Korean Chemical Engineering Research

The Korean Institute of Chemical Engineers (한국화학공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Flame Resistance and Combustion Characteristics of MDF Plywood

MDF합판의 방염 및 연소특성에 관한 연구

  • Kim, In-Beom (Department of Fire Protection Administration, Kyungmin College)
  • 김인범 (경민대학교 소방행정과)
  • Received : 2013.10.31
  • Accepted : 2013.12.29
  • Published : 2014.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

Interior of the building is used as a MDF plywood if there is a fire in order to delay the ignition, flame retardant paint, flame retardant solution and flame retardant film are being handled by the flame retardant. Combustion characteristics anf flame retardant performance results can be summarized as follows: General film with a sample showed that short of the criteria in terms of carbonation area, and the results of flame retardant paint, flame retardant solution and flame retardant film products satisfied the criteria. Toxic gases generated in the combustion process results in a film samples using a high incidence of carbon monoxide and the creation of a smoke could be seen. This confirm that is estimated that result from incomplete combustion of PVC film that attach, and displays high toxicity index and hazard class relatively.

건축물 내부의 장식을 위해 사용되는 MDF합판은 화염의 착화를 지연시키기 위해 방염처리하도록 규정하고 있어 일반적으로 방염도료나 방염액 또는 방염필름 등을 적용하여 착화를 지연시키는데 이 때 적용하는 시료에 따라 방염성능과 연소 시 발생되는 가스의 유독성의 차이가 발생할 수 있어 본 연구에서는 MDF에 적용된 방염시료들의 방염성능 및 연소특성에 대해 비교분석하였으며 그 결과 방염성능에 부합하는 제품이 확인되었으나 방염처리방법에 따라 방염성능의 차이가 존재함을 확인할 수 있었으며 연소과정에서 발생되어지는 여러 종류의 유독가스의 영향도 함께 고려해야 할 요소임을 확인할 수 있었다.

Keywords

References

  1. Installation Maintenance Fire Protection and Safety Management Act, Article 20, Paragraph 2.
  2. Park, S. H., "Effective Flame-Proofing Measures for On-site Flame-proofing-treated Items with Businesses," M.D thesis, Dongshin University, Naju(2009).
  3. Park, H. J. and Kwak, D. I., "A Research on Legal Alternatives to Fire Performance Certificate and Tests for Interior Finish, Decorative Materials in Premises Used as Assemblies," J. of Korean Institute of Fire Sci. & Eng., 15(1), 45-54(2001).
  4. Cha, J. M., Hyun,. S. H., Kim, I. B. and Yoon, M. O, "A Study on the Flame retardant Performance of MDF Wood According to Flame retardant Treatment Method," J. of Korean Institute of Fire Sci. & Eng., 25(6), 146-155(2011).
  5. Mok, Y. I., "A Review of the Flame Retardation of Flammable Polymers," Korean Chem. Eng. Res.(HWAHAK KONGHAK), 15(4), 211-224(1977).
  6. Hilado, C. J., "Flammability Handbook for Plastics," 4th ed., Technomic Publishing Co., Pennsylvania, 1990.
  7. Dobele, G., Urbanovich, I., Zhurins, A., Kampars, V. and Meier, D., "Application of Analytical Pyrolysis for Wood Fire Protection Control," J. Anal. Appl. Pyrolysis, 79, 47-51(2007). https://doi.org/10.1016/j.jaap.2006.10.019
  8. Grexa, O. and Lubke, H., "Flammability Parameters of Wood Tested on a Cone Calorimeter," Polym. Degrad. Stab. 427-432(2001).
  9. Lim, N. G., Her, J. W. and Park, C. W., "An Experimental Study on Flame Resistant Performance by Flame Resistant Method and Agents," J. of Korean Institute of Build. Constuct., 8(6), 117-122(2008). https://doi.org/10.5345/JKIC.2008.8.6.117
  10. Lee, J. W., "Burning Behavior of Interior Materials in the Cone Calorimeter and Evaluation of Toxic of Smoking," M. D. thesis, Bukyung University, Busan(2008).
  11. Kang, S. D., "Experimental Study on the Toxic Gases Released from the Floor Finishing Materials in Entertainment Service Industry Buildings," M. D. thesis, Seoul city University, Seoul(2002).
  12. Han, O. S., Han, I. S., Choi, Y. R., Lee, J. S. and Lee, S. H., "Characteristics of Flames Propagating Through Combustible Particles Concentration in a Vertical Duct," Korean Chem. Eng. Res.(HWAHAK KONGHAK), 49(1), 41-46(2011). https://doi.org/10.9713/kcer.2011.49.1.041
  13. Park, D. J. and Lee, Y. S., "Experimental Investigation of Explosion Pressures and Flame Propagations by Wall Obstruction Ratios and Ignition Positions," Korean J. Chem. Eng., 29(2), 139-144(2012). https://doi.org/10.1007/s11814-011-0159-5
  14. National Emergency Management Agency, Notice no. 2012-114, "Performance Standard of Flame Retardant".
  15. National Emergency Management Agency, Notice no. 2009-31, "Technical Standards of Flame Retardant Product Performance".
  16. DS 02-713(Defence Standard 02-713), "Determination of the Toxicity Index of the Products of Combustion from Small Specimens of Materials; Issue 2"(2002).

Cited by

  1. Study on the Excellent Heat Resistance Organic-Inorganic Hybrid Flame Retardant vol.30, pp.3, 2016, https://doi.org/10.7731/KIFSE.2016.30.3.067
  2. 유-무기 하이브리드 방염제의 성능특성에 관한 연구 vol.31, pp.4, 2017, https://doi.org/10.7731/kifse.2017.31.4.012
  3. 소방 실화재 훈련에서 사용하는 압축목재 가연물에서 발생하는 유해물질 특성 vol.46, pp.5, 2014, https://doi.org/10.5668/jehs.2020.46.5.555