DOI QR코드

DOI QR Code

Cyclic testing of steel column-tree moment connections with various beam splice lengths

  • Lee, Kangmin (Department of Architectural Engineering, Chungnam National University) ;
  • Li, Rui (Department of Architectural Engineering, Chungnam National University) ;
  • Chen, Liuyi (Department of Architectural Engineering, Chungnam National University) ;
  • Oh, Keunyeong (Department of Architectural Engineering, Chungnam National University) ;
  • Kim, Kang-Seok (Facilities Operations Team, Daejeon-Chungnam District Division, Korea Electric Power CO)
  • 투고 : 2013.07.02
  • 심사 : 2013.10.29
  • 발행 : 2014.02.25

초록

The purpose of this study was to evaluate the cyclic behavior of steel column-tree moment connections used in steel moment resisting frames. These connections are composed of shop-welded stub beam-to-column connection and field bolted beam-to-beam splice. In this study, the effects of beam splice length on the seismic performance of column-tree connections were experimentally investigated. The change of the beam splice location alters the bending moment and shear force at the splice, and this may affect the seismic performance of column-tree connections. Three full-scale test specimens of column-tree connections with the splice lengths of 900 mm, 1,100 mm, and 1,300 mm were fabricated and tested. The splice lengths were roughly 1/6, 1/7, 1/8 of the beam span length of 7,500 mm, respectively. The test results showed that all the specimens successfully developed ductile behavior without brittle fracture until 5% radians story drift angle. The maximum moment resisting capacity of the specimens showed little differences. The specimen with the splice length of 1,300 mm showed better bolt slip resistance than the other specimens due to the smallest bending moment at the beam splice.

키워드

참고문헌

  1. AISC (2010), Seismic Provision for Structural Steel Building, American Institute of Steel Structure, Chicago, IL, USA.
  2. Astaneh-Asl, A. (1997), "Seismic design of steel column-tree moment-resisting frames", Struct. Steel Edu. Council.
  3. Chen, C.C., Lin, C.C. and Lin, C.H. (2006), "Ductile moment connections used in steel column-tree moment-resisting frames", J. Construct. Steel Res., 62(8), 793-801. https://doi.org/10.1016/j.jcsr.2005.11.012
  4. Chen, C.C. and Lin, C.C. (2013), "Seismic performance of steel beam-to-column moment connections with tapered beam flanges", Eng. Struct., 48, 588-601. https://doi.org/10.1016/j.engstruct.2012.10.003
  5. Chou, C.C., Tsai, K.C., Wang, Y.Y. and Jao, C.K. (2010), "Seismic rehabilitation performance of steel side plate moment connections", Earthq. Eng. Struct. Dyn., 39(1), 23-44.
  6. Drosopoulos, G.A., Stavroulakis, G.E. and Abdalla, K.M. (2012), "3D Finite element analysis of end-plate steel joints", Steel Compos. Struct., Int. J., 12(2), 93-115.
  7. FEMA (2000), Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings: FEMA-350, SAC Joint Venture, Richmond, CA, USA.
  8. Girao Coelho, A.M. and Bijlaard, F.S.K. (2007), "Experimental behavior of high strength steel end-plate connections", J. Construct. Steel Res., 63(9), 1228-1240. https://doi.org/10.1016/j.jcsr.2006.11.010
  9. Han, S.W., Kwon, G.U. and Moon, K.H. (2007), "Cyclic behaviour of post-Northridge WUF-B connections", J. Construct. Steel Res., 63(3), 365-374. https://doi.org/10.1016/j.jcsr.2006.05.003
  10. Jones, S.L, Fry, G.T. and Engelhardt, M.D. (2002), "Experimental evaluation of cyclically loaded reduced beam section moment connections", J. Struct. Eng., 128(4), 441-451. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(441)
  11. Kim, T., Whittaker, A.S., Gilani, A.S.J., Bertero, V. and Takhirov, S. (2002), "Experimental evaluation of plate-reinforced steel moment-resisting connections", J. Struct. Engi., 128(4), 483-491. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(483)
  12. Mahin, S.T. (1998), "Lessons from damage to steel buildings during the Northridge earthquake", Eng. Struct., 20(4-6), 261-270. https://doi.org/10.1016/S0141-0296(97)00032-1
  13. McMullin, K.M. and Astaneh-Asl, A. (2003), "Steel semirigid column-tree moment resisting frame seismic behavior", J. Struct. Eng., 129(9), 1243-1249. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:9(1243)
  14. Miller, D.K. (1998), "Lessons learned from the Northridge earthquake", Eng. Struct., 20(4-6), 249-260. https://doi.org/10.1016/S0141-0296(97)00031-X
  15. Roeder, C.W. (2002), "Connection performance for seismic design of steel moment frames", J. Struct. Eng., 128(4), 517-525. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(517)
  16. Tabar, A.M. and Deylami, A. (2006), "Investigation of major parameters affecting instability of steel beams with RBS moment connections", Steel Compos. Struct., Int. J., 6(3), 203-219. https://doi.org/10.12989/scs.2006.6.3.203
  17. Valipour, H.R. and Bradford, M.A. (2013), "Nonlinear P-$\Delta$ analysis of steel frames with semi-rigid connections", Steel Compos. Struct., Int. J., 14(1), 1-20. https://doi.org/10.12989/scs.2013.14.1.001

피인용 문헌

  1. Cyclic testing of weak-axis column-tree connections with formation of plastic hinge at beam splice vol.8, pp.5, 2015, https://doi.org/10.12989/eas.2015.8.5.1039
  2. Seismic performance evaluation of Korean column-tree steel moment connections vol.16, pp.4, 2016, https://doi.org/10.1007/s13296-016-0089-5
  3. Experimental and numerical analysis of beam to column joints in steel structures vol.12, pp.4, 2018, https://doi.org/10.1007/s11709-017-0457-z
  4. Modification of pre-Kobe column-tree moment resisting connection vol.19, pp.2, 2014, https://doi.org/10.1007/s42107-018-0019-2
  5. Effect of bolted splice within the plastic hinge zone on beam-to-column connection behavior vol.28, pp.6, 2014, https://doi.org/10.12989/scs.2018.28.6.767
  6. Evaluation of the moment-rotation curve of steel beam-to-column joints with flange-plate vol.21, pp.3, 2014, https://doi.org/10.1007/s42107-019-00213-2
  7. Seismic fragility analysis of steel intermediate moment frames with column-tree connections vol.44, pp.None, 2014, https://doi.org/10.1016/j.jobe.2021.102955