한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제22권4호
  • /
  • Pages.82-88
  • /
  • 2014
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지
DOI QR코드

DOI QR Code

자동차 시트의 리크라이너 케이스에 대한 구조 강도 해석

Structural Strength Analysis on Recliner Case of Automotive Seat

  • 한문식 (계명대학교 기계자동차공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Han, Moonsik (Department of Mechanical & Automotive Engineering, Keimyung University) ;
  • Cho, Jaeung (Department of Mechanical & Automotive Engineering, Kongju National University)
  • 투고 : 2013.07.30
  • 심사 : 2013.10.07
  • 발행 : 2014.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recliner of automotive seat has the function to control the angle and has a close relation to the safety of seat. Therefore each of parts constituting recliner is important and recliner case to protect these parts from various dynamic loads is also important. As two kinds of recliner cases are designed and analyzed before manufacturing these products, this study result can be contributed to the strength durability.

키워드

참고문헌

  1. S. N. Park, "Development Trend of Car Seat Technology," Auto Journal, KSAE, Vol.31, No.4, pp.26-33, 2009.
  2. J. H. Kim, D. U. Park, J. H. Lee, M. K. Kim and W. S. Yoo, "Evaluation of Ride Comfort considering Seat Vibration," KSAE Spring Conference Proceedings, pp.535-987, 2002.
  3. H. Y. Kim, J. M. Kim, J. G. Choi, K. T. Lee and D. J. Lee, "Structural Analysis for the Development of Round Recliner," KSAE Fall Conference Proceedings, pp.1361-1366, 2003.
  4. J. F. Pywell, "Automotive Seat Design Affecting Comport and Safety," SAE 930108, pp.142-151, 1993.
  5. R. Nagpal and E. Y. Kuo, "A Time-domain Fatigue Life Prediction Methhod for Vehicle Body Structures," SAE 960567, pp.607-616, 1996.
  6. H. Y. Lee, J. Y. Lim and H. T. Bom, "A Study on the Structural Analysis of Car Seat Frame," KSAE Fall Conference Proceedings, pp.170-176, 1997.
  7. J. U. Cho, K. S. Kim, D. S. Choi, S. H. Kim, S. O. Bang and C. K. Cho, "Development of Plastic Suspension System for Automotive Seat," Journal of KAIS, Vol.12, No.3, pp.1091-1097, 2011. https://doi.org/10.5762/KAIS.2011.12.3.1091
  8. J. U. Cho and M. S. Han, "Structural Safety Analysis of Clutch System," Transactions of KSAE, Vol.19, No.5, pp.148-155, 2011.