한국전산유체공학회지 (Journal of computational fluids engineering)

한국전산유체공학회 (Korean Society of Computational Fluids Engineering)
권호 표지
DOI QR코드

DOI QR Code

정밀제어용 버터플라이 밸브의 유동특성에 관한 연구

STUDY ON FLOW CHARACTERISTICS FOR PRECISION CONTROL BUTTERFLY VALVE

  • 투고 : 2013.08.28
  • 심사 : 2014.03.03
  • 발행 : 2014.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Butterfly valve is a valve that controls fluid flow depending on the size of the opening angle. In general, the size of the opening angle of the valve increases, the fluid flow has also increased sharply. However, sometimes, in a specific piping system, a particular operating condition is needed that the fluctuation of the fluid flow should not have large amount although the size of opening angle of the valve become larger. In butterfly value, the shape of a typical thin plate, it is impossible to control a minute fluid, but in thick plate type, it is possible. In this study, we got the fluid flow control characteristics and pressure drop through both a numerical method and an experimental method about thick plate type. The numerical result and experimental result of flow coefficient show a similar pattern. In addition, we could find that minute fluid flow control was possible in the area of small size of the opening angle.

키워드

참고문헌

  1. 2007, Go, K.C., Contrlo Valve Handbook, Hongreung Science Books.
  2. 2006, Oh, S.H., Lee, Y.H., Kang, H.G., Song, X.G., Kang, J.H. and Park, Y.C., "A Study on Relationship of Flow Coefficient and Valve Type for Design of Butterfly Valve," Journal of Navigation and Port Research, Vol.30, No.2, pp.373-377.
  3. 1996, Huang, C. and Kim, R.H., "Three-Dimensional Analysis of Partially Open Butterfly Valve Flows," Journal of Fluids Engineering, Vol.118, No.3, pp.562-568. https://doi.org/10.1115/1.2817795
  4. 1995, Ogawa, K. and T. Kimura, "Hydrodynamic Characteristics of a Butterfly Valve-Prediction of Torque Characteristics," ISA transations : Publication of Instrument Society of America, Vol.34, No.4, pp.327-333.
  5. 2004, Yoon, J.Y., Lee, S.J. and Kim, E.S., "Numerical Analysis of Flows in Butterfly Valves to Prevent Cavitation," Journal of Fluid Machinery, Vol.7, No.1, pp.9-16. https://doi.org/10.5293/KFMA.2004.7.1.009
  6. 2007, Ogawa, K., "Cavition Noise Reduction Around a Butterfly Valve by Semicircular Fins," ASME Journal of Fluids Engineering, pp.397-402.
  7. 2008, Kim, S.W., Kim, S.W., Choi, Y.D., Kim, B.S., Kim, Y.H., "Flow Characteristics of Cryogenic Butterfly Valve for LNG," Journal of Fluid Machinery, Vol.11, No.2, pp.20-28. https://doi.org/10.5293/KFMA.2008.11.2.020
  8. 2008, Kim, S.D. Kim, B.S., Choi, Y.D., and Lee, Y.H., "Prediction of Cavitation Occurrence in a Cryogenic Butterfly Valve by Flow Velocity," Journal of the Korean Society of Marine Engineering, Vol.32, No.6, pp.923-930. https://doi.org/10.5916/jkosme.2008.32.6.923
  9. 2007, Kim, S.W., "A Study on the Flow Characteristics of Cryogenic Butterfly Valve for LNG Carrier," Department of Mechanical Engineering Graduate School, Korea Maritime University.
  10. 2007, ANSYS Inc, CFX-Solver 13.0
  11. 1985, Instrument Society of America ANSI/ISA S75.01 "Flow Equation for Sizing Control Valves", Instrument Society of America, Research Triangle Park, North Carolina, USA.

피인용 문헌

  1. A Study on the Flow Characteristics of Reed Valve with Variable Geometric Variations for Cryogenic Linear Expander vol.12, pp.4, 2015, https://doi.org/10.7839/ksfc.2015.12.4.048
  2. Numerical Analysis for Performance Prediction of Butterfly Valves with Baffles vol.23, pp.3, 2014, https://doi.org/10.9726/kspse.2019.23.3.057
  3. Numerical Analysis for Performance Prediction of Butterfly Valves with Baffles vol.23, pp.3, 2014, https://doi.org/10.9726/kspse.2019.23.3.057