References
- Hinrichsen, J. and Bautista, C., "The challenge of Reducing both Airframe Weight and Manufacturing Cost", Air & Space Europe, Vol. 3, Issue 3-4, 2001, pp. 119-121. https://doi.org/10.1016/S1290-0958(01)90072-3
- Croft, K., Lessard, L., Pasini, D., Hojjati, M., Chen, J. and Yousefpour, A., "Experimental Study of the Automated Fiber Placement Induced Defects on Performance of Composite Laminates", Composites Part A, Vol. 42, Issue 5, 2011, pp. 484- 491. https://doi.org/10.1016/j.compositesa.2011.01.007
- Russel, D., Kyle, J. and Peter, V., "High-Speed Fiber Placement on Large Complex Structures", SAE international, 2007-01-3843.
- John, M., "Applying Automation to the Fabrication of Composite based Aerospace Parts and Developing a Machine Specification", Accudyne Systems Inc., USA.
- Clarke, R. R., Engwall L.D., Yonash G. M. and New, A. J., "Unidirectional, Multi- head Fiber Placement", United States patent 7048024 B2, 2005.
- Engwall L. D., Yonash, G. M., Clark R. R. and New, A. J., "Automated Composite Lay-up to an Internal Fuselage Mandrel", United States patent 7083698B2, 2006.
- Hanson F. S., "Rapid Reconfigurable Fuselage Mandrel", United States patent 7648661 B2, 2010.
- Benson M. V., Gill, R.D., Nielsen P.J., Mansouri, H. and Shepherd, I. N., "Multiple Axes Fiber Placement Machine", United States patent 6096164, 2000.
- Thomas M. M., Glowasky A. R., Mcllroy E. B. and Story A.T., "Manufacturing of Smart Structures using Fiber Placement Manufacturing Processes", 266/SPIE, Vol. 2447, 1995, pp. 266-273.
- Farinelli, C., Kim, H.-I. and Han, J.-H., "Feasibility Study to Actively Compensate Deformations of Composite Structure in a Space Environment", International Journal of Aeronautical Space Sciences, Vol. 13, No. 2, 2012, pp. 221-228. https://doi.org/10.5139/IJASS.2012.13.2.221
- Measom, R. and Sewell, K., "Fiber Placement Low-cost Production for Complex Composite Structures", Proceedings of the American helicopter society 52nd annual forum, Washington DC, USA, 1996.
- Sawicki, A., Schulze, E., Fitzwater, L. and Harris, K., "Structural Qualification of V-22 EMD Tow-placed Aft Fuselage", Proceedings of the American helicopter society 51st annual forum, Fort Worth TX, USA, 1995, pp. 1641-1653.
- Simon, S., Mostafa, R., "Automated Fiber Placement including Layup Mandrel Tool", European patent 2631062 A1, 2013.
- Howe, D., Aircraft Loading and Structural Layout, Professional Engineering Publishing, London, 2004.
-
Boeing Material Specification, "BMS 276 Advanced Composites - 350
$^{\circ}F$ Cure Toughened - epoxy Preimpregnated Carbon Fiber Tapes and Fabrics", Boeing Corporation, Chicago, USA. - Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM Standard D3039/D 3039M.
- Standard Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture, ASTM Standard D6641 / D6641 M.
- Poon, C., "Tensile fracture of notched laminates", National Research Council of Canada, 1991.
- Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials With Unsupported Gage Section by Shear Loading, ASTM Standard D3410/ D3410M.
- Soutis, C., "Compressive Fracture of Orthotropic Laminates containing Open Holes due to Fibre Microinstability", Proceedings of ICF 10, Honolulu, USA, 2001.
- Jones, R. M., Mechanics of Composite Materials, Taylor & Francis, New-York, 1999.
- Nawab, T., Jacquemin, F., Casari, P., Boyard, N., Borjon-Piron, Y. and Sobotka, V., "Study of Variation of Thermal Expansion Coefficients in Carbon/Epoxy Laminated Composite Plates", Composites Part B, Vol. 50, July 2013, pp. 144-149. https://doi.org/10.1016/j.compositesb.2013.02.002
- Park, Y.-B., Nguyen, K.H., Kweon, J.-H., Choi, J.-H. and Han, J.-S., "Structural Analysis of a Composite Target-drone", International Journal of Aeronautical Space Sciences, Vol. 12, No. 1, 2011, pp. 84-91. https://doi.org/10.5139/IJASS.2011.12.1.84
- Noh, J. and Whitcomb, J., "Effect of Various Parameters on the Effective Properties of a Cracked Ply", Journal of composite materials, Vol. 35, Issue 8, 2001, pp. 689-712. https://doi.org/10.1177/002199801772662055
Cited by
- Manufacturing and Structural Analysis of Thick Composite Spar Using AFP Machine vol.28, pp.4, 2015, https://doi.org/10.7234/composres.2015.28.4.212