DOI QR코드

DOI QR Code

Design and Implementation of Oil Pump Control Systems Driven by a Brushless DC Electric Motor

BLDC 모터로 구동되는 오일 펌프 제어 시스템의 설계 및 구현

  • Received : 2013.11.05
  • Accepted : 2014.01.13
  • Published : 2014.01.31

Abstract

In this paper, we address the problem of designing and implementing an oil pump control system driven by a brushless DC (BLDC) motor. The proposed oil pump plays the role of providing fuel to the engine clutch and transmission of hybrid vehicles. Main consideration is given to enhancing response feature and accuracy of the oil pump by simplifying the controller that is driven by a BLDC motor under PWM voltage control, which is a standard control method for BLDC motors. The proposed control scheme also helps to increase efficiency and reliability of the oil pump system. To validate the performance of the proposed system, we conduct experiments on BLDC motor speed control and oil pump operations.

본 논문에서는 BLDC 모터로 구동되는 오일 펌프 제어 시스템을 설계하고 구현하는 문제를 다룬다. 제안된 오일 펌프는 하이브리드 차량에 장착되어 엔진 클러치와 변속기에 충분한 양의 작동유를 공급하는 역할을 한다. BLCD 모터로 구동되는 제어기를 단순화하여 전원 전압을 PWM 방식으로 직접 제어하는 일반적인 방법을 사용함으로써 응답성 및 정확성을 향상시키는 것을 주목적으로 한다. 제안된 제어 기법은 오일 펌프 장치의 효율성과 신뢰성을 높인다. BLCD 모터의 회전과 오일 펌프 가동 실험을 실시하여 제안된 기법의 성능을 검증한다.

Keywords

References

  1. O. Tremblay, L. Dessaint, and A. Dekkiche, "A Generic Battery Model for the Dynamic Simulation of Hybrid Electric Vehicles," In Proc. IEEE Vehicle Power and Propulsion Conf. (VPPC'07), 2007, pp. 284-289.
  2. S. Kim, K. Lee, S. Yeo, J. S. Hong, and Y. Park, "Implementation of successive approximate register typed A/D converter for a monitored battery voltage conversion," J. of the Korea Institute of Electronic Communication Sciences, vol. 6, no. 2, 2011, pp. 256-261.
  3. Y. Kim, J. Lee, C. Jo, Y. Kim, M. Song, J. Kim, and H. Kim, "Development and control of an electric oil pump for automatic transmission- based hybrid electric vehicle," IEEE Trans. Vehicular Technology, vol. 60, no. 5, 2011, pp. 1981-1990. https://doi.org/10.1109/TVT.2011.2140135
  4. J. Kim, "A robust sensorless speed control of sensorless BLDC motor," J. of the Korea Institute of Electronic Communication Sciences, vol. 3, no. 4, 2008, pp. 266-275.
  5. H. Lee, W. Cho, and K. Lee, "Improved switching method for sensorless BLDC motor drive," J. of the Korea Institute of Electronic Communication Sciences, vol. 5, no. 2, 2010, pp. 164-170.
  6. C. Gaviria, E. Fossas, and R. Grino, "Robust controller for a full-bridge rectifier using the IDA approach and GSSA modeling," IEEE Trans. Circuits and Systems-I: Regular Papers, vol. 52, no. 3, pp. 609-616, 2005. https://doi.org/10.1109/TCSI.2004.842881