DOI QR코드

DOI QR Code

Reliability-based design of prestressed concrete girders in integral Abutment Bridges for thermal effects

  • Kim, WooSeok (Civil Engineering, Chungnam National University) ;
  • Laman, Jeffrey A. (Civil and Environmental Engineering, Pennsylvania State University) ;
  • Park, Jong Yil (Safety Engineering, Seoul National University of Science and Technology)
  • 투고 : 2013.04.17
  • 심사 : 2014.03.20
  • 발행 : 2014.05.10

초록

Reliability-based design limit states and associated partial load factors provide a consistent level of design safety across bridge types and members. However, limit states in the current AASHTO LRFD have not been developed explicitly for the situation encountered by integral abutment bridges (IABs) that have unique boundary conditions and loads with inherent uncertainties. Therefore, new reliability-based limit states for IABs considering the variability of the abutment support conditions and thermal loading must be developed to achieve IAB designs that achieve the same safety level as other bridge designs. Prestressed concrete girder bridges are considered in this study and are subjected to concrete time-dependent effects (creep and shrinkage), backfill pressure, temperature fluctuation and temperature gradient. Based on the previously established database for bridge loads and resistances, reliability analyses are performed. The IAB limit states proposed herein are intended to supplement current AASHTO LRFD limit states as specified in AASHTO LRFD Table 3.4.1-1.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. American Association of State Highway and Transportation Officials (AASHTO LRFD) (2010), AASHTO LRFD bridge design specifications, Washington, D.C.
  2. Arockiasamy, M., Butrieng, N. and Sivakumar, M. (2004), "State-of-the-art of integral abutment bridges: design and practice", J. Bridge Eng., 9(5), 497-506. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:5(497)
  3. Cheung, M.S. and Li, W.C. (2002), "Reliability assessment in highway bridge design", Can. J. Civil Eng., 29, 799-805. https://doi.org/10.1139/l02-079
  4. Hamutcuoglu, O. and Scott, M.H. (2009), "Finite element reliability analysis of bridge girders considering moment-shear interaction", Struct. Saf., 31(5), 356-362. https://doi.org/10.1016/j.strusafe.2009.02.003
  5. Hueste, M.B.D., Chompreda, P., Trejo, D., Cline, D.B.H. and Keating, P.B. (2004), "Mechanical properties of high-strength concrete for prestressed members", ACI Struct. J., 101(S45), 457-465.
  6. Kim, W. and Laman, J.A. (2010a), "Long-term numerical analysis of integral abutment bridges", Eng. Struct., 32(8), 2247-2257. https://doi.org/10.1016/j.engstruct.2010.03.027
  7. Kim, W. and Laman, J.A. (2010b), "Integral abutment bridge response under thermal loading", Eng. Struct., 32(6), 1495-1508. https://doi.org/10.1016/j.engstruct.2010.01.004
  8. Kim, W. and Laman, J.A. (2012), "7-year field monitoring of four integral abutment bridges", J. Perform. Constr. Facil., 26(1), 54-64. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000250
  9. Kim, W. and Laman, J.A. (2013), "Integral abutment bridge behavior under uncertain thermal and timedependent load", Struct. Eng. Mech., 46(1), 53-73. https://doi.org/10.12989/sem.2013.46.1.053
  10. Nowak, A.S. (1995), "Calibration of LRFD Bridge Code", ASCE J. Struct. Eng., 121(8), 1245-1251. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:8(1245)
  11. Nowak, A.S. and Collins, K.R. (2000) Reliability of Structures, ISBN 0-07-048163-6, CRC, US.
  12. Nowak, A.S. and Szerszen, M.M. (2003), "calibration of design code for buildings (ACI 318): part 1- statistical models for resistance", ACI Struct. J., 100(3), 377-382.
  13. Rackwitz, R. and Fiessler, B. (1978), "Structural reliability under combined random load sequences", Comput. Struct., 9, 489-494. https://doi.org/10.1016/0045-7949(78)90046-9
  14. Stewart, M.G. (2001), "Reliability-based assessment of ageing bridges using risk ranking and life cycle cost decision analyses", Reliab. Eng. Syst. Saf., 74(3), 263-273. https://doi.org/10.1016/S0951-8320(01)00079-5
  15. Tabsh, S.W. and Nowak, A.S. (1991), "Reliability of highway girder bridges", ASCE J. Struct. Eng., 117(8), 2373-2388.

피인용 문헌

  1. Strengthened and flexible pile-to-pilecap connections for integral abutment bridges vol.20, pp.4, 2016, https://doi.org/10.12989/scs.2016.20.4.731
  2. Design of integral abutment bridges for combined thermal and seismic loads vol.9, pp.2, 2015, https://doi.org/10.12989/eas.2015.9.2.415
  3. An efficient simulation method for reliability analysis of systems with expensive-to-evaluate performance functions vol.55, pp.5, 2015, https://doi.org/10.12989/sem.2015.55.5.979
  4. Comparative study of integral abutment bridge structural analysis methods vol.43, pp.4, 2016, https://doi.org/10.1139/cjce-2015-0202
  5. Buckling behavior of steel girder in integral abutment bridges under thermal loadings in summer season during deck replacement vol.16, pp.4, 2016, https://doi.org/10.1007/s13296-016-0023-x
  6. Evaluating fire resistance of prestressed concrete bridge girders vol.62, pp.6, 2014, https://doi.org/10.12989/sem.2017.62.6.663
  7. Optimum shape and length of laterally loaded piles vol.68, pp.1, 2014, https://doi.org/10.12989/sem.2018.68.1.121
  8. Challenges and opportunities for the application of integral abutment bridges in earthquake-prone areas: A review vol.135, pp.None, 2020, https://doi.org/10.1016/j.soildyn.2020.106183