열중량분석(TGA) 및 SEM 모폴로지를 조사하였다.

Keywords

Acknowledgement

Supported by : National Research Foundation of Korea (NRF)

References

  1. J. H. Waite, Integr. Comp. Biol., 42, 1172 (2002). https://doi.org/10.1093/icb/42.6.1172
  2. J. H. Waite and M. L. Tanzer, Science, 212, 1038 (1981). https://doi.org/10.1126/science.212.4498.1038
  3. H. S. Lee, S. M. Dellatore, W. M. Miller, and P. B. Messersmith, Science, 318, 426 (2007). https://doi.org/10.1126/science.1147241
  4. J. H. Waite and X. X. Qin, Biochemistry, 40, 2887 (2001). https://doi.org/10.1021/bi002718x
  5. M. Yu and T. J. Deming, Macromolecules, 31, 4739 (1998). https://doi.org/10.1021/ma980268z
  6. A. R. Statz, R. J. Meagher, A. E. Barron, and P. B. Messersmith, J. Am. Chem. Soc., 125, 4253 (2003). https://doi.org/10.1021/ja0284963
  7. F. Xiaowu, L. Lijun, L. D. Jeffrey, and P. B. Messersmith, J. Am. Chem. Soc., 127, 15843 (2005). https://doi.org/10.1021/ja0532638
  8. B. P. Lee, L. D. Jeffrey, and P. B. Messersmith, Biomacromolecules, 3, 1038 (2002). https://doi.org/10.1021/bm025546n
  9. H. Shao, K. N. Bachus, and R. J. Stewart, Macromol. Biosci., 9, 464 (2009). https://doi.org/10.1002/mabi.200800252
  10. C. E. Brubaker, H. Kissler, L. J. Wang, D. B. Kaufman, and P. B. Messersmith, Biomaterials, 31, 420 (2010). https://doi.org/10.1016/j.biomaterials.2009.09.062
  11. H. S. Lee, Y. H. Lee, A. R. Statz, J. S. Rho, T. G. Park, and P. B. Messersmith, Adv. Mater., 20, 1619 (2008). https://doi.org/10.1002/adma.200702378
  12. K. Yamada, T. Chen, G. Kumar, O. Vesnovsky, L. D. T. Topoleski, and G. F. Payne, Biomacromolecules, 1, 252 (2000). https://doi.org/10.1021/bm0003009
  13. S. H. Ku, J. K. Ryu, S. K. Hong, H. S. Lee, and C. B. Park, Biomaterials, 31, 2535 (2010). https://doi.org/10.1016/j.biomaterials.2009.12.020
  14. E. P. Holowka and T. J. Deming, Macromol. Biosci., 10, 496 (2010).
  15. J. R. Moon and J. H. Kim, Polym. Int., 59, 630 (2010).
  16. J. R. Moon, M. W. Kim, D. J. Kim, J. H. Jeong, and J. H. Kim, Colloid Polym. Sci., 289, 63 (2010).
  17. J. R. Moon and J. H. Kim, Macromol. Res., 16, 489 (2008). https://doi.org/10.1007/BF03218549
  18. J. R. Moon, Y. H. Park, and J. H. Kim, J. Appl. Polym. Sci., 111, 998 (2009).
  19. J. H. Park, J. R. Moon, K. H. Hong, and J. H. Kim, J. Polym. Res., 18, 273 (2011). https://doi.org/10.1007/s10965-010-9415-3
  20. S. I. Kim, C. M. Son, Y. S. Jeon, and J. H. Kim, Bull. Korean Chem. Soc., 30, 3025 (2009). https://doi.org/10.5012/bkcs.2009.30.12.3025
  21. J. H. An, N. T. Huynh, Y. S. Jeon, and J. H. Kim, Polym. Int., 60, 1581 (2011). https://doi.org/10.1002/pi.3116